List of Oral/Poster Presentations
| #340: A physically accurate numerical model to simulate deformable membranes [Session S11; Room 405, Topics: Bio-Fluids] |
Anirudh Asuri Mukundan (University of British Columbia); Anthony Wachs (University of British Columbia) |
| #819: Improvement of organ decellularization and recellularization process with multiphase flow technology [Session S11; Room 405, Topics: Bio-Fluids] |
Akari Misawa (Tokyo Metropolitan University); Rinka Matsui (Tokyo Metropolitan University); Van Lap Nguyen (Tokyo Metropolitan University); Hiromichi Obara (Tokyo Metropolitan University) |
| #831: Cell incubation and manipulation technology with liquid-liquid double layer system [Session S11; Room 405, Topics: Bio-Fluids] |
Tatsuki Kagiya (Tokyo Metropolitan University); Weijun Zhu (Tokyo Metropolitan University); Rei Ebihara (Tokyo Metropolitan University); Hiromichi Obara (Tokyo Metropolitan University) |
| #27: Buoyancy driven bubbly flows: meso-scale structures and relative motion [Session S9; Room 501, Topics: Bubbly Flows] |
Yann Mezui (LEGI-UGA); Martin Obligado (LEGI-UGA); Alain H Cartellier (UGA, CNRS, Grenoble-INP / LEGI) |
| #68: Mutable bubble surface mobility in water – alcohol mixtures and its impact on bubble motion and deformation [Session S10; Room 501, Topics: Bubbly Flows] |
Pavlína Basařová (UCT Prague); Sandra Orvalho (Institute of Chemical Process Fundamentals of the CAS); Jakub Crha (UCT Prague, Institute of Chemical Process Fundamentals of the CAS); Lucie Pilikova (UCT Prague) |
| #106: Three-phase flow analysis of rising shallow methane hydrate in gas lift system [Session S11; Room 501, Topics: Bubbly Flows] |
Yoshinari Kidaka (Osaka University); Kazuyasu Sugiyama (Osaka University) |
| #111: Experiments and modelling of near-horizontal bubbly flow [Session S11; Room 501, Topics: Bubbly Flows] |
Jørn Kjølaas (SINTEF); Diana Gonzalez (SINTEF); Heiner Schumann (SINTEF) |
| #224: Coarse-grained simulations of the turbulence induced by a bubble swarm [Session S7; Room 501, Topics: Bubbly Flows] |
Florian Le Roy de Bonneville (IMFT / CEA); Rémi Zamansky (IMFT); Frédéric Risso (CNRS-IMFT); Anne Boulin (CEA); Jean-François Haquet (CEA) |
| #268: Euler-Euler simulation of multiphase submerged jets [Session S8; Room 501, Topics: Bubbly Flows] |
Vikrant Vinayak Msc. Kamble (Helmholtz-Zentrum Dresden-Rossendorf / Dresden University of Technology); Roland Rzehak (Helmholtz-Zentrum Dresden-Rossendorf) |
| #298: New approaches for detecting the main transition velocities in a bubble column operated with aqueous solutions of ethanol and iso-propanol [Session S12; Room 501, Topics: Bubbly Flows] |
Stoyan N Nedeltchev (Polish Academy of Sciences, Institute of Chemical Engineering); Jakub Katerla (Polish Academy of Sciences, Institute of Chemical Engineering); Sara Marchini (Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics); Ragna Kipping (Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics); Michael Knobel (Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics); Markus Schubert (Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics); Uwe Hampel (Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics) |
| #301: Experimental study on the evolution of turbulent structures in a near field bubbly jet with low void fraction [Poster Session; Reception Hall] |
Hyunduk Seo (Pusan National University); Kyung Chun Kim (Pusan National University) |
| #309: Effects of the boundary conditions at the gas-liquid interface on single hydrogen bubble growth in alkaline water electrolysis [Session S10; Room 501, Topics: Bubbly Flows] |
Faeze Khalighi (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology); Bert Vreman (Eindhoven University of Technology) |
| #314: Study of hydrodynamics in a counter current bubble column [Session S12; Room 501, Topics: Bubbly Flows] |
Haris Khan (Helmholtz-Zentrum Dresden - Rossendorf (HZDR)); Roland Rzehak (Helmholtz-Zentrum Dresden - Rossendorf (HZDR)); Peter Kovats (Otto-von-Guericke-University Magdeburg (OVGU)); Katharina Zaehringer (Otto-von-Guericke-University Magdeburg (OVGU)) |
| #410: The shear-induced lift force on freely moving and deformable bubbles [Session S10; Room 501, Topics: Bubbly Flows] |
Niklas Hidman (Chalmers University of Technology); Henrik Ström (Chalmers University of Technology); Srdjan Sasic (Chalmers University of Technology); Gaetano Sardina (Chalmers University of Technology) |
| #415: Bubble dynamics under the influence of marangoni force induced by stratified contamination [Session S10; Room 501, Topics: Bubbly Flows] |
Sadra Mahmoudi (Johannes Kepler University Linz - JKU); Mahdi Saeedipour (Johannes Kepler University); Mark W. Hlawitschka (Johannes-Kepler-University Linz) |
| #438: A stochastic computational method for bubbly flows with first steps towards representing inception [Session S8; Room 501, Topics: Bubbly Flows] |
Anand Radhakrishnan (Georgia Institute of Technology); Henry A Le Berre (Georgia Institute of Technology); Spencer H Bryngelson (Georgia Institute of Technology); Jose Rodolfo Chriem (California Institute of Technology); Tim Colonius (Caltech) |
| #447: Estimation of the diffusion of bubbles injected for the air lubrication on a flat-bottom ship [Session S12; Room 501, Topics: Bubbly Flows] |
Hyun Jin Park (Hokkaido University); Yuichi Murai (Hokkaido University); Tatsuya Hamada (National Maritime Research Institute); Chiharu Kawakita (National Maritime Research Institute) |
| #500: Study on observation of flow states by ultrasonic measurement for upward gas-liquid multiphase flow in a pipe [Session S9; Room 501, Topics: Bubbly Flows] |
Ryota Obana (The University of Tokyo); Kohei Maehara (The University of Tokyo); Kazuya Shimizu (The University of Tokyo); Shu Takagi (The University of Tokyo) |
| #503: Gas-liquid gravity-driven exchange flow [Session S9; Room 501, Topics: Bubbly Flows] |
Cyril Vettorello (Institut de Mécanique des Fluides de Toulouse); Olivier Praud (IMFT); Véronique Roig (IMFT) |
| #552: Free-surface-entrained bubbly flow inside an unbaffled stirred tank [Session S8; Room 501, Topics: Bubbly Flows] |
Hyungyu Sung (Seoul National University); Hyungmin Park (Seoul National University) |
| #560: Measuring the liquid velocities at the wall of the rectangular Limerick bubble column [Session S12; Room 501, Topics: Bubbly Flows] |
Saikat Bhowmick (University of Limerick, School of Engineering,Bernal Institute); Harry E.A. Van den Akker (University of Limerick, School of Engineering, Bernal Institute) |
| #583: A numerical investigation on the horizontal clustering of rising air bubbles [Session S8; Room 501, Topics: Bubbly Flows] |
Ingu Lee (Seoul National University); Haecheon Choi (Seoul National University) |
| #631: The passive scalar spectrum of bubble-induced turbulence. [Session S7; Room 501, Topics: Bubbly Flows] |
Niklas Hidman (Chalmers University of Technology); Henrik Ström (Chalmers University of Technology); Srdjan Sasic (Chalmers University of Technology); Gaetano Sardina (Chalmers University of Technology) |
| #650: Bubble breakup characteristics in a Venturi tube under high gas flow ratio [Session S11; Room 501, Topics: Bubbly Flows] |
Noor Saffreena Binti Hamdan (University of Tsukuba); Akiko Kaneko (University of Tsukuba) |
| #664: Two-dimensional turbulent bubble raft statistics from a plunging liquid jet [Session S7; Room 501, Topics: Bubbly Flows] |
Robert K Keane (University of Massachusetts, Amherst); Aaron Fishbein (University of Massachusetts, Amherst); Utkarsh Jain (University of Massachusetts, Amherst); Varghese Mathai (University of Massachusetts, Amherst) |
| #687: Experiments and simulation on the performance of a large-scale airlift pump for air-water and air-slurry operation [Session S11; Room 501, Topics: Bubbly Flows] |
Kazuya Shimizu (The University of Tokyo); Shu Takagi (The University of Tokyo) |
| #791: Three-dimensional measurement of bubbly flow induced by a free-fall impinging jet [Session S8; Room 501, Topics: Bubbly Flows] |
Jinho Oh (Pusan National University); Michael Chukwuemeka Ekwonu (Pusan National University); Hyunduk Seo (Pusan National University); Kyung Chun Kim (Pusan National University) |
| #813: Passage of bubble across a liquid-liquid interface in the presence of regular waves [Session S11; Room 501, Topics: Bubbly Flows] |
Rupak Kumar (IIT Roorkee); Arup Kumar Das (IIT Roorkee) |
| #816: Bubble-induced turbulence and reattachment length in an upward bubbly pipe flow with sudden expansion [Session S7; Room 501, Topics: Bubbly Flows] |
Yewon Kim (Seoul National University); Hyungmin Park (Seoul National University) |
| #865: CFD-based discrete particle modelling of mono- & poly-dispersed gas bubbles in a solid catalyzed dilute slurry flow bubble column [Session S12; Room 501, Topics: Bubbly Flows] |
Parul Tyagi (Indian Institute of Technology Roorkee); Shubhali Singh (IIT Roorkee, India ); Vimal Kumar (IIT Roorkee, India) |
| #873: Bubbly flows in a column with submerged hollow fiber membranes [Session S9; Room 501, Topics: Bubbly Flows] |
Ryo Kurimoto (Kobe University); Shin Takaya (Kobe University); Kosuke Hayashi (Kobe University); Akio Tomiyama (Kobe University) |
| #874: Development of a correlation for the terminal rising velocity for 2D-bubbles in unconfined domain [Poster Session; Reception Hall] |
Timo A. Merbach (Hamburg University of Technology), Benas Mockus (University of Edinburgh), Kazuma Minamitani (Kobe University), Felix Kexel(Hamburg University of Technology) , Michael Schluter (Hamburg University of Technology), Prashant Valluri (University of Edinburgh), Kosuke Hayashi (Kobe University), Akio Tomiyama (Kobe University) |
| #880: Terminal velocity and mass transfer of 2D bubbles in a confined hele-shaw cell [Poster Session; Reception Hall] |
Benas Mockus (University of Edinburgh); Timo A. Merbach (Hamburg University of Technology); Prashant Valluri (University of Edinburgh); Michael Schlüter (Hamburg University of Technology); Ryo Kurimoto (Kobe University); Kosuke Hayashi (Kobe University); Akio Tomiyama (Kobe University) |
| #45: On bubble cloud growth in shock-droplet interaction [Session S5; Room 406, Topics: Cavitation/Nucleation] |
Kevin Schmidmayer (Inria); Luc Biasiori-Poulanges (ETH Zurich) |
| #76: Dynamical threshold of cavitation due to weak tension induced by water flows [Session S1; Room 406, Topics: Cavitation/Nucleation] |
Shigeo Fujikawa (Institute of Physical Fluid Dynamics); Toshihide Fujikawa (Institute of Physical Fluid Dynamics); Ryu Egashira (Institute of Physical Fluid Dynamics); Kamel Hooman (Institute of Physical Fluid Dynamics) |
| #136: Effect of liquid density on relation between developing time and size of laser induced bubble [Session S1; Room 406, Topics: Cavitation/Nucleation] |
Hitoshi Soyama (Tohoku University); Chieko Kuji (Tohoku University); Hiroyuki Kogawa (Japan Atomic Energy Agency); Masatoshi Futakawa (Japan Atomic Energy Agency) |
| #166: Influence of tissue stiffness on cavitation cloud formation by high intensity focused ultrasound in agarose gels [Session S3; Room 406, Topics: Cavitation/Nucleation] |
Koshi Kishimoto (Osaka Metropolitan University); Toshiyuki Ogasawara (Osaka Metropolitan University); Hiroyuki Takahira (Osaka Metropolitan University) |
| #170: Multiscale simulation of bubble cloud formation by high-intensity focused ultrasound using the ghost fluid method coupled with bubble dynamics [Session S5; Room 406, Topics: Cavitation/Nucleation] |
Mebuki Nakao (Osaka Prefecture University ); Hideki Yamauchi (Osaka Prefecture University ); Toshiyuki Ogasawara (Osaka Metropolitan University); Hiroyuki Takahira (Osaka Metropolitan University) |
| #171: The scaling law in bubble size distribution at early stage of cloud cavitation [Session S5; Room 406, Topics: Cavitation/Nucleation] |
Yunqiao Liu (Shanghai Jiao Tong University); Hao Zhang (Shanghai Jiao Tong University); Wei Zhang (Shanghai Jiao Tong University); Benlong Wang (Shanghai Jiao Tong University) |
| #213: Energy barrier of homogeneous bubble nucleation in liquid hydrogen as a quantum fluid and its scaling relation to a classical fluid [Session S1; Room 406, Topics: Cavitation/Nucleation] |
Shin-ichi Tsuda (Department of Mechanical Engineering, Kyushu University); Ryuji Takahashi (Kyushu University); Hiroki Nagashima (University of the Ryukyus); Takashi Tokumasu (Tohoku University); Satoshi Watanabe (Kyushu University) |
| #228: A Fokker-Planck-Boltzmann kinetic model of nucleation in cavitating and boiling flows [Poster Session; Reception Hall] |
Kasper Petersen (University of British Columbia); Joshua R Brinkerhoff (University of British Columbia) |
| #252: Growth and collapse of a bubble near a viscoelastic solid: effects of viscoelasticity [Session S1; Room 406, Topics: Cavitation/Nucleation] |
Jihoo Moon (KAIST); Ehsan Mahravan (KAIST); Daegyoum Kim (KAIST) |
| #310: Investigation of 2-D and 3-D ventilated supercavities using high-speed X-ray systems [Session S1; Room 406, Topics: Cavitation/Nucleation] |
Nicholas A Lucido (University of Michigan); Harish Ganesh (University of Michigan); Steve Ceccio (Univ Of Michigan) |
| #313: Cavitation inception and its noise emissions during the interaction of a pair of line vortices [Session S2; Room 406, Topics: Cavitation/Nucleation] |
Daniel Knister (University of Michigan); Harish Ganesh (University of Michigan); Steve Ceccio (Univ Of Michigan) |
| #317: Cavitation inside droplets induced by shocks [Session S5; Room 406, Topics: Cavitation/Nucleation] |
Jose Rodolfo Chreim (California Institute of Technology); Mauro Rodriguez (Brown University); Tim Colonius (Caltech) |
| #342: Evaluation of burn area based on CEM43 using temperature distribution around medical pulsed laser induced bubble [Poster Session; Reception Hall] |
Yasuhiro Sugimoto (Kanazawa Institute of Technology); Ikkei Araga (Kanazawa Institute of Technology); Takashi Fukue (Kanazawa Institute of Technology) |
| #393: Simultaneous high-speed observation in two-directions and measurement of impulsive pressure distribution for bubble collapse near a wall [Session S2; Room 406, Topics: Cavitation/Nucleation] |
Kazuma Matsumoto (Osaka Metropolitan University); Hayato Kida (Osaka Metropolitan University); Toshiyuki Ogasawara (Osaka Metropolitan University); Hiroyuki Takahira (Osaka Metropolitan University) |
| #400: Large-eddy simulation of cavitating flow using both homogeneous fluid model and interface tracking model [Session S6; Room 406, Topics: Cavitation/Nucleation] |
Shungo Okamura (Osaka University); Kie Okabayashi (Osaka University) |
| #401: Laser-induced bubble collapse behavior near adjacent rigid and soft walls [Poster Session; Reception Hall] |
Ritsuki Kamei (Kanazawa Institute of Technology); Yasuhiro Sugimoto (Kanazawa Institute of Technology) |
| #515: Numerical simulations of inertial cavitation at a compliant object interface [Session S5; Room 406, Topics: Cavitation/Nucleation] |
Mauro Rodriguez (Brown University); Jin Yang (University of Texas at Austin); Jonathan Estrada (University of Michigan) |
| #595: Numerical study on the collapse of a bubble cloud attached to a solid wall [Session S4; Room 406, Topics: Cavitation/Nucleation] |
Kohei Okita (Nihon University); Yuusuke Miyamoto (KOMATSU); Teruyuki Furukawa (KOMATSU); Shu Takagi (The University of Tokyo) |
| #598: Evaluation of thermal effects in cavitating flow by heating of nozzle wall [Session S2; Room 406, Topics: Cavitation/Nucleation] |
Junnosuke Okajima (Tohoku University); Kota Sato (Tohoku University) |
| #600: Study on damage evaluation using cavitation-bubble collapsing time [Session S3; Room 406, Topics: Cavitation/Nucleation] |
Hiroyuki Kawashima (Ibaraki University); Hiroyuki Kogawa (Japan Atomic Energy Agency); Masatoshi Futakawa (Japan Atomic Energy Agency); Nobuatsu Tanaka (Ibaraki University); Chieko Kuji (Tohoku University); Hitoshi Soyama (Tohoku University) |
| #609: Transition of cavitation regime on heated NACA0015 hydrofoil [Session S3; Room 406, Topics: Cavitation/Nucleation] |
Ning Yang (Tohoku University); Junnosuke Okajima (Tohoku University); Yuka Iga (Tohoku University) |
| #630: Wall-bounded cavitation bubble dynamics using a sharp-interface level-set method [Session S4; Room 406, Topics: Cavitation/Nucleation] |
Alexander Bußmann (Technical University of Munich); Stefan Adami (Technical University of Munich); Nikolaus Adams (Technical University of Munich) |
| #639: Numerical simulation of the Rayleigh collapse of two bubbles near a solid wall [Session S4; Room 406, Topics: Cavitation/Nucleation] |
Baudouin Fonkwa Kamga (University of Michigan Ann Arbor); Eric Johnsen (University of Michigan Ann Arbor) |
| #645: Dependence of thin film thickness and bubble shape on the gap width between two flat plate: an experimental and numerical study [Session S3; Room 406, Topics: Cavitation/Nucleation] |
Sachin Kumar (Indian Institute of Technology Hyderabad); Aleesha Kalam (Indian Institute of Technology Hyderabad); Harish N Dixit (IIT Hyderabad); Badarinath Karri (Indian Institute of Technology Hyderabad) |
| #682: Direct numerical simulation of two-phase compressible flows with phase change [Session S4; Room 406, Topics: Cavitation/Nucleation] |
Marie Bibal (Institut de Mécanique des Fluides de Toulouse); Maxence Deferrez (Isae Supaero); Annafederica Urbano (Isae Supaero); Sebastien Tanguy (Institut de Mécanique des Fluides de Toulouse) |
| #744: Characteristics of the microjets during shock-induced tandem bubble collapse [Session S6; Room 406, Topics: Cavitation/Nucleation] |
Wangxia Wu (Beijing Institute of Technology); Bing Wang (Tsinghua University); Qingquan Liu (Beijing Institute of Technology) |
| #774: Numerically understanding of chemical kinetics behavior on cavitating orifice flow [Session S6; Room 406, Topics: Cavitation/Nucleation] |
Jahidul Haque Chaudhuri (Indian Institute of Technology Madras); Dhiman Chatterjee (Indian Institute of Technology Madras) |
| #789: Influence of longitudinal grooves on Venturi cavitating flows [Session S2; Room 406, Topics: Cavitation/Nucleation] |
Xu Meng (Tsinghua University); Zhigang Zuo (Tsinghua University); Shuhong Liu (Tsinghua University) |
| #815: Observation of cavitation on axisymmetric body with hemispherical nose [Poster Session; Reception Hall] |
Rahul Ravindran (INDIAN INSTITUTE OF TECHNOLOGY); Dhiman Chatterjee (Indian Institute of Technology, Madras); Shamit Bakshi (Indian Institute of Technology, Madras) |
| #145: Direct-numerical simulation of droplet breakup in homogeneous isotropic turbulence [Session S2; Room 405, Topics: Collision, Agglomeration and Breakup] |
Palas Kumar Farsoiya (Princeton University); Luc Deike (Princeton University); Rodney O. Fox (Iowa State University) |
| #293: Analysis of particle impact deformation by material point method [Session S1; Room 405, Topics: Collision, Agglomeration and Breakup] |
Saba Saifoori (University of Leeds); Saeid Nezamabadi (University of Montpellier); Mojtaba Ghadiri (University of Leeds) |
| #332: Influence of the oxygen concentration on the breakup of liquid metal droplets [Session S3; Room 405, Topics: Collision, Agglomeration and Breakup] |
Leopold J Winter (Technical University of Munich); Thomas Hopfes (Technical University of Munich); Marcus Giglmaier (Technical University of Munich); Nikolaus Adams (Technical University of Munich) |
| #336: Rate kinetics of agglomeration and deagglomeration of nanoparticles using DEM [Session S4; Room 405, Topics: Collision, Agglomeration and Breakup] |
Alok Tiwari (IIT Bombay); Manaswita Bose (IIT Bombay) |
| #399: Influence of viscosity and surface wettability on drop-wall impact [Session S2; Room 405, Topics: Collision, Agglomeration and Breakup] |
Ghoku Krishnan (University of Virginia); Kevin Fletcher (University of Virginia); Trevor Marchhart (University of Virginia); Eric Loth (University of Virginia) |
| #441: Interaction of a bubble with a vortex-ring in the presence of surfactants [Session S1; Room 405, Topics: Collision, Agglomeration and Breakup] |
Maria Zednikova (Institute of Chemical Process Fundamentals of the CAS); Tereza Semlerová (Institute of Chemical Process Fundamentals of the CAS); Jaroslav Tihon (Institute of Chemical Process Fundamentals of the CAS); Tereza Travnickova (Institute of Chemical Process Fundamentals of the CAS); Jaromir Havlica (Institute of Chemical Process Fundamentals of the CAS); Sandra Orvalho (Institute of Chemical Process Fundamentals of the CAS) |
| #543: Obstruction of spreading droplets on a flat surface by non-deformable objects [Session S2; Room 405, Topics: Collision, Agglomeration and Breakup] |
Marcus Horwich (Imperial College London); Yannis Hardalupas (Imperial College London) |
| #623: Mass log-stable distribution of fragments in liquid-liquid fragmentation with solidification [Session S3; Room 405, Topics: Collision, Agglomeration and Breakup] |
Nicolas D. Rimbert (Université de Lorraine); Miloud Hadj Achour (LEMTA Université de Lorraine); Gagan Kewalramani (LEMTA Université de Lorraine); Bowen Ji (LEMTA Université de Lorraine); Alexandre Labergue (LEMTA Université de Lorraine); Michel Gradeck (LEMTA Univeristé de lorraine); Renaud Meignen (IRSN) |
| #670: Impact efficiency of fine particles interacting with a collector under different flow conditions [Session S1; Room 405, Topics: Collision, Agglomeration and Breakup] |
Martin Sommerfeld (Otto-von-Guericke University Magdeburg); Manuel A. Taborda (Otto-von-Guericke University Magdeburg) |
| #770: CFD-DEM model of cohesive particle collision [Session S4; Room 405, Topics: Collision, Agglomeration and Breakup] |
Nazerke Saparbayeva (Western Norway University of Applied Sciences); Pavel Struchalin (Western Norway University of Applied Sciences); Boris V Balakin (Western Norway University of Applied Sciences) |
| #772: Early and late splashes during drop impact onto a quiescent liquid film [Session S4; Room 405, Topics: Collision, Agglomeration and Breakup] |
Tomio Okawa (The University of Electro-Communications); Katsuyuki Kawa (The University of Electro-Communications); Kohei Kubo (The University of Electro-Communications) |
| #794: Large eddy simulations of primary breakup in metal melt gas atomization [Session S3; Room 405, Topics: Collision, Agglomeration and Breakup] |
Dennis P.L. Thuy (Eindhoven University of Technology); Joris Remmers (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology); Giulia Finotello (Eindhoven University of Technology) |
| #801: Collision of ice particles with an ice surface studied by positron emission particle tracking (PEPT) [Session S1; Room 405, Topics: Collision, Agglomeration and Breakup] |
Yu-Fen Chang (Western Norway University of Applied Sciences); Pavel Struchalin (Western Norway University of Applied Sciences); Boris V Balakin (Western Norway University of Applied Sciences) |
| #811: Fragmentation of water droplets dispersed in butter under mechanical agitation [Session S2; Room 405, Topics: Collision, Agglomeration and Breakup] |
Antoine Violas (Laboratoire de Génie Chimique); Kevin Roger (Laboratoire de Génie Chimique); Paul Duru (Institut de Mécanique des Fluides de Toulouse); Olivier Masbernat (Laboratoire de Génie Chimique) |
| #843: Multivariate population balance modeling of inclusion behavior in liquid metal processes [Session S3; Room 405, Topics: Collision, Agglomeration and Breakup] |
Ashok Das (Institut Jean Lamour, Université de Lorraine); Jean-Sebastien Kroll-Rabotin (Institut Jean Lamour, Université de Lorraine); Thibault Quatravaux (Institut Jean Lamour, Université de Lorraine); JP Bellot (Institut Jean Lamour, Université de Lorraine) |
| #83: Direct numerical simulations of Quincke rollers with fully resolved hydrodynamics [Session S9; Room 404, Topics: Colloidal and Suspension Dynamics] |
Shun Imamura (Kyoto UNiversity); Takuya Kobayashi (Kyoto UNiversity); John J. Molina (Kyoto UNiversity); Ryoichi Yamamoto (Kyoto UNiversity) |
| #219: Can ion adsorption stabilize bulk nanobubbles [Session S9; Room 404, Topics: Colloidal and Suspension Dynamics] |
Mingbo Li (Tsinghua University); Xiaotong Ma (Tsinghua University); Chao Sun (Tsinghua University) |
| #271: Simulation of collision events in flotation under the influence of gravity [Session S9; Room 404, Topics: Colloidal and Suspension Dynamics] |
Benedikt Tiedemann (TU Dresden); Jochen Fröhlich (TU Dresden) |
| #307: Effect of ultrasound on the viscosity of cementitious materials [Poster Session; Reception Hall] |
Jihwan Seo (Seoul National University); Ho-Young Kim (Seoul National University); Wonjung Kim (Sogang University) |
| #325: Complex viscosity of dilute bubble suspensions in unsteady shear flows [Session S9; Room 404, Topics: Colloidal and Suspension Dynamics] |
Kohei Ohie (Hokkaido University); Yuji Tasaka (Hokkaido University); Yuichi Murai (Hokkaido University) |
| #758: Formation of acoustic streaming in standing wave sound field by ultrasonic vibration [Poster Session; Reception Hall] |
Kenji Kofu (Nihon University); Kazuki Koinuma (Nihon University); Hirofumi Nonaka (Nihon University) |
| #20: Multiscale modelling of contact line dynamics using combined finite volume - molecular dynamics simulation [Session S7; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Avik Saha (IIT Roorkee); Arup Kumar Das (IIT Roorkee) |
| #30: Automatic mesh refinement with the N-Euler multiphase solver neptune_cfd to identify software and hardware limitations for industrial fluidized bed simulations at Exascale [Session S9; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Herve Neau (IMFT / CNRS); Maxime Pigou (IMFT / CNRS); Nicolas Renon (UMS CALMIP); Cyril Baudry (EDF); yvan Fournier (EDF); Nicolas Merigoux (EDF); Renaud Ansart (LGC, Toulouse INP); Olivier Simonin (IMFT, Toulouse INP) |
| #39: Improvement of simple CLSVOF method in the full Eulerian framework [Poster Session; Reception Hall] |
Naoki Shimada (Sumitomo Chemical Co. Ltd.); Yusuke Uchihashi (Sumitomo Chemical Co. Ltd.); Yuta Yaegashi (Sumitomo Chemical Co. Ltd.); Miya Matsuo (Sumitomo Chemical Co. Ltd.); Mitsuhiro Ohta (Graduate School of Technology, Industrial and Social Sciences, Tokushima University); Akio Tomiyama (Graduate School of Engineering, Kobe University) |
| #40: Simulation of bubble collapse near a curved wall using a penalization method [Session S7; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Lucas Ménez (Pprime-ENSMA); Philippe Parnaudeau (Pprime-ENSMA); Marianne Beringhier (Pprime-ENSMA); Eric Goncalves (ISAE-ENSMA) |
| #46: Numerical simulation of viscoelastic and Newtonian fluid jets in the initial phase of electrospinning [Session S3; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Julian K Liedtke (Institut für Mechanische Verfahrenstechnik, Universität Stuttgart); Carsten Mehring (Institut für Mechanische Verfahrenstechnik, Universität Stuttgart) |
| #54: A numerical strategy based on a diffuse interface two-fluid model to simulate the melting of a solid swept by a hot gas flow [Session S8; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Lucas Tallois (CEA); Simon Peluchon (CEA); Philippe Villedieu (ONERA, DMPE) |
| #94: Eulerian computation of droplet preferential concentration in turbulence [Poster Session; Reception Hall] |
George Downing (Imperial College London); Yannis Hardalupas (Imperial College London) |
| #114: Numerical simulation of counter-current flow in a vertical pipe with rounded ends [Session S2; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Michio Murase (Institute of Nuclear Safety System, Inc.); Toshiya Takaki (Institute of Nuclear Safety System, Inc.); Yoichi Utanohara (Institute of Nuclear Safety System, Inc.) |
| #153: Interfacial mass transfer based on a geometric volume of fluid solver [Session S4; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Alexis Tourbier (IFPEN); Lionel Gamet (IFPEN); Typhene Michel (IFPEN); Philippe Beard (IFPEN); Joelle Aubin (Universite de Toulouse); Hrvoje Jasak (Wikki Ltd) |
| #167: Lattice Boltzmann method for multiphase flows with two-relaxation time collision operator [Session S8; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Takeshi Seta (University of Toyama); Keiichi Yamamoto (Nippon Pillar Packing) |
| #192: Slip boundary condition in the contact line region of laminar two-phase separated flow [Session S5; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Ayelet Goldstein (Braude-College of Engineering); Ofer Eyal (Braude-Academic College); Amos Ullmann (Tel-Aviv University); Neima Brauner (Tel-Aviv University) |
| #197: Exploring differences in second order statistics for the simulation of multi-scale atomization process [Session S3; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Alberto Remigi (SAFRANTECH); Petar Tomov (SAFRAN Aircraft Engines); Marc Massot (CMAP, Ecole Polytechnique); Ludovic Goudenege (Ecole Polythechnique); François-Xavier Demoulin (CORIA); Benjamin Duret (CORIA); Julien Reveillon (CORIA) |
| #206: A sharp front tracking method based on geometric interface reconstruction [Session S5; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Christian Gorges (University of Magdeburg); Fabien Evrard (Otto-von-Guericke University Magdeburg); Robert Chiodi (Los Alamos National Laboratory); Berend van Wachem (University of Magdeburg); Fabian Denner (University of Magdeburg) |
| #210: Comparison of diffuse and sharp interface methods for highly compressible flows within a unified framework [Session S6; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Nico Fleischmann (Technical University of Munich); Stefan Adami (Technical University of Munich); Nikolaus Adams (Technical University of Munich) |
| #220: A symmetric filamentary approach to the moment-of-fluid method [Session S4; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Philippe Hergibo (Cardiff University); Timothy Phillips (Cardiff University); Zhihua Xie (Cardiff University) |
| #236: State sensing of bubble jet flow based on acoustic recognition and deep learning [Session S3; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Nao Mikami (Osaka University); Yoshitaka Ueki (Osaka University); Masahiko Shibahara (Osaka University); Kosuke Aizawa (Japan Atomic Energy Agency); Kuniaki Ara (Japan Atomic Energy Agency) |
| #257: A novel front tracking – immersed boundary method (FT-IBM) for multiphase flows. [Session S5; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Maike Baltussen (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
| #286: A 3D wide-area simulation for real river flood disaster including driftwood with high resolution mesh [Session S2; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Dawei Shen (Tokyo Institude of Technology); Takayuki Aoki (Tokyo Institude of Technology); Seiya Watanabe (Kyushu University); Shuji Moriguchi (Tohoku University); Shinsuke Takase (Hachinohe Institute of Technology); Masaaki Sakuraba (Nippon Koei) |
| #315: A mass-conserving pressure-based method for compressible two-phase flows with phase change and wetting effects [Session S6; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Marica Pelanti (ENSTA Paris); Nicolo Scapin (KTH); Luca Brandt (KTH & NTNU); Wai Hong Ronald Chan (University of Colorado); Suhas Jain ( Stanford University); Shahab Mirjalili (Stanford University) |
| #318: Local behavior near corners: triple points in laminar two-phase flow and other examples [Session S5; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Ofer Eyal (Braude-Academic College); Ayelet Goldstein (Braude-College of Engineering) |
| #363: A lattice Boltzmann flux solver with log-conformation representation and its application to capsule deformation in viscoelastic flow [Session S8; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Hua Zhang (National University of Singapore, Southern University of Science and Technology); Chang Shu (National University of Singapore); Lian-Ping Wang (Southern University of Science and Technology) |
| #383: Simulating three-dimensional two-phase flows subject to surface tension with piecewise parabolic interface reconstruction [Session S4; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Fabien Evrard (Otto-von-Guericke University Magdeburg); Robert Chiodi (Los Alamos National Laboratory); Berend van Wachem (University of Magdeburg); Olivier Desjardins (Cornell University) |
| #388: Investigating the effects of spurious force oscillations on the motion of finite size particles modelled using the immersed boundary method [Session S9; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Mohammad Giahi (University of Saskatchewan); Donald Bergstrom (University of Saskatchewan) |
| #394: In silico study of the effect of surfactant on the oil spreading at the interface between water droplets and hydrophobic surfaces [Session S7; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Takeshi Kobayashi (University College London); Teng Dong (University College London); Kristo Kotsi (University College London); Alexander Moriarty (University College London); Ian McRobbie (Innospec Inc.); Alberto Striolo (University College London); Panagiota P Angeli (UCL) |
| #440: Fast simulation of multiphase compressible flows through GPU acceleration [Session S6; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Henry A Le Berre (Georgia Institute of Technology); Anand Radhakrishnan (Georgia Institute of Technology); Spencer H Bryngelson (Georgia Institute of Technology) |
| #450: Phase-field lattice-Boltzmann simulation of micro droplet motion on solid surface [Session S8; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Naoki Takada (National Institute of Advanced Industrial Science and Technology); Tomohiro Takaki (Kyoto Institute of Technology); Shintaro Aihara (Kyoto Institute of Technology); Katsuo Mogi (Tokyo Denki University); Satoshi Someya (National Institute of Advanced Industrial Science and Technology); Soumei Baba (National Institute of Advanced Industrial Science and Technology); Shimpei Saito (AIST) |
| #483: High-resolution simulation of turbulent Taylor bubble flow at low Reynolds number [Session S7; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Edo Frederix (NRG); Jun Fang (ANL); Elia Merzari (PSU); Ed Komen (NRG) |
| #493: Spreading of spilled low sulfur fuel oil (LSFO): a numerical study [Session S2; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Jaebeen Lee (Seoul National Univ); Linfeng Piao (Seoul National Univ); Hyungmin Park (Seoul National Univ) |
| #524: A Cartesian cut cell method for mixed robin or Navier slip boundary conditions [Session S7; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Alejandro Quirós Rodríguez (Sorbonne Université); Tomas Fullana (Sorbonne University); Vincent Le Chenadec (Gustave Eiffel University); Taraneh Sayadi (Sorbonne University) |
| #530: A hybrid IBM, LES, VoF and Lagrangian tracking for two-phase flows simulation. application to inline separation [Session S1; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Hanane Atmani (IMFT); Dominique Legendre (IMFT); Rémi Zamansky (IMFT); Eric CLIMENT (IMFT) |
| #541: A new method for the adaptative removal of stiffness in PDEs [Session S6; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Laurent Duchemin (PMMH / ESPCI); Jens Eggers (University of Bristol) |
| #547: Prediction of flow pattern transition in pipelines using Taylor-Hood finite elements [Session S1; Room 503, Topics: Computational Techniques for Multiphase Flows] |
David Lazo-Vásquez (Universidade de São Paulo); Jorge Luis Baliño (Universidade de São Paulo) |
| #580: Dugks-ibm simulation of particle-laden turbulent channel flow on a non-uniform orthogonal mesh [Poster Session; Reception Hall] |
Kairzhan Karzhaubayev (Southern University of Science and Technology); Lian-Ping Wang (Southern University of Science and Technology); Cheng Peng (Shandong University) |
| #616: Homogeneous and heterogeneous transport in porous media with microstructural reactive gradients [Session S8; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Dario Maggiolo (Chalmers University of Technology); Oskar Modin (Chalmers University of Technology); Angela Kalagasidis (Chalmers University of Technology) |
| #619: NURBS-based immersed boundary method for arbitrarily shaped particles [Session S9; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Lorenzo Vallisa (von Karman Institute for Fluid Dynamics); Maria Teresa Scelzo (von Karman Institute for Fluid Dynamics); Silvania Lopes (von Karman Institute for Fluid Dynamics); Michel De Paepe (Ghent University); Delphine Laboureur (von Karman Institute for Fluid Dynamics) |
| #628: Lagrangian-Eulerian modeling of fuel-coolant interaction in nuclear reactor severe accidents [Session S2; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Min-Soo Kim (Korea Maritime and Ocean University), Dong-Jin Shin (Korea Maritime and Ocean University), Dong-Ha Kim (Korea Maritime and Ocean University), Kwang-Hyun Bang (Korea Maritime and Ocean University) |
| #676: Assessing computational modelling of interface dispersion with hybrid multifluid CFD approaches [Session S6; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Daniele Vivaldi (IRSN); Marco Colombo (University of Sheffield) |
| #704: Implementation of the coupled level set and volume of fluid method in OpenFOAM: a comparison with existing VOF techniques [Session S1; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Songtao Chen (Shanghai Jiao Tong UNiversity); Weiwen Zhao (Shanghai Jiao Tong UNiversity); Decheng Wan (Shanghai Jiao Tong UNiversity) |
| #734: A coupling VOF/embedded boundary method to model contact angles on arbitrary solid surfaces [Session S4; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Mathilde B Tavares (LadHyX, Ecole polytechnique); Christophe Josserand (LadHyX, CNRS & E. Polytechnique); Alexandre Limare (Institut Jean Le Rond d'Alembert, Sorbonne Université); José Maria Lopez Herrera Sanchez (Universidad de Sevilla, Ingenieria Aerospacial y Mecanica de Fluidos); Stéphane Popinet (Institut Jean Le Rond d'Alembert, Sorbonne Université) |
| #796: Curvature filtering for a high-order and sharp interface multiphase flow solver [Poster Session; Reception Hall] |
Ward G Haegeman (CMAP); david henneaux (VKI); pierre schrooyen (Cenaero); Thierry Magin (VKI); Marc Massot (CMAP, Ecole Polytechnique) |
| #824: CFD study on erosion characteristics of a pipe bend under liquid-solid two phase flow [Session S1; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Gyanendra Tiwari (Indian Institute of Technology Madras); Dhiman Chattarjee (Indian Institute of Technology Madras) |
| #829: Subgrid-scale modeling of liquid drop bag breakup [Session S3; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Austin H Han (Cornell University); Olivier Desjardins (Cornell University) |
| #854: A new strategy for direct numerical simulations with fully resolved particles based on volume-filtering [Session S9; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Mohamed Houssem Kasbaoui (Arizona State University); Marcus Herrmann (Arizona State University) |
| #855: ACoolTPS – advanced cooling of high power microsystems using two-phase flows systems in complex geometries [Session S5; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Gustavo R. Anjos (Coppe/UFRJ); Prashant Valluri |
| #859: Simulation of polydisperse oscillating droplets through high order numerical methods for geometric moment equations [Session S8; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Katia Ait-Ameur (Ecole Polytechnique); Arthur Loison (CMAP, École polytechnique); Samuel Kokh (CEA); Teddy Pichard (CMAP, Ecole Polytechnique); Marc Massot (CMAP, Ecole Polytechnique) |
| #863: Numerical simulation of the impact of gas jet on a free water surface [Poster Session; Reception Hall] |
Ward G Haegeman (CMAP); Clement LeTouze (ONERA); Joel Dupays (ONERA); Marc Massot (CMAP, Ecole Polytechnique) |
| #870: Accuracy of state-of-the-art CFD solvers for the numerical simulation of cavitation, particle re-suspension/settling and oil-water separation processes, for oily-sludge treatment applications [Session S1; Room 503, Topics: Computational Techniques for Multiphase Flows] |
Manolia Andredaki (Liverpool John Moores University); Marco Picco (University of Brighton); Stephen Symes (Liverpool John Moores University); Eduardo Blanco Davis (Liverpool John Moores University); Jin Wang (Liverpool John Moores University); Ben Monkton (Envorem); Mike Levey (Envorem); Mark Batt-Raawden (Envorem); Anastasios Georgoulas (University of Brighton) |
| #49: Numerical study of 3D flow instabilities in spherical droplets [Session S5; Room 405, Topics: Droplet Flows] |
Godé Hadrien (CEA); Eric Climent (IMFT); Charton Sophie (CEA); Legendre Dominique (IMFT) |
| #74: Spreading dynamics during single droplet impact onto a free-standing cubic surface element [Session S6; Room 405, Topics: Droplet Flows] |
Anne K. Geppert (University of Stuttgart, Institute of Aerospace Thermodynamics); Bernhard Weigand (University of Stuttgart, Institute of Aerospace Thermodynamics) |
| #96: Global and Local statistics in turbulent emulsions [Session S8; Room 405, Topics: Droplet Flows] |
Chao Sun (Tsinghua University); Lei Yi (Tsinghua University); Federico Toschi (Eindhoven University of Technology) |
| #185: Pipe flow experiments with oil-water dispersions: effect of natural surfactant on flow behavior [Session S8; Room 405, Topics: Droplet Flows] |
Diana C Gonzalez (NTNU); Jørn Kjølaas (SINTEF); Heiner Schumann (SINTEF) |
| #215: Micro-droplet generation via marangoni bursting [Session S5; Room 405, Topics: Droplet Flows] |
Stefan Puttinger (Johannes Kepler University Linz); Mahdi Saeedipour (Johannes Kepler University) |
| #230: Experimental and numerical study of droplet behavior in channel flows with and without obstacles [Session S6; Room 405, Topics: Droplet Flows] |
Veronika Krämer (Robert Bosch GmbH); Martin Rohde (University Wuppertal); Sebastian Burgmann (University Wuppertal); Simon Rentschler (Robert Bosch GmbH); Christopher Holzknecht (Robert Bosch GmbH); Christoph Gmelin (Robert Bosch GmbH); Uwe Janoske (University Wuppertal) |
| #273: On the phenomenology of pairwise interactions in a buoyancy driven flow. [Session S8; Room 405, Topics: Droplet Flows] |
Nicolas N Fintzi (IFPEN); Jean-Lou Pierson (IFPEN); Stéphane Popinet (CNRS & Sorbonne Universite) |
| #361: A 3D numerical analysis for a effect of a magnetic field on breakup of a ferrofluid droplet in simple shear flow [Session S5; Room 405, Topics: Droplet Flows] |
Yuto Kawabata (Kobe University); Shunichi Ishida (Kobe University); Yohsuke Imai (Kobe University) |
| #397: Simulation of droplet-laden turbulent channel flow by a kinetic approach [Poster Session; Reception Hall] |
Jun Lai (Southern University of Science and Technology); Xiusong Chen (Southern University of Science and Technology); Chunhua Zhang (Southern University of Science and Technology); Lian-Ping Wang (Southern University of Science and Technology); Zuoli Xiao (Peking University) |
| #408: Viscous flow through a pressure-swirl nozzle [Session S7; Room 405, Topics: Droplet Flows] |
Vivekanand V Swami (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology) |
| #437: Understanding the dynamics of underliquid drop spreading [Session S6; Room 405, Topics: Droplet Flows] |
Debarshi Debnath (Indian Institute of Technology Mandi); Sirshendu Misra (University of Waterloo); Parmod Kumar (IIT Mandi); Sushanta Mitra (University of Waterloo); |
| #458: The effect of aerodynamic interactions on the coalescence of cloud droplets [Session S8; Room 405, Topics: Droplet Flows] |
Antoine Michel (Institute of Meteorology and Water Management); Ahmad Ababaei (Institute of Meteorology and Water Management ‒ National Research Institute); Bogdan Rosa (Institute of Meteorology and Water Management ‒ National Research Institute) |
| #523: Volumetric reconstruction of drop impact dynamics by means of color-coded glare points and deep learning [Session S6; Room 405, Topics: Droplet Flows] |
Maximilian Dreisbach (Karlsruhe Institute of Technology); Sebastian Blessing (Institute of Fluid Mechanics (ISTM) - Karlsruhe Institute of Technology (KIT)); Alexander Stroh (Institute of Fluid Mechanics, Karlsruhe Institute of Technology); Jochen Kriegseis (Institute of Fluid Mechanics, Karlsruhe Institute of Technology) |
| #525: Contact line catch up by growing ice crystals [Session S6; Room 405, Topics: Droplet Flows] |
Christophe Josserand (LadHyX, CNRS & E. Polytechnique); Rodolphe Grivet (LadhyX-Ecole polytechnique); Axel Huerre (MSC-CNRS); Antoine Monier (InPhyNi-CNRS); Thomas Séon (Institut ∂'Alembert, CNRS) |
| #540: Long-time dynamics of water-in-oil emulsions in an annular planar Couette flow [Session S8; Room 405, Topics: Droplet Flows] |
Rémi Macadré (LGC-IMFT); Olivier Masbernat (Laboratoire du Génie Chimique (LGC)); Frédéric Risso (CNRS-IMFT); Roel Belt (TotalEnergies) |
| #553: Gas-liquid coaxial atomization in a high-pressure environment [Session S7; Room 405, Topics: Droplet Flows] |
Kee Onn Fong (University of Washington); Xinzhi Xue (University of Washington); Rodrigo Osuna-Orozco (University of Washington); Alberto Aliseda (University of Washington) |
| #587: Influence of liquid properties on atomization and spray characteristics of a slinger atomizer [Session S7; Room 405, Topics: Droplet Flows] |
Arshdeep Singh (Indian Institute of technology, Madras); Srikrishna Sahu (Indian Institute of technology,Madras); Dalton Maurya (GTRE,India) |
| #615: Droplet spatial distribution in a spray [Session S7; Room 405, Topics: Droplet Flows] |
Olivier Rouzaud (Onera); Lola Rousseau (ONERA); Mikaël Orain (ONERA); Pierre Doublet (ONERA); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)) |
| #656: Rheology of ferrofluid droplet suspension in wall-bounded shear flow [Session S5; Room 405, Topics: Droplet Flows] |
Shunichi Ishida (Kobe University); Daiki Matsunaga (Osaka University) |
| #699: Hydrodynamics of liquid-liquid slug flow in circular channels: the effects of fluid properties and channel geometries [Poster Session; Reception Hall] |
Satoko Fujioka (Keio University); Arisa Hirata (Keio University); Tomoya Tetsuka (Keio University); Koichi Terasaka (Keio University) |
| #707: Conditional measurement of droplet size within droplet clusters in polydisperse sprays [Session S5; Room 405, Topics: Droplet Flows] |
Nandhakumar Pandurangan (Indian Institute of Technology); Srikrishna Sahu (Indian Institute of Technology) |
| #761: A computational fluid dynamics - population balance approach for virus-laden droplets transport under different ventilation conditions [Session S7; Room 405, Topics: Droplet Flows] |
Yi Feng (Politecnico di Torino); Dongyue Li (DYFLUID Ltd); Daniele Marchisio (Politecnico di Torino); Marco Vanni (Politecnico di Torino); Antonio Buffo (Politecnico di Torino) |
| #292: Dual displacement fronts of fluid displacement in porous media: numerical simulations on double viscous fingerings [Session S12; Room 406, Topics: Environmental and Geophysical Flows] |
Anindityo Patmonoaji (Tokyo University of Agriculture and Technology); Yuichiro Nagatsu (Tokyo University of Agriculture and Technology) |
| #492: Deliquescence of sub-micron sized NaCl-particles – comparing measurements and simulations [Session S12; Room 406, Topics: Environmental and Geophysical Flows] |
Silvio Schmalfuß (Leibniz Institute for Tropospheric Research (TROPOS)); Dennis Niedermeier (Leibniz Institute for Tropospheric Research (TROPOS)); Rasmus Hoffmann (Leibniz Institute for Tropospheric Research (TROPOS)); Frank Stratmann (Leibniz Institute for Tropospheric Research (TROPOS)) |
| #539: On airborne transmission from cooling towers [Session S12; Room 406, Topics: Environmental and Geophysical Flows] |
Xavier Lefebvre (École Polytechnique Montréal); Elliston Vallarino Reyes (McGill University); Emilie Bedard (École Polytechnique Montréal); Michele Prevost (Ecole Polytechnique de Montreal); Etienne Robert (École Polytechnique Montréal) |
| #48: Shake-the-Box technique to investigate an elongated air bubble flowing in stagnant liquid , in a slightly inclined pipe [Session S2; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Alexandre Boucher (University of Toulouse); Lucas Pavlov (University of Toulouse); Sébastien Cazin (UNiversity of Toulouse); Roel Belt (TotalEnergies); Alain A Liné (University of Toulouse) |
| #82: Coalescence investigations in small scale continuously operated setup [Session S6; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Mark W. Hlawitschka (Johannes-Kepler-University Linz); D. Danner (Johannes-Kepler-University Linz) |
| #125: STORMFLOW: a STOchastic geometRical model for Multiphase FLOW characterization [Session S6; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Léo Théodon ("Ecole Nationale Supérieure des Mines, Saint-Etienne, FRANCE"); Kassem Dia (CEA); Johan Debayle ("Ecole Nationale Supérieure des Mines, Saint-Etienne, FRANCE"); Fabrice Lamadie (CEA) |
| #127: Investigation of gas-liquid phase and liquid film thickness irradiated two-fluids jet surface using an optical fiber probe [Session S1; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Shinsuke Watanabe (Shizuoka University); Kensho Yamakawa (Shizuoka University); Yuki Mizushima (Shizuoka University); Hiroki Takahashi (Ebara Corporation); Satomi Hamada (Ebara Corporation); Masayoshi Imai (Ebara Corporation); Toshiyuki Sanada (Shizuoka University) |
| #146: Measurement of interfacial velocity along the surface of a liquid jet in gas crossflow during primary breakup [Session S9; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Tianyi Wang (Imperial College London); Yannis Hardalupas (Imperial College London) |
| #159: The use of optically active particles in flow visualization [Session S5; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Vladislav Rinsky (Technion - Israel Institute of Technology); Subhani Shaik (Technion - Israel Institute of Technology); Rene van Hout (Technion - Israel Institute of Technology) |
| #163: Particle detection in the slurry by using the optical visualization method [Session S5; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Guangxin Ding (Gyeongsang National University); Han Van Nguyen (Gyeongsang National University); Yubo Jin (Gyeongsang National University); Hyoung-Bum Kim (Gyeongsang National University) |
| #198: Volumetric fraction, pressure gradients and flow patterns in inclined dense-gas/liquid pipe flow [Session S6; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Carlos Mauricio Ruiz-Diaz (University of São Paulo ); Cristhian E Alvarez-Pacheco (University of São Paulo, Industrial Multiphase Flow Laboratory (LEMI)); Oscar Rodriguez (University of São Paulo) |
| #218: 3D-PTV measurements of vortex-flow reversal in sessile drops due to shear flow [Session S4; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Sebastian Burgmann (University Wuppertal); Clemens Bilsing (TU Dresden); Martin Rohde (University Wuppertal); Lars Büttner (TU Dresden); Jürgen Czarske (TU Dresden); Uwe Janoske (University Wuppertal) |
| #238: Identification method for the thin area of wavy liquid-film with optical waveguide sensors [Session S1; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Kosuke Nakano (Shizuoka University); Yujiro Teramoto (Shizuoka University); Hajime Furuichi (Shizuoka University); Toshiyuki Sanada (Shizuoka University); Yuki Mizushima (Shizuoka University) |
| #255: Visualization of two-phase flow in particulate bed by refractive index matching method using CYTOP [Session S3; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Shota Ueda (CRIEPI); Takahiro Arai (CRIEPI); Masahiro Furuya (CRIEPI); Riichiro Okawa (CRIEPI) |
| #259: Chemical destabilization of emulsions in a direct contact heat storage column [Session S8; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Halvard Thon (SINTEF AS); Galina Simonsen (SINTEF AS); Paul Roger Leinan (SINTEF AS) |
| #262: Consideration of accuracy improvement for the film-thickness-measurements via an optical-fiber-based reflective probe during [Session S1; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Daiki Iioka (Shizuoka University); Toshiyuki Sanada (Shizuoka University); Yuki Mizushima (Shizuoka University) |
| #279: Experimental study of liquid/dense-gas flow patterns, pressure gradient, and holdup [Session S6; Room 403, Topics: Experimental Methods for Multiphase Flows] |
André M Quintino (University of São Paulo); Oscar Rodriguez (University of São Paulo) |
| #284: Investigation of the atomization mechanism in internal-mixing Y-jet nozzles using steam as the dispersing medium [Session S9; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Matheus Rover Barbieri (Universität Bremen); Lydia Achelis (Universität Bremen); Udo Fritsching (University Bremen) |
| #288: Turbulent kinetic energy in stirred tanks estimated with an alternative approach: Tilted PIV [Session S5; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Aline G De Mitri (Process Engineering Department, School of Chemical Engineering, University of Campinas); Rodrigo de L. Amaral (Department of Mechanical Engineering, Polytechnic School, University of São Paulo); Helder L. de Moura (Center for Petroleum Studies, University of Campinas); Guilherme Castilho (Universidade Estadual de Campinas) |
| #321: Interferometric particle imaging for bubble-size estimations in thin annular gap-flows [Session S5; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Christian Alexander Sax (Karlsruhe Institut of Technology); Robin Leister (Karlsruhe Institut of Technology); Andreas Bruemmer (Technical University Dortmund ); Jochen Kriegseis (Karlsruhe Institut of Technology) |
| #348: Can optical flow method be used to obtain velocities of liquid droplets in a multiphase flow? [Session S4; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Avick Sinha (UNIVERSITY OF NOTTINGHAM); Benjamin Pamplin (UNIVERSITY OF NOTTINGHAM); Kathy Johnson (UNIVERSITY OF NOTTINGHAM); David Hann (UNIVERSITY OF NOTTINGHAM) |
| #352: Analysis of the influence of the continuous on the dispersed phase in a two-phase liquid-liquid dispersion in rotating conditions using piv and hsi [Session S4; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Rodolfo M. Perissinotto (University of Campinas); Rafael Franklin Lazaro de Cerqueira (UNICAMP/CEPETRO/ALFA); William Denner Pires Fonseca (UNICAMP); William Monte Verde (Center for Petroleum Studies); Jorge Biazussi (University of Campinas); Erick Franklin (University of Campinas); Antonio Bannwart (University of Campinas ); Marcelo S Castro (UNICAMP) |
| #362: Visualization of continuously rising bubbles in gallium alloy [Session S3; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Sana Maeda (Kobe University); Yudai Kubo (Kobe University); Hideki Murakawa (Kobe University); Katsumi Sugimoto (Kobe University) |
| #365: Experimental investigation of the relative viscosity for different emulsion systems in a pipeline flow [Session S8; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Natan A. V. Bulgarelli (Center for Energy and Petroleum Studies - University of Campinas); William Monte Verde (Center for Petroleum Studies); Jorge Luiz Biazussi (University of Campinas); Marcelo S Castro (UNICAMP) |
| #371: Synchrotron X-ray phase contrast imaging of ultrasonic cavitation phenomena [Session S3; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Luc Biasiori-Poulanges (ETH Zurich); Claire Bourquard (Silicon Austria Labs GmbH); Bratislav Lukic (European Synchrotron Radiation Facility); Ludovic Broche (European Synchrotron Radiation Facility); Outi Supponen (ETH Zurich) |
| #409: Measurment of the anisotropic drainage in liquid foam using neutron radiography [Session S3; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Artem Skrypnik (Technische Universität Dresden); Pavel Trtik (Paul Scherrer Institute); Katie Cole (Imperial College London); Tobias Lappan (Helmholtz-Zentrum Dresden-Rossendorf); Pablo R. Brito-Parada (Imperial College London); Stephen J. Neethling (Imperial College London); Kerstin Eckert (Technische Universität Dresden, Helmholtz-Zentrum Dresden-Rossendorf); Sascha Heitkam (Technische Universität Dresden) |
| #473: Development of a stress field visualization method for dynamic fluids on channel walls. [Poster Session; Reception Hall] |
Shoto Sekiguchi (Tokyo University of Agriculture and Technology); Kazuya U. Kobayashi (Nippon Institute of Technology); Kei Morikawa (St. Marianna University School of Medicine); Yoshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
| #501: Eddy current based detection of inclusions in liquid metal flow [Session S7; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Antoine Afflard (CEA Cadarache); R. Zamansky (IMFT); W. Bergez (IMFT); P. Tordjeman (IMFT); K. Paumel (CEA) |
| #545: Experiments on air-water slug flow in a horizontal pipe using high speed imaging [Session S2; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Belma B Hadzovic (NTNU); Eirik Æsøy (NTNU); Paul R. Leinan (SINTEF); James R. Dawson (NTNU) |
| #557: Non-contact measurement of ultrasound pressure field using background-oriented Schlieren technique [Session S7; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Sayaka Ichihara (Tokyo University of Agriculture and Technology); Yuta Kurashina (Tokyo University of Agriculture and Technology); Yoshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
| #659: Two-phase flow metering of maldistribution inside a header by mean of Venturi flowmeter solely [Session S7; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Aude Lecardonnel (Von karman Institute); C. Tempesti (Von karman Institute); C. de Servi (Delft University of Technology); P. Colonna (Delft University of Technology); D. Laboureur (Von karman Institute) |
| #674: Spray characterization using shadowgraphy for spray nozzles [Session S9; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Avadhesh Kumar Sharma (The University of Tokyo); Erdal Ozdemir (The University of Tokyo); Ruicong Xu (The University of Tokyo); Shuichiro Miwa (The University of Tokyo); Shunichi Suzuki (The University of Tokyo); Marco Pellegrini (The University of Tokyo) |
| #675: Experimental analysis of three-phase gas-liquid-solid intermittent flows in vertical pipelines [Session S2; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Ronaldo L Höhn (Universitat Rovira i Virgili); Sylvana Varela Ballesta (Universitat Rovira i Virgili); Youssef Stiriba (Universitat Rovira i Virgili) |
| #696: Investigation of particle laden gravity currents using the light attenuation technique [Session S8; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Yvan Dossmann (Université de Lorraine); Jean Schneider (Université de Lorraine); Sébastien Kiesgen de Richter (Université de Lorraine); Olivier Farges (Université de Lorraine) |
| #763: Charge neutralizing effect of aluminium stearate in triboelectrification by aerodynamic dispersion [Session S8; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Jiachen Guo (University of Leeds, Nanjing University of Aeronautics); James R Middleton (University of Leeds); Wei Pin Goh (University of Leeds); Xiaodong Jia (University of Leeds); Andrew Scott (University of Leeds); Mojtaba Ghadiri (University of Leeds) |
| #767: Experiments for the liquid film in water-air flow in a vertical annulus [Session S1; Room 403, Topics: Experimental Methods for Multiphase Flows] |
P.J. Muis (Delft University of Technology); A.J. Greidanus (Delft University of Technology); J.M.C. van't Westende (Delft University of Technology); Ruud Henkes (Delft University of Technology) |
| #782: Investigation of transcritical fluid injections using polarized mie scattering in structured illumination [Session S9; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Valerie Gerber (Institute of Aerospace Thermodynamics); Christoph Steinhausen (Institute of Aerospace Thermodynamics); Bernhard Weigand (Institute of Aerospace Thermodynamics); Grazia Lamanna (Institute of Aerospace Thermodynamics) |
| #802: Pressure drop measurements of Taylor bubble in counter-current turbulent flow [Session S2; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Jan Kren (Jožef Stefan Institute); Iztok Tiselj (Jožef Stefan Institute); Blaž Mikuž (Jožef Stefan Institute) |
| #803: Separation of complex oil-water mixtures with an adapted Pitot pump [Session S7; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Jessica Köpplin (Otto von Guericke University Magdeburg); Dominique Thevenin (Otto von Guericke University Magdeburg) |
| #832: Visualization of flow structures in a rectangular spouted bed by neutron imaging [Session S4; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Yasushi Saito (Institute for Integrated Radiation and Nuclear Science, Kyoto University); Daisuke Ito (Institute for Integrated Radiation and Nuclear Science, Kyoto University); Naoya Odaira (Kyoto University); Kei Ito (Kyoto University); Keisuke Kurita (Japan Atomic Energy Agency); Hiroshi Iikura (Japan Atomic Energy Agency) |
| #834: Basic research on integration of ultrasonic level measurement and LIBS elemental analysis for PCV internal detection under mist condition [Session S7; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Yuan Chen (Tokyo institute of technology); Naruki Shoji (Tokyo institute of technology); Zeliang Zhang (Tokyo institute of technology); Tri Vien Tran (Tokyo institute of technology); Hideharu Takahashi (Tokyo Institute of Technology); Hiroshige Kikura (Tokyo institute of technology) |
| #840: Experimental analysis of the influence of gas density on two-phase slug flow in a horizontal pipe [Session S6; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Bruna P Naidek (NUEM - UTFPR); Matheus Pereira (NUEM - UTFPR); Roberto Fonseca Júnior (CENPES/PDIEP/EE Petrobrás); Moisés Marcelino Neto (NUEM - UTFPR); Rigoberto E. M. Morales (NUEM - UTFPR) |
| #842: Development and test of unmaned aerial vehicle for measuring atmospheric particle flow based on multi-resolution holographic imaging and full-scale sonic anemometer [Session S8; Room 403, Topics: Experimental Methods for Multiphase Flows] |
Xiaofei Zhang (Guangdong Technion-Israel Institute of Technology); Biaosheng Luo (Guangdong Technion-Israel Institute of Technology); Yixun Liu (Guangdong Technion-Israel Institute of Technology); Hongtao Qian (Guangdong Technion-Israel Institute of Technology); Cheng Li (Guangdong Technion- Israel Institute of Technology) |
| #55: Computational performance of fully submerged wave energy converter [Session S9; Room 405, Topics: Fluid-Structure Interactions] |
Ranjana Rathaur (Indian Institute of Technology); Patrick Verdin (CRANFIELD UNIVERSITY); Sumana Ghosh (Indian Institute of Technology Roorkee) |
| #242: Free convection in magnetic nanofluids with the effect of magnetic field [Session S10; Room 405, Topics: Fluid-Structure Interactions] |
Aditya Kumar (IIT Bombay); Sudhakar Subudhi (Indian Institute of Technology Roorkee) |
| #366: Dynamic response of a model of DHSV subjected to two-phase flow [Session S9; Room 405, Topics: Fluid-Structure Interactions] |
Luis F Acuña-Alegría (Universidade de São Paulo (USP)); Luis Ortiz-Vidal (Universidad de O'higgins (UOH)); Oscar Rodriguez (USP) |
| #421: Retention dynamics of droplets over soft compliant substrates [Session S10; Room 405, Topics: Fluid-Structure Interactions] |
Syed Ahsan Haider (Indian Institute of Technology, Patna, Bihta 801106); Rohit Rohit (Indian Institute of Technology, Patna, Bihta 801106); Abhishek Raj (Indian Institute of Technology Patna) |
| #423: Dynamics of droplet motion in stenosed deformable microchannel [Session S10; Room 405, Topics: Fluid-Structure Interactions] |
Kumar Amit (Indian Institute of Technology Patna); Ashwani Assam (Indian Institute of Technology Patna); Abhishek Raj (Indian Institute of Technology Patna) |
| #482: Experimental analysis of the point absorber wave energy convertor (PA-WEC) [Session S9; Room 405, Topics: Fluid-Structure Interactions] |
Shivam Gupta (Indian institute of technology Roorkee); Sumana Ghosh (Indian institute of technology Roorkee); Parmod Vaishnav (ONGC Energy Centre); Priti Sarkar (ONGC Energy Centre); Deepak Kumar (ONGC Energy Centre); Bharat Sitaram Mendhe (ONGC Energy Centre) |
| #624: Computation of ship motion in waves, using Cartesian cut-cells [Session S9; Room 405, Topics: Fluid-Structure Interactions] |
Elena-Roxana Popescu (SINTEF); Alexandre Morin (SINTEF); Son Tung Dang (Viettel High Technology Industries Corporation); Stein Tore Johansen (SINTEF) |
| #641: An experimental and numerical study on two-phase cross-flow in a tube bundle [Session S10; Room 405, Topics: Fluid-Structure Interactions] |
Giuseppe Spina (IRSN); Daniele Vivald (IRSN)i; Guillaume Brillant (IRSN); Catherine Colin (IMFT); William Benguigui (EDF); Muriel Lelong (EDF) |
| #780: Wave propagation induced by a vortex for fibers clamped on the wall [Poster Session; Reception Hall] |
Shota Akita (Osaka University); Takehiro Fujii (Osaka University); Kie Okabayashi (Osaka University); Shintaro Takeuchi (Osaka University) |
| #44: Using branched ionic surfactants for enhanced spreading of aqueous formulations [Session S2; Room 504, Topics: Interfacial Flows] |
Nina M Kovalchuk (University of Birmingham); Masanobu Sagisaka (Hirosaki University); Hinata Komiyama (Hirosaki University); Nikhil Patani (University of Birmingham); James Haines (University of Birmingham); Mark Simmons (University of Birmingham) |
| #89: Breakup of surfactant liquid jet by a coaxial atomizer [Session S1; Room 504, Topics: Interfacial Flows] |
Mathieu Alonzo (University Grenoble Alpes); Zhujun Huang (University Grenoble Alpes); Alain Cartellier (University Grenoble Alpes) |
| #116: A depth–integral model for weakly–compressible falling films [Session S2; Room 504, Topics: Interfacial Flows] |
Paolo Botticini (Università degli studi di Brescia); Gianluca Lavalle (Mines Saint–Étienne); Davide Picchi (Università degli Studi di Brescia); Pietro Poesio (Università di Brescia) |
| #120: A new Saint-Venant model for macroscale simulations of moving contact lines [Session S3; Room 504, Topics: Interfacial Flows] |
Bastien Delacroix (ONERA); Ghislain Blanchard (ONERA); Maxime Bouyges (ONERA); Claire Laurent (ONERA); Philippe Villedieu (ONERA) |
| #226: Direct numerical simulation of coaxial atomisation in fiber regime [Session S1; Room 504, Topics: Interfacial Flows] |
Jean-Christophe Hoarau (ONERA); Florian Granger (ONERA); Luc-Henry Dorey (ONERA); Davide Zuzio (ONERA); Jean-Luc Estivalezes (ONERA) |
| #232: Ribbing patterns in rotating Landau-Levich drag-out problem. [Session S2; Room 504, Topics: Interfacial Flows] |
Rosie Cates (ENS Lyon); Pierre Trontin (Univ. Lyon / LMFA); J. John Soundar Jerome (Univ. Lyon / LMFA); Jean-Philippe Matas (Univ. Lyon / LMFA) |
| #299: Pinhole growth in a coated liquid film on a non-wetting substrate [Session S4; Room 504, Topics: Interfacial Flows] |
Shunji Homma (Saitama University); Takumi Chiba (Saitama University); Ryota Nakajima (Saitama University) |
| #323: Characterization of a capillary driven flow in microgravity by means of optical techniques [Session S4; Room 504, Topics: Interfacial Flows] |
Domenico Fiorini (von Karman Institute for Fluid Dynamics); Louis Carbonnelle (von Karman Institute for Fluid Dynamics); Alessia Simonini (von Karman Institute for Fluid Dynamics); Johan Steelant (European Space Agency); David Seveno (KU Leuven); Miguel Mendez (von Karman Institute for Fluid Dynamics) |
| #374: An AI super-resolution method for subfilter modeling of interfacial flows [Session S2; Room 504, Topics: Interfacial Flows] |
Mathis Bode (Forschungszentrum Juelich GmbH) |
| #430: Accuracy of a diffuse interface model for LES of gas-assisted atomization [Session S1; Room 504, Topics: Interfacial Flows] |
Florian Granger (ONERA); Luc-Henry Dorey (ONERA); Jean-Christophe Hoarau (ONERA); Davide Zuzio (ONERA); Jean-Luc Estivalezes (ONERA) |
| #463: Experimental investigations of particle scale liquid distribution in packed bed reactors: effect of particle shape and particle arrangement [Session S5; Room 504, Topics: Interfacial Flows] |
Devesh Saxena (IIT Delhi); Vivek V. Buwa (IIT Dehi) |
| #568: Numerical study on the primary atomization in gas-liquid pintle injector [Session S1; Room 504, Topics: Interfacial Flows] |
Tai Jin (Zhejiang University); Tinglan Tang (Zhejiang University); Wei Lin (Zhejiang University of Technology); Shuihua Zheng (Zhejiang University of Technology); Kun Luo (Zhejiang University); Jianren Fan (Zhejiang University) |
| #640: New perspectives on capillary rise from complexity reduced models [Session S4; Room 504, Topics: Interfacial Flows] |
Mathis Fricke (TU Darmstadt); Suraj Raju (TU Darmstadt); El Assad Ouro-Koura (TU Darmstadt); Joël De Coninck (Université libre de Bruxelles); Dieter Bothe (TU Darmstadt) |
| #667: Ultrasonic atomization characterized by protruding free surface to emanating beads fountain prior to mist spreading [Session S5; Room 504, Topics: Interfacial Flows] |
Xiaolu Wang (Doshisha University); Katsumi Tsuchiya (Doshisha University) |
| #668: An experimental study of flow patterns near a moving contact line [Session S3; Room 504, Topics: Interfacial Flows] |
Charul Gupta (IIT Hyderabad); Lakshmana Chandrala (IIT Hyderabad); Harish N Dixit (IIT Hyderabad) |
| #678: Dynamic surface tension of molten solder in oxidative environment [Session S4; Room 504, Topics: Interfacial Flows] |
Tatsuro Wakimoto (Osaka Metropolitan University); Kenji Katoh (Osaka Metropolitan University); Yoshiaki Ueda (Setsunan University); Manabu Iguchi (Osaka Metropolitan University) |
| #766: Investigation of plug hole vortices during the drainage of water from a rectangular tank using two outlets [Session S5; Room 504, Topics: Interfacial Flows] |
Rahul Kumar Mondal (IIT MANDI); Parmod Kumar (IIT MANDI) |
| #778: Numerical study of film thickness in gas-liquid counter current annular flow [Session S5; Room 504, Topics: Interfacial Flows] |
Samiksha Samiksha (Indian institute of technology Roorkee); Sumana Ghosh (Indian institute of technology Roorkee); Shabina Khanam (Indian institute of technology Roorkee) |
| #804: Experimental study on gas entrainment by bathtub vortex [Session S5; Room 504, Topics: Interfacial Flows] |
Kei Ito (Kyoto University); Daisuke Ito (Kyoto University); Naoya Odaira (Kyoto University); Yasushi Saito (Institute for Integrated Radiation and Nuclear Science, Kyoto University); Kelei Song (Kyoto University); Toshiki Ezure (Japan Atomic Energy Agency); Kentarou Matsushita (Japan Atomic Energy Agency); Masaaki Tanaka (Japan Atomic Energy Agency) |
| #857: Simulating wetting of geometrically complex surfaces using the unstructured volume-of-fluid method [Session S3; Room 504, Topics: Interfacial Flows] |
Muhammad Hassan Asghar (TU Darmstadt); Tomislav Maric (TU Darmstadt); Mathis Fricke (TU Darmstadt); Dieter Bothe (TU Darmstadt) |
| #858: Contact line advection using a finite volume ALE interface tracking method [Session S3; Room 504, Topics: Interfacial Flows] |
Suraj Raju (TU Darmstadt); Tomislav Maric (TU Darmstadt); Zeljko Tukovic (University of Zagreb); Dieter Bothe (TU Darmstadt); Mathis Fricke (TU Darmstadt) |
| #98: Sloshing in a food processor [Session S10; Room 404, Topics: Instabilities] |
Tomoaki Watamura (Kyoto Institute of Technology); Kazuyasu Sugiyama (Osaka University) |
| #119: Stability of two-phase stratified flow: effect of channel geometry [Session S10; Room 404, Topics: Instabilities] |
Ilya Barmak (Tel Aviv University); Alexander Gelfgat (Tel Aviv University); Neima Brauner (Tel-Aviv University) |
| #354: Effect of Plateau-Rayleigh instability on the transition of stratified liquid-liquid flow [Session S10; Room 404, Topics: Instabilities] |
Pedro José Miranda Lugo (University of São Paulo); Jorge Enrique Arrollo Caballero (universidade de são paulo); Marlon Hernandez Cely (Federal University of Pelotas); Oscar Hernandez Rodriguez (University of São Paulo) |
| #535: Experimental investigation of the transition between linear sloshing to chaotic regimes [Session S10; Room 404, Topics: Instabilities] |
Jean Muller (von Karman Institute (VKI)); Antonio Cantiani (von Karman Institute (VKI)); Philippe Planquart (von Karman Institute (VKI)); Delphine Laboureur ( von Karman Institute (VKI)) |
| #688: Dynamics of liquid alloy elongation and pinch-off process [Session S11; Room 404, Topics: Instabilities] |
Mengjia Ren (Kyushu University); Haruka Yasuhara (Kyushu University); Zhengying Wang (Kyushu University); Chihiro Inoue (Kyushu University) |
| #695: Contact line driven instability of thin fluid film over spherical surface [Session S11; Room 404, Topics: Instabilities] |
Ananthan Mohan (Indian Institute of Science Bangalore); Gaurav Tomar (Indian Institute of Science Bangalore) |
| #724: Photoelastic measurement and numerical investigation on viscous fingering [Session S11; Room 404, Topics: Instabilities] |
Misa Kawaguchi (Tokyo University of Agriculture and Technology); Harumi Yagi (Tokyo University of Agriculture and Technology); Ryuta X. Suzuki (Tokyo University of Agriculture and Technology); Masakazu Muto (Nagoya Institute of Technology); Yuichiro Nagatsu (Tokyo University of Agriculture and Technology); Yoshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
| #750: Theoretical study of metal pad roll instability in a liquid metal battery. [Session S12; Room 404, Topics: Instabilities] |
Antoine Simon (INSA Rouen Normandie); Marie-Charlotte Renoult (INSA Rouen Normandie); Jorge César Brändle de Motta (CORIA); Christophe Dumouchel (CORIA / CNRS) |
| #781: Interfacial instabilities on the miscible liquids column generated by a rising deformable bubble [Session S12; Room 404, Topics: Instabilities] |
Kyuseong Choi (Seoul Nat'l Univ.); Hyungmin Park (Seoul Nat'l Univ.) |
| #818: Viscous theory for three-layer Rayleigh-Taylor instability [Session S12; Room 404, Topics: Instabilities] |
Antoine Simon (INSA Rouen Normandie); Marie-Charlotte Renoult (INSA Rouen Normandie) |
| #109: Numerical simulation of surfactant-laden emulsion formation in a stirred vessel [Session S12; Room 503, Topics: Mixing] |
Fuyue Liang (Imperial College London); Juan P. Valdes (Imperial College London); Lyes Kahouadji (Imperial College London); Seungwon Shin (Hongik University); Jalel Chergui (LISN-CNRS); Damir Juric (LISN-CNRS); Omar Matar (Imperial College London) |
| #115: modelling and simulation of particle milling in a stirred tank using a coupled approach CFD-PBE [Session S12; Room 503, Topics: Mixing] |
Zoé Am Mercier (CEA); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Maxime Pigou (IMFT); Eric Climent (IMFT); Jean-Philippe Bayle (CEA, DES, ISEC, DMRC, Universite de Montpellier); Eric Tronche (CEA, DES, ISEC, DMRC, Universite de Montpellier) |
| #117: Direct numerical simulations of the dispersion dynamics of complex flows in static mixers with surfactants [Session S10; Room 503, Topics: Mixing] |
Juan P. Valdes (Imperial College London); Fuyue Liang (Imperial College London); Lyes Kahouadji (Imperial College London); Seungwon Shin (Hongik University); Jalel Chergui (LISN/CNRS); Damir Juric (LISN/CNRS); Omar Matar (Imperial College London) |
| #303: Numerical study of the flow dynamics of bi-swirl injector using OpenFOAM [Session S11; Room 503, Topics: Mixing] |
Vishnu Natarajan (Pusan National University); Jeong-Yeol Choi (Pusan National University) |
| #306: Scale down of a mixer: validation of a numerical model and investigation of the droplet size distribution [Session S10; Room 503, Topics: Mixing] |
Quentin Laine (CEA); Tojonirina Randriamanantena (CEA); Fabrice Lamadie (CEA); Eric Olmos (Université de Lorraine) |
| #358: Electroosmotic migration and mixing of viscoelastic fluid in micro nozzle/diffuser [Session S11; Room 503, Topics: Mixing] |
Ameeya Kumar Nayak (IIT Roorkee); Minakshmi Majhi (IIT Roorkee); Bernhard Weigand (University of Stuttgart) |
| #544: Identification of compartments in stirred tank reactors by analysing Lagrangian coherent structures from velocity fields derived by the lattice-Boltzmann-method [Session S12; Room 503, Topics: Mixing] |
Christian Weiland (Hamburg University of Technology); Eike Steuwe (Hamburg University of Technology); Alexandra von Kameke (Hamburg University of Applied Sciences); Marko Hoffmann (Hamburg University of Technology); Michael Schlüter (Hamburg University of Technology) |
| #562: Development of an experimental protocol to study the effect of shear rate on sweep flocculation in a water-in-oil emulsion [Session S11; Room 503, Topics: Mixing] |
Marcio B Machado (University of Alberta); Aakanksha Bhargava (University of Alberta); R. Sean Sanders (University of Alberta) |
| #594: Numerical investigations of mixing in a shallow vessel: role of recirculatory flow structures and turbulent transport [Session S12; Room 503, Topics: Mixing] |
Sayantan Biswas (IIT Delhi); Vivek Buwa (IIT Delhi) |
| #596: Hydrodynamic characterization and identification of heterogeneities in stirred tank reactors by means of 4D particle trajectories [Session S12; Room 503, Topics: Mixing] |
Jürgen Fitschen (Hamburg University of Technology); Felix Kexel (Hamburg University of Technology);Sebastian Hofmann (Hamburg University of Technology); Maike Kuschel (Boehringer Ingelheim Pharma GmbH & Co. KG); Marko Hoffmann (Hamburg University of Technology); Thomas Wucherpfennig (Boehringer Ingelheim Pharma GmbH & Co. KG); Michael Schlüter (Hamburg University of Technology) |
| #654: Flow and mixing in a rotating spherical container with a gas-liquid interface [Session S10; Room 503, Topics: Mixing] |
Daiki Watanabe (Osaka University); Susumu Goto (Osaka University) |
| #677: Numerical study of mixing in reactive jet impingement (ReJI) for 3D bioprinting [Session S11; Room 503, Topics: Mixing] |
Elfego Ruiz-Gutierrez (Newcastle University); Josef Hasslberger (Bundeswehr University Munich); Markus Klein (Bundeswehr University); Kenny Dalgarno (Newcastle University); Nilanjan Chakraborty (Newcastle University) |
| #726: Numerical study of ethanol into water mixing using split and recombine micromixer [Session S10; Room 503, Topics: Mixing] |
Amritendu B Ghosh (Indian Institute of Technology Kharagpur); Arnab Atta (Indian Institute of Technology Kharagpur) |
| #29: A coupled CFD model of lyophilization for the laboratory freeze dryer case [Session S6; Room 402, Topics: Modelling of Multiphase Flows] |
Blaz Kamenik (University of Maribor, Faculty of Mechanical Engineering); Matej Zadravec (University of Maribor, Faculty of Mechanical Engineering); Jure Ravnik (University of Maribor); Matjaz Hribersek (University of Maribor, Faculty of Mechanical Engineering) |
| #129: Experimental and numerical investigation of a multiphase flow in a rectangular channel at moderate Mach numbers [Session S10; Room 402, Topics: Modelling of Multiphase Flows] |
Benedikt Faraji-Tajrishi (University of Stuttgart Insitute of Aerospace Thermodynamics); Philipp Wellinger (University of Stuttgart Insitute of Aerospace Thermodynamics); Marwan Khaled (University of Stuttgart Insitute of Aerospace Thermodynamics); Marius Forster (University of Stuttgart Insitute of Aerospace Thermodynamics); Bernhard Weigand (University of Stuttgart Insitute of Aerospace Thermodynamics) |
| #137: Hydrodynamics of gas-liquid flow in jumpers of subsea gas production systems [Session S10; Room 402, Topics: Modelling of Multiphase Flows] |
Alexander Yurishchev (Tel Aviv University); Benny Ravid (Tel Aviv University); Amos Ullmann (Tel Aviv University); Neima Brauner (Tel-Aviv University) |
| #143: A model for tracking superellipsoidal particles in multiphase flows [Session S4; Room 402, Topics: Modelling of Multiphase Flows] |
Mitja Štrakl (University of Maribor); Jana Wedel (Friedrich-Alexander Universität Erlangen Nürnberg); Matjaz Hribersek (University of Maribor, Faculty of Mechanical Engineering); Paul Steinmann (Chair of Applied Mechanics, Friedrich-Alexander University Erlangen-Nürnberg); Jure Ravnik (University of Maribor) |
| #149: On the simulation of two-phase cross-flow in a tube bundle guided by experimental forces spectra [Session S8; Room 402, Topics: Modelling of Multiphase Flows] |
Clément Bazin (CEA); Maria-Giovanna Rodio (CEA); Romain Lagrange (CEA); Christophe Josserand (LadHyX, CNRS & E. Polytechnique) |
| #172: Comparison of population balance models for polydisperse bubbly flow in a constricted vertical pipe [Session S2; Room 402, Topics: Modelling of Multiphase Flows] |
Victor Habiyaremye (NRG); Hans Kuerten (TU Eindhoven); Edo Frederix (NRG) |
| #173: Numerical modelling of water flashing at sub-atmopsheric pressure [Session S2; Room 402, Topics: Modelling of Multiphase Flows] |
Clément Loiseau (EDF); Stéphane Mimouni (EDF); Dider Colmont (EDF); Stéphane Vincent (Université Gustave Eiffet) |
| #176: High-fidelity modeling of the drying kinetics and lifetimes of saliva droplets in airborne transmission of COVID-19 [Session S6; Room 402, Topics: Modelling of Multiphase Flows] |
Gizem Özler (physikalisch technische bundesanstalt); Holger Grosshans (physikalisch technische bundesanstalt) |
| #194: Phase inversion modeling in oil-water-gas three-phase annular-duct flow [Session S5; Room 402, Topics: Modelling of Multiphase Flows] |
Johann E Castro (University of São Paulo); Oscar Rodriguez (University of São Paulo) |
| #223: Resolved and unresolved: morphology transfers in OpenFOAM-hybrid [Session S1; Room 402, Topics: Modelling of Multiphase Flows] |
Benjamin Krull (Helmholtz-Zentrum Dresden-Rossendorf (HZDR)); Richard Meller (Helmholtz-Zentrum Dresden-Rossendorf (HZDR)); Fabian Schlegel (Helmholtz-Zentrum Dresden-Rossendorf (HZDR)); Matej Tekavčič (Jožef Stefan Institute) |
| #234: Experimental studies on velocities of gas- and solid-phases in gas–liquid–solid three-phase flow for subsea resource productions [Session S10; Room 402, Topics: Modelling of Multiphase Flows] |
Satoru Takano (National Maritime Research Institute); Sotaro Masanobu (National Maritime Research Institute); Shigeo Kanada (National Maritime Research Institute); Masao Ono (National Maritime Research Institute) |
| #237: Development of a diffuse interface methodology in a high-order flux-reconstruction framework [Session S1; Room 402, Topics: Modelling of Multiphase Flows] |
Simon Blanchard (JAXA); Junya Aono (RCCM); Takanori Haga (JAXA) |
| #248: Assessment of INSS drift-flux correlation for rod bundle at low-flow and low-pressure conditions [Session S1; Room 402, Topics: Modelling of Multiphase Flows] |
Ikuo Kinoshita (Institute of Nuclear Safety System, Inc.); Takashi Hibiki (City University of Hong Kong); Xiuzhong Shen (KU) |
| #260: Surface waves of high Reynolds-number film flow over a rotating disk [Session S10; Room 402, Topics: Modelling of Multiphase Flows] |
Dong Ju Kim (KAIST); Daegyoum Kim (KAIST) |
| #261: Hydrodynamics inside packed beds of spherocylinders; magnetic resonance imaging and pore network modelling approaches [Session S6; Room 402, Topics: Modelling of Multiphase Flows] |
Ali Fathiganjehlou (TU Eindhoven); Noah Romijn (TU Eindhoven); Y.E.I. (Yasmine) Bergmans (TU Eindhoven); E.A.J.F. (Frank) Peters (TU Eindhoven); Maike Baltussen (Eindhoven University of Technology); K.A. (Kay) Buist (TU Eindhoven); J.A.M. (Hans) Kuipers (TU Eindhoven) |
| #275: A numerical study of the influence of heated atomization gas on the compressible two-phase flows in a close-coupled atomizer [Session S7; Room 402, Topics: Modelling of Multiphase Flows] |
Alexander Ariyoshi Zerwas (University of São Paulo); Manuel Falcone (John Wood Group PLC ); José Luis de Paiva (University of São Paulo); Roberto Guardani (University of São Paulo); Lydia Achelis (University Bremen); Udo Fritsching (University Bremen) |
| #319: Gas liquid flow in hilly terrain pipelines – single and multiple sections [Session S3; Room 402, Topics: Modelling of Multiphase Flows] |
Yehuda Taitel (Tel Aviv University); Dvora Barnea (Tel Aviv University) |
| #324: Derivation of drag and lift forces and torques experienced by non-spherical particles in wall-bounded linear shear flow [Session S9; Room 402, Topics: Modelling of Multiphase Flows] |
Victor Chéron (Otto-von-Guericke Universität); Manuel A Taborda (Otto von Guericke University Magdeburg); Martin Sommerfeld (Otto-von-Guericke University Magdeburg); Berend van Wachem (University of Magdeburg) |
| #344: Effect of droplet injection in the hydrodynamic of a riser system [Session S9; Room 402, Topics: Modelling of Multiphase Flows] |
Juan G Ramirez (Eindhoven University of Technology); Levi Peene (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
| #372: High-fidelity simulation of a pressure swirl fuel atomizer: in-depth analysis of in-nozzle flow dynamics and liquid sheet disintegration [Session S7; Room 402, Topics: Modelling of Multiphase Flows] |
Julien Carmona (CORIA); Julien Leparoux (Safran Tech); Vincent Moureau (CORIA) |
| #386: Assessment of point-particle models for non-spherical particles in turbulent flow [Session S4; Room 402, Topics: Modelling of Multiphase Flows] |
Laurent André (RWTH Aachen University); Thede Peter Kiwitt (RWTH Aachen University); Matthias Meinke (RWTH Aachen University); Wolfgang Schröder (RWTH Aachen University) |
| #395: Particle-resolved study of wetting in a trickle bed reactor [Session S6; Room 402, Topics: Modelling of Multiphase Flows] |
Arvin Tavanaei (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
| #405: Explainable AI for multifluid flow: how does a trained convolutional neural network interpret droplet coalescence in diamond-shaped microchannel? [Session S8; Room 402, Topics: Modelling of Multiphase Flows] |
Masahiro Furuya (Waseda University); Tomoya Murashige (Waseda University); Hirotaka Tanaka (Waseda University); Kohei Yamanaka (Waseda University); Manabu Asahi (Waseda University); Daiki Tanaka (Waseda University); Tetsushi Sekiguchi (Waseda University); Shuichi Shoji (Waseda University) |
| #456: Numerical investigation of the break-up of liquid jets and sheets in a gas media. [Session S7; Room 402, Topics: Modelling of Multiphase Flows] |
Cristina Garcia Llamas (Eindhoven University of Technology); Vivekanand V Swami (Eindhoven University of Technology); Vilena Petrova (Eindhoven University of Technology); Koen Jennekens (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology) |
| #462: Understanding the motion of selected dry-coated powders in swirl-based dry powder inhalation devices [Session S4; Room 402, Topics: Modelling of Multiphase Flows] |
Francesca O Alfano (University of Calabria); Alberto Di Renzo (University of Calabria); Francesco Paolo Di Maio (University of Calabria) |
| #466: Experimental and computational modeling of solid-liquid mixing in an oscillatory baffled reactor containing multi-orifice baffle geometry [Session S3; Room 402, Topics: Modelling of Multiphase Flows] |
Partha Pratim Mondal (Indian Institute of Technology, Delhi); Rohan Jain (Helmholtz-Zentrum Dresden-Rossendrof, Helmholtz Institute Freiberg for Resource Technology); Shaikh Z. Ahammad (Indian Institute of Technology, Delhi) |
| #471: Aeration of large free-falling jet and its impact on solid ground and liquid ponds [Session S7; Room 402, Topics: Modelling of Multiphase Flows] |
Diego Ferrando (Université de Rouen Normandie); Hakim Hamdani (Université de Rouen Normandie); Javier Anez (EDF); Yvan Bercovitz (EDF); Benjamin Duret (Université de Rouen Normandie); Julien Reveillon (Université de Rouen Normandie); François-Xavier Demoulin (Université de Rouen Normandie) |
| #486: Assessment of multi-fluid, shallow-water thin film and DPM approaches for the numerical simulation of a bearing chamber [Session S2; Room 402, Topics: Modelling of Multiphase Flows] |
Nikolay K Kirov (Onera); Jean-Mathieu Senoner (Onera); Davide Zuzio (Onera); Mathieu Picard (Onera); Jean-Luc Estivalezes (Onera) |
| #516: Interface retaining coarsening of complex multiphase flows [Session S1; Room 402, Topics: Modelling of Multiphase Flows] |
Xianyang Chen (Johns Hopkins University); Jiacai Lu (Johns Hopkins University); Gretar Tryggvason (Johns Hopkins University) |
| #532: A multi-scale Eulerian-Lagrangian method based on unstructured AMR for the simulation of atomization [Session S7; Room 402, Topics: Modelling of Multiphase Flows] |
Ibtissam El Yamani (CORIA); Romain Janodet (CORIA); Mélody Cailler (Safran Tech); Renaud Mercier (Safran Tech); Vincent Moureau (CORIA) |
| #542: Oscillations of a micro bubble under a free interface [Session S9; Room 402, Topics: Modelling of Multiphase Flows] |
Gautier Dussuyer (IMFT/Poietis); Antonio Iazzolino (Poietis); Dominique Legendre (IMFT) |
| #570: Euler-Euler simulation of air-water flow in a bubble column using method of classes population balance: validation with radioactive particle tracking (RPT) [Session S2; Room 402, Topics: Modelling of Multiphase Flows] |
Manoj Kumar Beriya (Indian Institute of Technology Delhi); Shantanu Roy (Indian Institute of Technology Delhi) |
| #606: Wavelet-based kinematic simulation of particle-laden flows [Session S4; Room 402, Topics: Modelling of Multiphase Flows] |
Roxane Letournel (Safran); Marc Massot (CMAP, Ecole Polytechnique); Aymeric Vié (EM2C, CentraleSupélec) |
| #610: Pore network modeling of packed beds of non-spherical particles [Session S6; Room 402, Topics: Modelling of Multiphase Flows] |
Amirhossein Eghbalmanesh (Eindhoven University of Technology); Ali Fathiganjehlou (TU Eindhoven); Martijn Hoogendoorn (Eindhoven University of Technology); Marijana Miloshevska (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Frank Peters (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
| #642: A two-scale two-phase flow model with capillarity and small-scale reduced-order model based on a geometric method of moments [Session S8; Room 402, Topics: Modelling of Multiphase Flows] |
Arthur Loison (CMAP, École polytechnique); Samuel Kokh (CEA); Teddy Pichard (CMAP, École polytechnique); Marc Massot (CMAP, Ecole Polytechnique) |
| #647: Numerical Simulation of Two-phase CO2 Ejector Flows Using the Implicit Density-based SU2 Solver and Comparative Analysis of HEM and HRM Models [Session S3; Room 402, Topics: Modelling of Multiphase Flows] |
Antoine Metsue (UCLouvain); Sebastien Poncet (Université de Sherbrooke); Yann Bartosiewicz (Université Catholique de Louvain) |
| #661: Modelling of stratified flows and slug flow transition with an all flow regime CFD model [Session S5; Room 402, Topics: Modelling of Multiphase Flows] |
Marco Colombo (University of Sheffield) |
| #669: A hybrid solver to resolve strong interactions between liquid films and gas flows [Session S1; Room 402, Topics: Modelling of Multiphase Flows] |
David Barreiro-Villaverde (Universidade da Coruña); Anne Gosset (Universidade da Coruña); Miguel A. Mendez (von Karman Institute for Fluid Dynamics); Marcos Lema (Universidade da Coruña) |
| #710: Simulation of two-phase air / water flows in bubbly flow in horizontal pipe [Session S5; Room 402, Topics: Modelling of Multiphase Flows] |
Bruno Raverdy (CEA) |
| #748: Direct numerical simulation of boiling in microgravity conditions [Session S3; Room 402, Topics: Modelling of Multiphase Flows] |
Loric Torres (IMFT); Catherine Colin (IMFT); Sébastien Tanguy (IMFT); Annafederica Urbano (ISAE-SUPAERO) |
| #756: Simulations of the flow of viscous oil with water in a horizontal pipe [Session S5; Room 402, Topics: Modelling of Multiphase Flows] |
Haoyu Li (Delft University of Technology); M.J.B.M. Pourquie (Delft University of Technology); G. Ooms (Delft University of Technology); Ruud Henkes (Delft University of Technology) |
| #786: Derivation of fully closed two-phase models of Baer-and-Nunziato type [Session S9; Room 402, Topics: Modelling of Multiphase Flows] |
Vincent Perrier (INRIA) |
| #798: Well-posedness and stability of two-fluid model equations for high speed bubbly flow [Poster Session; Reception Hall] |
Takahiro Ayukai (University of Tsukuba); Tetsuya Kanagawa (University of Tsukuba) |
| #845: Development of numerical prediction method for bubble coalescence phenomenon under the mercury flows [Session S8; Room 402, Topics: Modelling of Multiphase Flows] |
Gen Ariyoshi (Japan Atomic Energy Agency); Kei Ito (Kyoto University); Hiroyuki Kogawa (Japan Atomic Energy Agency); Masatoshi Futakawa (Japan Atomic Energy Agency) |
| #862: Swirling gas-liquid vertical pipe flow: a mechanistic modelling framework [Session S8; Room 402, Topics: Modelling of Multiphase Flows] |
Matheus M. Garcia (Delft University of Technology); Dion Ammerlaan (Delft University of Technology); Bart van der Zalm (Delft University of Technology); Luis Portela (Delft University of Technology) |
| #31: Evaporation and vapor mixing in turbulent two-phase flows [Session S10; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Leandro Germes Martinez (CORIA-UMR 6614); Benjamin Duret (CORIA-UMR 6614); Julien Reveillon (CORIA-UMR 6614); François-Xavier Demoulin (CORIA-UMR 6614) |
| #35: Phase transition modelling for cavitation applications [Session S9; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Eric Goncalves (ISAE-ENSMA); Damien Colombet (Université Grenoble-Alpes) |
| #50: Experimental investigations on rod bundle cooling by a water spray in spent fuel pool accident conditions [Session S8; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Guillaume Brillant (IRSN) |
| #62: Improvements on a direct-ALE scheme for multiphase flows with thermodynamic consistency [Poster Session; Reception Hall] |
Thibaud Vazquez-Gonzalez (CEA) |
| #63: direct numerical simulation of gas-liquid mass transfer around contaminated bubbles [Session S6; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Kalyani Kentheswaran (Université de Toulouse); Nicolas Dietrich (Université de Toulouse); Benjamin Lalanne (University of Toulouse - Toulouse INP) |
| #87: Heat transport and flow structure in turbulent multi-phase Rayleigh-Bénard convection [Session S11; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Detlef Lohse (Physics of Fluids Group, Max-Planck Center Twente for Complex Fluid Dynamics & JM Burgers Center, Department of Science and Technology, University of Twente); Hao-Ran Liu (University of Twente); Kai Leong Chong (University of Twente); Rui Yang (University of Twente); Robetro Verzicco (University of Twente) |
| #108: A dynamic of chocolate fountain: multi-physics, multi-phase, and multi-scale modeling [Session S9; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Lyes Kahouadji (Imperial College London); Seungwon Shin (Hongik University); Jalel Chergui (LISN-CRNS); Damir Juric (LISN-CNRS); Omar Matar (Imperial College London) |
| #135: Numerical study on the thermal effect of porous media in Rayleigh-Bénard convection [Session S11; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Jun Zhong (Tsinghua University); Shuang Liu (Tsinghua University); Chao Sun (Tsinghua University) |
| #142: Mass transfer measurements of a self-pumping transpiration cooling system [Session S6; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Julian Härter (University of Stuttgart); Christoph Steinhausen (University of Stuttgart); Rico Poser (University of Stuttgart); Grazia Lamanna (University of Stuttgart) |
| #152: Investigation of two-phase flow in ascending pipeline using particle image velocimetry [Session S10; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Yubo Jin (Gyeongsang National University); Guangxin Ding (Gyeongsang National University); Hyoung-Bum Kim (Gyeongsang National University) |
| #222: Enhanced mass transfer performance of aerated stirred tank reactors by modification of the standard Rushton turbine [Poster Session; Reception Hall] |
Ingrid Caroline Haase (Hamburg University of Technology); Jürgen Fitschen (Hamburg University of Technology); Maike Kuschel (Boehringer Ingelheim Pharma GmbH & Co. KG); Thomas Wucherpfennig (Boehringer Ingelheim Pharma GmbH & Co. KG); Michael Schlüter (Hamburg University of Technology) |
| #272: Numerical simulation of the dynamics of a multicomponent droplet in water using the phase-field model of TrioCFD code [Session S7; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Mirantsoa Aimé Rasolofomanana (French Alternative Energies and Atomic Energy Commission CEA), Romain Le Tellier (CEA); Herve Henry (Institut Polytechnique de Paris) |
| #277: Numerical study of high Prandtl number liquid jet impacting a heated wall: application to the cooling of electric machines [Session S12; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Xiaohan Bai (IFPEN); Adele Poubeau (IFPEN); Guillaume Vinay (IFP Energies nouvelles); Clement Renon (P’ Institute, CNRS, ENSMA); Matthieu Fenot (P’ Institute, CNRS, ENSMA) |
| #281: Boiling and condensation of a two-phase closed thermosyphon under horizontal vibration [Session S11; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Sohyeun Kang (KAIST); Daegyoum Kim (KAIST) |
| #312: On the flow field and heat transfer characteristics of a supercritical co2-cooled micro heatsink under high heat flux conditions [Session S8; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Farzad Pourfattah (Southern University of Science and Technology); Lian-Ping Wang (Southern University of Science and Technology); Wei-Mon Yan (National Taipei University of Technology) |
| #331: Investigation of the effects of fluid velocity and liquid properties on the multiphase regimes in horizontal rectangular ducts [Session S7; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Ahmed Abou Sherif (University of Nottingham); Kathy Johnson (University of Nottingham); David Hann (The University of Nottingham) |
| #341: Evaluation of bubble liftoff correlations for forced convective subcooled boiling at pressures of 1-10 bar [Session S8; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Randy D Samaroo (City College of New York); Masahiro Kawaji (City College of New York) |
| #411: Two-phase ionic liquid based aqueous biphasic systems for separation of biomolecules in small channels [Session S10; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Yiota Victoria Phakoukaki (UCL), Paul O'Shaughnessy (UCL); Panagiota Angeli (UCL) |
| #416: Ablation of a solid by a circular immersed or free-surface jet [Session S12; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Antoine Avrit (Université de Lorraine, LEMTA); Michel Gradeck (Université de Lorraine, LEMTA); Nicolas D. Rimbert (Université de Lorraine); Alexandre Lecoanet (CEA, IRESNE, DTN, SMTA); Nathalie Seiler (CEA, IRESNE, DTN, SMTA) |
| #420: FIMF: a filtered-interface multi-fluid approach coupled with the conservative level set method for LES of two-phase heat transfer [Session S9; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
François Pecquery (CNRS); Vincent Moureau (CNRS); Mélody Cailler (SAFRAN); Cindy Merlin (ArianeGroup) |
| #435: Dendrite growing on a cold substrate [Session S7; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Kuan-Ling Huang (LadHyX); Christophe Josserand (LadHyX); Stephane Popinet (Institut Jean Le Rond d'Alembert); Alexandre Limare (LadHyX) |
| #448: Natural convection heat transfer between vertical parallel plates in water with millimeter-bubble injection [Session S12; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Atsuhide Kitagawa (Kyoto Institute of Technology); Yuichi Murai (Hokkaido University) |
| #467: Effect of external electric field on freezing initiation of supercooled water due to characteristics of vertical pipe inner surface [Poster Session; Reception Hall] |
Wataru Matsumoto (Kanazawa Institute of Technology); Masanori Fujimoto (Kanazawa Institute of Technology) |
| #494: Thermal sub-grid boundary layer modelling around bubbles at moderate Reynolds and Prandtl numbers [Session S12; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Mathis Grosso (CEA); Guillaume Bois (CEA); Adrien Toutant (PROMES, CNRS) |
| #505: A Cartesian cut cell method for phase-change problems : study of the Rayleigh-Bénard instability with melting boundary [Poster Session; Reception Hall] |
Tomas Fullana (Sorbonne University); A. Quiros Rodriguez (Sorbonne University); V. Le Chenadec (Gustave Eiffel University); T. Sayadi (Sorbonne University) |
| #526: Dynamics of lateral hydrate growth and associated interfacial heat transfer processes: backlight visualisation and temperature measurements [Session S7; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Muhammad Kamel (Imperial College London); Aleksei Lobasov (Imperial College London); Suryanarayan Lakshminarayan (Imperial College London); Konstantin S. Pervunin (Imperial College London); Christos Markides (Imperial College London) |
| #528: Modeling of conjugate heat transfer in two-phase flows with large-eddy simulation [Session S9; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Cindy Merlin (ArianeGroup); Melody Cailler (SafranGroup); François Pecquery (CNRS); Vincent Moureau (CNRS) |
| #558: Study of behavior of multiple dispersed phases in a continuous phase under an electric field [Poster Session; Reception Hall] |
Daiki Inaba (Kanazawa Institute of Technology); Masanori Fujimoto (Kanazawa Institute of Technology) |
| #590: Recent studies of dry and wet spreading of corium simulant melt at KTH [Session S8; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Maneesh Punetha (KTH Royal Institute of Technology); Lu Zhao (KTH Royal Institute of Technology); Andrei Komlev (KTH Royal Institute of Technology); Alexander Konovalenko (KTH Royal Institute of Technology); Weimin Ma ( KTH Royal Institute of Technology); Sevostian Bechta (KTH Royal Institute of Technology) |
| #592: Active control of coffee-ring effect using contact angle hysteresis and magnetic field [Session S7; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Heemin Lee (Yonsei University); Joon Sang Lee (Yonsei University) |
| #597: Liquid-liquid mass transfer in miniature geometries using sudden expansion devices [Session S6; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Pushpender (Indian institute of technology Roorkee); Sumana Ghosh (Indian institute of technology Roorkee) |
| #604: Investigation of aerodynamic weber number effect on atomization and evaporation processes in crossflow [Session S12; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Kenya Kitada (Kyoto University); Abhishek Lakshman Pillai (Kyoto University); Ryoichi Kurose (Kyoto University) |
| #625: Two-layer Rayleigh-bènard with evaporation: interface temperature and Nusselt number [Session S11; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Nicolo Scapin (KTH); Andreas Demou (The Cyprus Institute, Nicosia); Luca Brandt (Norwegian University of Science of Technology, Department of Energy and Process Engineering Faculty of Engineering) |
| #657: Numerical simulation of droplets impacting onto hot metal surfaces with VoF method and phase change [Session S8; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Kaissar O Nabbout (Otto-von-Guericke-University Magdeburg); Martin Sommerfeld (Otto-von-Guericke University Magdeburg) |
| #673: Hydrodynamics and mass transfer of two-phase flow extraction of neodymium using ionic liquids in small channels. [Session S6; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Charlotte L Pheasey (UCL); Panaguiota Angeli (UCL) |
| #722: Thermal management of CBRN equipment using microchannels based heat sinks [Session S10; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Ana Sofia Oliveira H Moita (Academia Militar); Pedro Pontes (IST); Luis Quinto (CINAMIL - Academia Militar); Rui Lucena (CINAMIL - Academia Militar); Wilson Antunes (CINAMIL - Academia Militar); Luis Moreno (Academia Militar); Antonio Moreira (IN+ Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal.) |
| #741: Mass transfer at large Peclet number : study of a model three-phase flow. [Session S6; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Stéphane Zaleski (Sorbonne Université); Jacob Maarek (Sorbonne Université); Nelson Joubert (Sorbonne Université); Yash Kulkarni (Sorbonne Université); Stéphane Popinet (Sorbonne Université); Pascal Gardin (Arcelor-Mittal Research) |
| #760: 1D mixture model code for the modelization of two-phase flow thermosiphon [Session S11; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Pierre A Boyer (IMFT); Catherine Colin (IMFT); Thomas Prusek (EDF R&D) |
| #787: Experimental and numerical thermal-hydraulics study of a steam-droplets flow in a Venturi-type vertical tube with flow deviation - application to LOCA in pwr reactor [Session S8; Room 504, Topics: Multiphase Flow in Heat and Mass Transfer] |
Juan Esteban Luna Valencia (IRSN); Arthur V S Oliveira (USP); Alexandre Labergue (Université de Lorraine); Tony Glantz (IRSN); Michel Gradeck (Université de Lorraine) |
| #799: Investigating the mechanisms of hydrate deposition and agglomeration in multiphase flow conditions [Poster Session; Reception Hall] |
Daniela Marques (NUEM - UTFPR); Carlos Bassani (NUEM - UTFPR); Celina Kakitani Ofuchi (NUEM - UTFPR); Moises Marcelino Neto (NUEM - UTFPR); Amadeu K Sum (Colorado School of Mines); Rigoberto E. M. Morales (NUEM - UTFPR) |
| #90: The drag force on an oscillatory spherical bubble in power-law shear-thinning fluid [Poster Session; Reception Hall] |
Xianping Zhang (Osaka University); Kazuyasu Sugiyama (Osaka University); Tomoaki Watamura (Kyoto Institute of Technology) |
| #101: Thixotropic effects in oscillating droplets [Session S2; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Matthias Ibach (Institute of Aerospace Thermodynamics (ITLR), University of Stuttgart); Jonas Steigerwald (Institute of Aerospace Thermodynamics (ITLR), University of Stuttgart); Bernhard Weigand ( Institute of Aerospace Thermodynamics (ITLR), University of Stuttgart) |
| #128: Coalescence and breakup of droplets in a viscoelastic turbulent fluid [Session S3; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Ianto Cannon (Okinawa Institute of Science and Technology); Marco E. Rosti (Okinawa Institute of Science and Technology) |
| #165: Elasto-inertial migration of a neutrally buoyant spheroid in the viscoelastic channel flow [Session S1; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Yansong Li (Tsinghua University); Chunxiao Xu (Tsinghua University); Lihao Zhao (Tsinghua University) |
| #168: Energy spectrum scaling depends on the Re number in polymeric turbulence [Session S3; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Rahul Kumar Singh (Okinawa Institute of Science and Technology); Prasad Perlekar (Tata Institute of Fundamental Research); Dhrubaditya Mitra (KTH Royal Institute of Technology and Stockholm University); Marco E. Rosti (Okinawa Institute of Science and Technology) |
| #181: A conservative level set method for a rising gas bubble in a viscoelastic fluid [Session S2; Room 505, Topics: Non-Newtonian Multiphase Flows] |
William Doherty (Cardiff University); Timothy Phillips (Cardiff University); Zhihua Xie (Cardiff University) |
| #199: Numerical analysis of planar hydraulic jump in non-Newtonian thin film flow [Session S2; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Banashree Samanta (IIT Kharagpur); Gargi Das (IIT Kharagpur); Subhabrata Ray (IIT Kharagpur); Manish Kaushal (IIT KHARAGPUR) |
| #245: CFD analysis of a Taylor drop rising in co-current flow of non-Newtonian liquids [Session S2; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Revathi Sri E (IIT Madras); S Vengadesan (IIT Madras) |
| #246: Experimental study on pressure drop reduction in pipe line flow of C Heavy Oil by adding surfactant aqueous solution [Session S1; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Xiao Ma (National Institute of Maritime, Port and Aviation Technology); Isamu Fujita (National Institute of Maritime, Port and Aviation Technology); Masao Ono (National Institute of Maritime, Port and Aviation Technology) |
| #247: Numerical investigations of Newtonian/non-Newtonian liquid-liquid slug flow in microchannel [Session S4; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Deepak Vilayil (Indian Institute of Technology Madras); S Vengadesan (Indian Institute of Technology Madras) |
| #290: Interfacial instabilities during two-phase liquid displacement of pure viscoelastic liquid in microchannels [Session S4; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Seng Hoe Hue (Chemical Engineering, University College London); Loïc Chagot (University College London (UCL)); Panagiota P Angeli (UCL) |
| #295: Closed top draining of shear-thinning liquids in millichannels [Session S4; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Priyanka (IIT Kharagpur); Banashree Samanta (IIT Kharagpur); Gargi Das (IIT Kharagpur); Subhabrata Ray (BIT Mesra); Manish Kaushal (IIT Kharagpur) |
| #417: On viscoelastic bungee jet induced by impact [Session S1; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Kyota Kamamoto (Tokyo University of Agriculture and Technology); Hiroya Watanabe (Tokyo University of Agriculture and Technology); Asuka Hosokawa (Tokyo University of Agriculture and Technology); Yoshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
| #546: Numerical simulations of viscoelastic jets using the FENE-P model [Session S1; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Konstantinos Zinelis (Imperial College London); Thomas Abadie ( University of Birmingham); Jesse Capecelatro (University of Michigan); Gareth McKinley (Massachusetts Institute of Technology); Omar Matar (Imperial College London) |
| #576: Phase diagram of bungee-type behavior of impulsively-induced viscoelastic liquid jets [Poster Session; Reception Hall] |
Asuka Hosokawa (Tokyo University of Agriculture and Technology); Hiroya Watanabe (Tokyo University of Agriculture and Technology); Kyota Kamamoto (Tokyo University of Agriculture and Technology); Hiroaki Kusuno (Tokyo University of Agriculture and Technology); Kazuya U. Kobayashi (Nippon Institute of Technology); Toshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
| #652: Turbulence modulation in elastoviscoplastic fluid flows [Session S3; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Mohamed S Abdelgawad (Okinawa Institute of Science and Technology); Ianto Cannon (Okinawa Institute of Science and Technology); Marco Edoardo Rosti (Okinawa Institute of Science and Technology) |
| #663: The effect of absolute viscosity on the flow patterns and pressure gradient of gas - liquid-non-Newtonian two-phase flow in square microchannels [Session S4; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Deendarlianto Deendarlianto (Universitas Gadjah Mada); Haslinda Kusumaningsih (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada); indarto indarto (Universitas Gadjah Mada); Sugiyono Sugiyono (Universitas Gadjah Mada) |
| #729: Pseudo turbulence in viscoelastic fluids [Session S3; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Mithun Ravisankar (Brown University); Roberto Zenit (Brown University) |
| #765: An in-situ method for determining rheological properties of non-Newtonian fluids flowing in a circular cylinder by measuring pressure drop [Session S1; Room 505, Topics: Non-Newtonian Multiphase Flows] |
Nobuaki Ikeda (Graduate School of Keio University); Ayuri Kimoto (Graduate School of Keio University); Satoko Fujioka (Keio University); Koichi Terasaka (Keio University) |
| #820: Motion of droplet containing polymer on high temperature surface [Poster Session; Reception Hall] |
Hayato Masuda (Osaka Metropolitan University); Shinichiro Okumura (Osaka Metropolitan University); Koki Wada (Osaka Metropolitan University); Hiroyuki Iyota (Osaka Metropolitan University) |
| #846: Numerical simulation of shear-induced drop deformation and breakup in viscoelastic fluids [Poster Session; Reception Hall] |
Shunsuke Nakashima (Tokushima University); Mitsuhiro Ohta (Tokushima University); Mark Sussman (Florida State University) |
| #33: Towards modeling of soft deformable micro particles in dilute multiphase flow [Session S2; Room 301, Topics: Particle Dynamics] |
Jana Wedel (Friedrich-Alexander Universität Erlangen Nürnberg); Paul Steinmann (Friedrich-Alexander Universität Erlangen Nürnberg, University of Glasgow); Mitja Strakl(University of Maribor); Matjaz Hribersek (University of Maribor); Jure Ravnik (University of Maribor) |
| #37: Fall of a group of cylinders confined in a thin-gap cell filled with liquid at rest [Session S1; Room 301, Topics: Particle Dynamics] |
Dylan Letessier (Institut de mécanique des fluides de Toulouse (IMFT)); Patricia Ern (Institut de mécanique des fluides de Toulouse (IMFT)); Véronique Roig (Institut de mécanique des fluides de Toulouse (IMFT)) |
| #200: Beyond coffee ring like pattern [Session S2; Room 301, Topics: Particle Dynamics] |
Appurva Tiwari (Shiv Nadar Institute of Eminence); Sehyun Shin (Korea University); Seong Jae Lee (The University of Suwon); Ashish K Thokchom (Shiv Nadar Institute of Eminence) |
| #302: Second-order sensitivity matrix electrical impedance tomography (SSM-EIT) with cell-specialized electrical equivalent circuit(cEEC) method to reconstruct image of spatiotemporal transition of intra/extra-cellular ion concentrations [Session S1; Room 301, Topics: Particle Dynamics] |
Yiqun Tang (Chiba University); Songshi Li (Chiba University); Daisuke Kawashima (Chiba University); Masahiro Takei (Chiba University) |
| #480: Mechanical and fluid-transport properties of fiber networks – fundamental differences between dry and wet networks [Session S1; Room 301, Topics: Particle Dynamics] |
Per Bergström (Essity Hygiene and Health AB/Chalmers); Henrik Ström (Chalmers); Charlotta Hanson (Essity Hygiene and Health AB); Srdjan Sasic (Chalmers University of Technology) |
| #527: Influence of thermophoretic forces on the nanoparticle production via flame spray pyrolysis [Session S1; Room 301, Topics: Particle Dynamics] |
Pedro Bianchi Neto (UNICAMP); Lizoel Buss (University Bremen); Udo Fritsching (University Bremen); Dirceu Noriler (UNICAMP) |
| #602: Impact dynamics of a rigid sphere onto water: influence of surface wettability [Session S2; Room 301, Topics: Particle Dynamics] |
Prasanna Kumar Billa (IIT MADRAS); Tejaswi Josyula (Institute for Technical Thermodynamics, Technical University of Darmstadt); Pallab Sinha Mahapatra (Indian Institute of Technology, Madras) |
| #706: Population balance modeling of carbon black formation in flame spray pyrolysis reactors solved by the direct quadrature method of moments [Session S1; Room 301, Topics: Particle Dynamics] |
Fabio H Bastiani (UNICAMP); Pedro Bianchi Neto (UNICAMP); Udo Fritsching (University Bremen); Dirceu Noriler (UNICAMP) |
| #797: Towards numerical simulation of finite-sized moving particles in compressible flow [Session S2; Room 301, Topics: Particle Dynamics] |
Swagat K Nayak (Insitute for Hydromechanics, Karlsruhe Institute of Technology); Markus Uhlmann (Insitute for Hydromechanics, Karlsruhe Institute of Technology) |
| #42: Particle laden flow around an obstacle: wake instability and forces [Session S3; Room 301, Topics: Particle-Laden Flows] |
Eric Climent (IMFT); Dominik Schuster (IMFT); Ulrich Rude (Friedrich-Alexander Universität Erlangen Nürnberg) |
| #51: Phenomenology and modeling of bow shock perturbation in particle-gas flows [Session S5; Room 301, Topics: Particle-Laden Flows] |
Julien Amorosetti (CEA-CESTA); Jean-Philippe Braeunig (CEA-CESTA); David Hebert (CEA-CESTA) |
| #60: Stochastic Lagrangian and PDF Eulerian modelling of particles in multiphase flows [Session S6; Room 301, Topics: Particle-Laden Flows] |
Federico Baraglia (EDF); Jérôme Laviéville (EDF); Nicolas Mérigoux (EDF); Olivier Simonin (IMFT) |
| #81: Acoustic streaming in acoustic particle fractionation assisted by electric fields [Session S5; Room 301, Topics: Particle-Laden Flows] |
Krischan Sandmann (Leibniz Institute of Materials Engineering); Udo Fritsching (University Bremen) |
| #84: Two-phase flow simulations of gas-solid flow in a conical diffuser [Session S5; Room 301, Topics: Particle-Laden Flows] |
Aldo G Benavides-Moran (Universidad Nacional de Colombia); Brian Quintero (Universidad Autonoma de Occidente); Santiago Lain (Universidad Autonoma de Occidente) |
| #93: Effects of Stokes number on mono- and bi-disperse particle-laden Couette flows from particle-resolved direct numerical simulations [Session S12; Room 301, Topics: Particle-Laden Flows] |
Oliver Scorsim (Institut de Mécanique des Fluides de Toulouse (IMFT)); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)) |
| #95: How do the finite-sized particles modify the drag in Taylor-Couette turbulent flow [Session S10; Room 301, Topics: Particle-Laden Flows] |
Cheng Wang (Tsinghua University); Lei Yi (Tsinghua University); Linfeng Jiang (Tsinghua University); Chao Sun (Tsinghua University) |
| #103: The effect of inertia and distribution of particles in turbulent fluid flow [Session S9; Room 301, Topics: Particle-Laden Flows] |
Yoichi Mito (Kitami Institute of Technology) |
| #130: A stochastic Lagrangian subgrid-scale model for capturing two-point statistics [Session S6; Room 301, Topics: Particle-Laden Flows] |
Max P Herzog (University of Michigan); John Wakefield (University of Michigan); Jesse Capecelatro (University of Michigan) |
| #147: Euler-Euler simulation of co-current solid-liquid flow in a vertical pipe [Session S5; Room 301, Topics: Particle-Laden Flows] |
Mazen Draw (Helmholtz-Zentrum Dresden-Rossendorf e.V.); Roland Rzehak (Helmholtz-Zentrum Dresden-Rossendorf e.V.) |
| #160: Fiber kinematics in a turbulent channel flow [Session S11; Room 301, Topics: Particle-Laden Flows] |
Subhani Shaik (Technion - Israel Institute of Technology); Rene van Hout (Technion - Israel Institute of Technology) |
| #175: A new DNS-DEM model for the tribocharging of rough particles of the same material in turbulent channel flows [Session S9; Room 301, Topics: Particle-Laden Flows] |
Simon Jantac (PTB); Holger Grosshans (PTB) |
| #183: Numerical simulation of inertial ellipsoidal particles in a vertical gas-solid channel flow with inter-particle and particle-wall coliisions [Session S8; Room 301, Topics: Particle-Laden Flows] |
Karan Anand (Institut de Mécanique des Fluides de Toulouse); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)) |
| #188: Development of behavioural modification techniques through direct numerical simulation of agglomerating particle-laden turbulent pipe flows [Session S9; Room 301, Topics: Particle-Laden Flows] |
Bisrat Wolde (University of Leeds ); Lee F Mortimer (University of Leeds); Michael Fairweather (University of Leeds) |
| #196: Thin disks settling in quiescent and turbulent air [Session S10; Room 301, Topics: Particle-Laden Flows] |
Amy L Tinklenberg (University of Minnesota); Michele Guala (University of Minnesota, Twin Cities); Filippo Coletti (ETH Zurich) |
| #256: Influence of the Stokes number on electrostatic charging of particle-laden duct flows [Session S11; Room 301, Topics: Particle-Laden Flows] |
Wenchao Xu (Physikalisch-Technische Bundesanstalt); Manuella Mbami Reubo (Physikalisch-Technische Bundesanstalt); Holger Grosshans (Physikalisch-Technische Bundesanstalt) |
| #300: Experimental study of two-phase turbulent wake using PIV Technique [Poster Session; Reception Hall] |
Wei-Cheng Chen (National Cheng Kung University); Keh-Chin Chang (National Cheng Kung University) |
| #329: Turbulence modulation by inertial fibers [Session S4; Room 301, Topics: Particle-Laden Flows] |
Davide Di Giusto (University of Udine); Cristian Marchioli (University of Udine) |
| #338: The dynamics of particle clouds generated by a supersonic impinging jet [Session S11; Room 301, Topics: Particle-Laden Flows] |
Juan S Rubio (Johns Hopkins University); Miguel X Diaz-Lopez (Johns Hopkins University); Matthew T Gorman (Johns Hopkins University); Rui Ni (Johns Hopkins University) |
| #346: Analysis of ellipsoidal particle dynamics in anisotropic turbulent flow [Session S8; Room 301, Topics: Particle-Laden Flows] |
Thede Peter Kiwitt (RWTH Aachen University); Laurent André (RWTH Aachen University); Matthias Meinke (RWTH Aachen University); Wolfgang Schröder (RWTH Aachen University) |
| #351: Effect of non-spherical particle rotation on flow structure and flow resistance coefficients at moderate Reynolds numbers [Session S8; Room 301, Topics: Particle-Laden Flows] |
Santiago Lain (Universidad Autonoma de Occidente); Carlos Castang (Universidad Autonoma de Occidente); Diego Garcia (Universidad Autonoma de Occidente); Martin Sommerfeld (Otto-von-Guericke University Magdeburg) |
| #367: Settling of prolate spheroids in quiescent fluid at different volume fractions [Session S12; Room 301, Topics: Particle-Laden Flows] |
Xinyu Jiang (Tsinghua University); Chunxiao Xu (Tsinghua University); Lihao Zhao (Tsinghua University) |
| #389: Entrainment dynamics and modeling of a particle-laden plume [Session S12; Room 301, Topics: Particle-Laden Flows] |
Alec J Petersen (UC Irvine); Filippo Coletti (ETH Zurich) |
| #390: Interaction of puffs and particles in transitional particle-laden pipe flow [Session S12; Room 301, Topics: Particle-Laden Flows] |
Sagnik Paul (University of Minnesota, Twin Cities); Ellen Longmire (University of Minnesota) |
| #446: Settling velocity of inertial particles in turbulent flows. HIT and turbulent/non-turbulent interfaces. [Session S10; Room 301, Topics: Particle-Laden Flows] |
Amelie Ferran (University of Washington); Kee Onn Fong (university of Washington); Martin Obligado (LEGI-UGA); Alberto Aliseda (University of Washington) |
| #459: Analysis of turbulent pipe flow laden with low-inertia particles using the resolvent framework [Session S9; Room 301, Topics: Particle-Laden Flows] |
Rasmus K Schlander (Imperial College London); Stelios Rigopoulos (Imperial College London); George Papadakis (Imperial College London) |
| #465: Transient velocity correction in the volume-filtered Euler-Lagrange modeling of wall-bounded particle-laden flows [Session S6; Room 301, Topics: Particle-Laden Flows] |
Akshay Chandran (Otto-von-Guericke Universitaet); Fabien Evrard (Otto-von-Guericke University Magdeburg); Berend van Wachem (University of Magdeburg) |
| #514: Universal scaling of non-axisymmetric fibers tumbling rate in channel flow turbulence [Session S11; Room 301, Topics: Particle-Laden Flows] |
Mobin Alipour (Yale University); Marco De Paoli (TU Wien); Alfredo Soldati (TU Wien) |
| #519: Recent developments in a kinetic theory for gas-particle flows [Session S6; Room 301, Topics: Particle-Laden Flows] |
Christopher P Stafford (University of Brighton); David Swailes (Newcastle University); Michael W Reeks (Newcastle University) |
| #521: Interphase coupling in polydisperse evaporating sprays using the generalised fully Lagrangian approach [Session S6; Room 301, Topics: Particle-Laden Flows] |
Christopher P Stafford (University of Brighton); Oyuna Rybdylova (University of Brighton) |
| #533: Fluid mediated particle interactions studied using the nearest particle statistics [Session S12; Room 301, Topics: Particle-Laden Flows] |
Duan Z Zhang (Los Alamos National Laboratory); Min Wang (Los Alamos National Laboratory); Sivaramakrishnan Balachandar (University of Florida) |
| #555: Divergence and rotation of inertial particles in a four-way coupled channel flow [Session S7; Room 301, Topics: Particle-Laden Flows] |
Thibault Oujia (Institut de Mathématiques de Marseille, Aix-Marseille Université, CNRS); Jacob West (Department of Mechanical Engineering, Stanford University); Keigo Matsuda (Japan Agency for Marine-Earth Science and Technology); Kai Schneider (Institut de Mathématiques de Marseille, Aix-Marseille Université, CNRS); Suhas Jain (Center for Turbulence Research, Stanford University); Kazuki Maeda (Center for Turbulence Research, Stanford University,) |
| #561: Clustering formation of inertial particles in homogeneous isotropic turbulence [Session S4; Room 301, Topics: Particle-Laden Flows] |
Keigo Matsuda (Japan Agency for Marine-Earth Science and Technology); Thibault Oujia (Institut de Mathématiques de Marseille, Aix-Marseille Université, CNRS); Kai Schneider (Institut de Mathématiques de Marseille, Aix-Marseille Université, CNRS) |
| #564: Numerical analysis of aerosol capturing behavior in face masks obtained by X-ray CT [Poster Session; Reception Hall] |
Kodai Hada (Hiroshima University); Shirzadi Mohammadreza (Hiroshima University); Tomonori Fukasawa (Hiroshima University); Kunihiro Fukui (Hiroshima University); Toru Ishigami (Hiroshima University) |
| #573: Particle dynamics in the channel flow over two staggered rectangular obstacles [Session S7; Room 301, Topics: Particle-Laden Flows] |
Yeeun Kang (Seoul National University); Hyungmin Park (Seoul National University) |
| #574: Humidity effect on the particle-laden jet with crossflow [Session S7; Room 301, Topics: Particle-Laden Flows] |
Jooyeon Park (Seoul National University); Hyungmin Park (Seoul National University) |
| #601: Effect of particle size on inertial particle focusing in square duct flows [Poster Session; Reception Hall] |
Hiroshi Yamashita (Hiroshima University); Takeshi Akinaga (Akita University); Masako Sugihara-Seki (Kansai University) |
| #612: Experimental and numerical study of elongated non-spherical particles in near-wall regions [Session S3; Room 301, Topics: Particle-Laden Flows] |
Manuel A Taborda (Otto von Guericke University Magdeburg); Victor Chéron (Otto-von-Guericke Universität); Berend van Wachem (University of Magdeburg); Martin Sommerfeld (Otto-von-Guericke University Magdeburg) |
| #622: Interaction between solid particles and coherent structures in turbulent channel flow [Session S3; Room 301, Topics: Particle-Laden Flows] |
Yutaro Motoori (Osaka University); Susumu Goto (Osaka University) |
| #637: The vortex merger in dusty flow [Session S3; Room 301, Topics: Particle-Laden Flows] |
Shuai Shuai (Arizona State University); Houssem Kasbaoui (Arizona State University) |
| #692: Inertial particle dynamics in underexpanded jets [Session S7; Room 301, Topics: Particle-Laden Flows] |
Meet Patel (University of Michigan); Juan S Rubio (Johns Hopkins University); Rui Ni (Johns Hopkins University); Jason Rabinovitch (Stevens Institute of Technology); Jesse Capecelatro (University of Michigan) |
| #755: Numerical study of aerosol particles collection by falling drops [Session S4; Room 301, Topics: Particle-Laden Flows] |
Emmanuel Reyes (University of Rouen); Thibaut Ménard (University of Rouen); Pascal Lemaitre (IRSN); Emmanuel Belut (INRS) |
| #821: Dispersion and clustering of inertial particles in a turbulent round jet [Session S4; Room 301, Topics: Particle-Laden Flows] |
Bianca Viggiano (Polytechnique Montréal); Thomas Basset (Phys. Lab - CNRS); Romain Volk (Phys. Lab - CNRS); Laurent Chevillard (Phys. Lab - CNRS); Mickael Bourgoin (Phys. Lab - CNRS); Raúl B Cal (Portland State University) |
| #827: Decoupling turbulence from gravity in a particle-laden turbulent flow [Session S8; Room 301, Topics: Particle-Laden Flows] |
Facundo Cabrera (Portland State University); Karl Cardin (Portland State University); Laurent Chevillard (Phys. Lab - CNRS); Nicolas Plihon (Phys. Lab - CNRS); Mickael Bourgoin (Phys. Lab - CNRS); Raúl B Cal (Portland State University) |
| #835: The development of fully controlled homogeneous and isotropic turbulence water tank for particle-laden flow research [Poster Session; Reception Hall] |
Henghui Zhou (Guangdong Technion-Israel Institute of Technology); Baiyu Lu (Guangdong Technion-Israel Institute of Technology); Hongtao Qian (Guangdong Technion-Israel Institute of Technology); Biaosheng Luo (Guangdong Technion-Israel Institute of Technology); Cheng Li (Guangdong Technion- Israel Institute of Technology) |
| #841: Settling of spherical particles in an upward flow configuration in the dilute regime [Session S10; Room 301, Topics: Particle-Laden Flows] |
Manuel Moriche Guerrero (Karlsruhe Institute of Technology); Markus Uhlmann (Karlsruhe Institute of Technology) |
| #38: Cyclic reduction of combusted iron powder: study on the stability of material properties [Session S12; Room 403, Topics: Reactive Multiphase Flows] |
Nicole C Stevens (Eindhoven University of Technology); Giulia Finotello (TU/e); Niels G Deen (Eindhoven University of Technology) |
| #150: Direct numerical simulation of the evaporation-combustion interaction of fuel droplets in a turbulent flow [Session S10; Room 403, Topics: Reactive Multiphase Flows] |
Hippolyte R Cléris (ONERA); Jean-Luc Estivalezes (ONERA); Sebastien Tanguy (IMFT); Olivier Rouzaud (ONERA); Anna-Federica Urbano (ISAE-Supaero) |
| #291: CFD-DEM modeling of dynamic raceway in blast furnaces: effect of pulverized coal combustion on raceway formation [Session S10; Room 403, Topics: Reactive Multiphase Flows] |
Chih-Chia Huang (Eindhoven University of Technology); Jeroen van Oijen (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology) |
| #382: Effect of particle dispersion on particulate emissions in entrained flow reactors under acoustic excitation [Session S11; Room 403, Topics: Reactive Multiphase Flows] |
Marcelo Dal Belo Takehara (Luleå University of Technology); Kentaro Umeki (Luleå University of Technology); Rikard Gebart (Luleå University of Technology) |
| #470: Numerical simulation of marangoni convection near a hydrogen bubble growing on a microelectrode [Session S11; Room 403, Topics: Reactive Multiphase Flows] |
Aled M. Meulenbroek (Eindhoven University of Technology); Bas W.J. Bernts (Eindhoven University of Technology); Niels G. Deen (Eindhoven University of Technology); Albertus W. Vreman (Eindhoven University of Technology) |
| #485: Spray and flow trajectories in nanoparticle producing spray flames [Session S11; Room 403, Topics: Reactive Multiphase Flows] |
Malte F.B. Stodt (Leibniz-Institute for Materials Engineering, Technische Thermodynamik, Universität Bremen); Lizoel Buss (Leibniz-Institute for Materials Engineering); Johannes Kiefer (Technische Thermodynamik, Universität Bremen); Udo Fritsching (University Bremen) |
| #531: Intensifying gas-liquid photochemical reactions in microreactors with ultrasound [Session S11; Room 403, Topics: Reactive Multiphase Flows] |
Keiran Mc Carogher (KU Leuven); William Cailly (KU Leuven); Simon Kuhn (KU Leuven) |
| #686: Comparison of multicomponent diffusion models in single catalytic particles and packed bed reactors [Session S12; Room 403, Topics: Reactive Multiphase Flows] |
Claire M.Y. Claassen (Eindhoven University of Technology); Samaneh Tadayon Mousavi (Eindhoven University of Technology); Stan Wintjens (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Frank Peters (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
| #720: 3D numerical simulations of hydrogen combustion in fluidized beds [Session S10; Room 403, Topics: Reactive Multiphase Flows] |
Enrica Masi (Institut de Mécanique des Fluides de Toulouse); Ivan Girault (IMFT); Gaétan Pierre (EDF ); Benoit Bédat (Institut de Mécanique des Fluides de Toulouse); Amine Chadil (CNRS/MSME); Jerome Laviéville (EDF); Renaud Ansart (LGC); Hervé Neau (Institut de Mécanique des Fluides de Toulouse); Olivier Simonin (Institut de Mécanique des Fluides de Toulouse) |
| #739: An open-source computational framework for reactive solid-liquid flows [Session S12; Room 403, Topics: Reactive Multiphase Flows] |
Mohsen Shiea (Politecnico di Torino); Andrea Querio (Politecnico di Torino); Antonio Buffo (Politecnico di Torino); Gianluca Boccardo (Politecnico di Torino); Daniele Marchisio (Politecnico di Torino) |
| #779: Hydrogen combustion in an array of fixed inert particles [Session S10; Room 403, Topics: Reactive Multiphase Flows] |
Ivan Girault (IMFT); Amine Chadil (CNRS/MSME); Enrica Masi (Institut de Mécanique des Fluides de Toulouse); Stéphane Vincent (MSME - Université Gustave Eiffel); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)); Laurent Selle (IMFT) |
| #812: Full-cycle/multi-scale lithium-ion behavior mechanism in lithium-sulfur batteries [Session S11; Room 403, Topics: Reactive Multiphase Flows] |
Jae Yong Cho (Yonsei University MFDL); Se Young Kim (Yonsei University MFDL); Joon Sang Lee (Yonsei University MFDL) |
| #23: Air entrainment by plunging turbulent jets: impact of jet roughness revisited. [Session S9; Room 406, Topics: Turbulence in Multiphase Flows] |
Ivan Redor (UGA, CNRS, Grenoble-INP / LEGI); Gregory Guyot (EdF Renewable Energy); Martin Obligado (LEGI-UGA); Jean-Philippe Matas (Univ. Lyon); Alain H Cartellier (UGA, CNRS, Grenoble-INP / LEGI) |
| #61: Large-scale instabilities in two-fluid coaxial atomization with gas swirl [Session S9; Room 406, Topics: Turbulence in Multiphase Flows] |
Nathanael Machicoane (CNRS - LEGI); Oliver Tolfts (UGA - LEGI); Alexander Rack (ESRF) |
| #73: Simulations of viscoelastic turbulent jets at high Reynolds and Weissenberg numbers [Session S9; Room 406, Topics: Turbulence in Multiphase Flows] |
Marco Edoardo Rosti (Okinawa Institute of Science and Technology); Giovanni Soligo (Okinawa Institute of Science and Technology Graduate University) |
| #80: Dynamic behaviour of flexible filaments canopies in turbulent flows [Session S9; Room 406, Topics: Turbulence in Multiphase Flows] |
Giulio Foggi Rota (Okinawa Institute of Science and Technology (OIST)); Alessandro Monti (Okinawa Institute of Science and Technology (OIST)); Stefano Olivieri (Okinawa Institute of Science and Technology (OIST)); Marco Edoardo Rosti (Okinawa Institute of Science and Technology) |
| #126: Direct numerical simulation of droplet-laden homogeneous shear turbulence [Session S10; Room 406, Topics: Turbulence in Multiphase Flows] |
Pablo Trefftz-Posada (University of Washington, Seattle); Antonino Ferrante (University of Washington, Seattle) |
| #182: An enstrophy-based analysis of the characteristic length scales in interfacial turbulence [Session S7; Room 406, Topics: Turbulence in Multiphase Flows] |
Mahdi Saeedipour (Johannes Kepler University) |
| #191: Dispersion, collision, and coalescence of bubbles in turbulence [Session S8; Room 406, Topics: Turbulence in Multiphase Flows] |
Rui Ni (Johns Hopkins University); Shiyong Tan (Johns Hopkins University) |
| #266: Scale resolving simulations of wavy shear driven stratified gas-liquid flow in a horizontal channel [Session S11; Room 406, Topics: Turbulence in Multiphase Flows] |
Evgenia Korsukova (University of Nottingham); Stephen Ambrose (University of Nottingham); Luc Bertolotti (University of Nottingham); Richard Jefferson Loveday (University of Nottingham) |
| #274: An experimental study of particle pair dispersion in bubble-induced turbulence [Session S8; Room 406, Topics: Turbulence in Multiphase Flows] |
Tian Ma (Helmholtz-Zentrum Dresden - Rossendorf); Hendrik Hessenkemper (Helmholtz-Zentrum Dresden-Rossendorf); Anna Sommer (Helmholtz-Zentrum Dresden - Rossendorf); Kerstin Eckert (Helmholtz-Zentrum Dresden - Rossendorf); Shiyong Tan (Johns Hopkins University); Rui Ni (Johns Hopkins University); Andrew Bragg (Duke University) |
| #289: A new model for large eddy simulations of particle-laden turbulent flows [Session S10; Room 406, Topics: Turbulence in Multiphase Flows] |
Max Hausmann (Otto-von-Guericke University); Fabien Evrard (Otto-von-Guericke University Magdeburg); Berend van Wachem (University of Magdeburg) |
| #333: The near-wall and deposition dynamics of inertial particles in fully developed turbulent channel flow [Session S8; Room 406, Topics: Turbulence in Multiphase Flows] |
Miguel X Diaz-Lopez (Johns Hopkins University); Matthew T Gorman (Johns Hopkins University); Rui Ni (Johns Hopkins University) |
| #335: Charged particle dynamics in a vertical turbulence channel [Session S10; Room 406, Topics: Turbulence in Multiphase Flows] |
Matthew T Gorman (Johns Hopkins University); Miguel X Diaz-Lopez (Johns Hopkins University); Rui Ni (Johns Hopkins University) |
| #357: Flocculation of suspended cohesive particles in homogeneous isotropic turbulence [Session S8; Room 406, Topics: Turbulence in Multiphase Flows] |
Eckart Meiburg (UC Santa Barbara); Kunpeng Zhao (UCSB, Xi'an Jiaotong University); Bernhard Vowinckel (TU Braunschweig); Tom Hsu (U of Delaware); Bofeng Bai (Xi'an Jiaotong University) |
| #391: Simulation and modeling of turbulence induced by shock–particle interactions [Session S8; Room 406, Topics: Turbulence in Multiphase Flows] |
Archana Sridhar (University of Michigan); Jesse Capecelatro (University of Michigan) |
| #413: Influence of salt on bubbly drag reduction [Session S11; Room 406, Topics: Turbulence in Multiphase Flows] |
Luuk J. Blaauw (University of Twente); Detlef Lohse (Physics of Fluids Group, Max-Planck Center Twente for Complex Fluid Dynamics & JM Burgers Center, Department of Science and Technology, University of Twente); Sander Huisman (Universiteit Twente) |
| #444: Numerical simulation of turbulent multiphase flows with complex geometries [Session S7; Room 406, Topics: Turbulence in Multiphase Flows] |
Zhihua Xie (Cardiff University) |
| #520: Experimental study of the evolution of solitary slugs in a horizontal pipeline [Session S11; Room 406, Topics: Turbulence in Multiphase Flows] |
Vitor O. O. Machado (NUEM); Marco Conte (NUEM); Roel Belt (TOTAL Energies); Thierry Palermo (TOTAL Energies); Moisés Neto (NUEM); Rigoberto E. M. Morales (NUEM - UTFPR) |
| #534: Turbulent two-phase liquid-liquid flow inside a centrifugal pump impeller [Poster Session; Reception Hall] |
William Denner Pires Fonseca (UNICAMP); Rafael Franklin Lazaro Cerqueira (UNICAMP); Rodolfo M. Perissinotto (University of Campinas); William Monte Verde (Center for Petroleum Studies); Marcelo Souza Castro (UNICAMP); Antonio Carlos Bannwart (UNICAMP); Erick Franklin (UNICAMP) |
| #549: Particle transport along the non-wavy free surface of turbulent water [Session S10; Room 406, Topics: Turbulence in Multiphase Flows] |
Filippo Coletti (ETH Zurich); Roumaissa Hassaini (ETH Zurich); Yaxing Li (ETH Zurich); Kelken Chang (ETH Zurich); Claudio Mucignat (Empa) |
| #563: A dual-scale closure for large eddy simulation of phase interfaces in turbulent flows [Session S7; Room 406, Topics: Turbulence in Multiphase Flows] |
Dominic Kedelty (Arizona State University); Austin Goodrich (Arizona State University); Marcus Herrmann (Arizona State University) |
| #579: An inter-comparison study of flow modulation and wall drag in a turbulent channel flow laden with different dispersed phases [Session S11; Room 406, Topics: Turbulence in Multiphase Flows] |
Lian-Ping Wang (Southern University of Science and Technology); Yu Guo (Zhejiang University); Dingyi Pan (Zhejiang University); Zhenhua Xia (Zhejiang University); Peng Yu (Southern University of Science and Technology); Zhiqiang Dong (Southern University of Science and Technology); Jun Lai (Southern University of Science and Technology); Yang Li (Zhejiang University); Yi Liu (Zhejiang University); Kairzhan Karzhaubayev (Southern University of Science and Technology); Runyang Qiu (Zhejiang University); Chunhua Zhang (Southern University of Science and Technology); Zehua Zhang (Southern University of Science and Technology) |
| #693: Sampling scheme for wall shear stress in bubbly channel flow by variable-interval time-averaging method [Session S11; Room 406, Topics: Turbulence in Multiphase Flows] |
Yoshihiko Oishi (Muroran Institute of Technology); Hyun Jin Park (Hokkaido University); Yuichi Murai (Hokkaido University); Yuji Tasaka (Hokkaido University); Hideki Kawai (Muroran Institute of Technology) |
| #716: Direct numerical simulation of turbulent boundary layer flow over a permeable bed using continuum and pore-resolved approaches [Session S7; Room 406, Topics: Turbulence in Multiphase Flows] |
Shashank K Karra (Oregon State University); Sourabh V Apte (Oregon State University); Xiaoliang He (Pacific Northwest National Laboratory) |
| #850: Wall pressure measurements in slug flow [Session S11; Room 406, Topics: Turbulence in Multiphase Flows] |
Juliana R Cenzi (UNICAMP); Daniely das Neves (University of Brasília); Virgilio Cetano (University of Campinas); Adriano T. Fabro (Universidade de Brasília); Marcelo S Castro (UNICAMP) |
| #22: Influence of the operation conditions and the geometry on the gas entrainment in a sodium fast reactor mock-up [Session S1; Room 404, OS: Industrial Applications] |
David Guenadou (CEA); Philippe Aubert (CEA), Jean-Philippe Descamps (CEA) |
| #43: Experimental investigation of the transition between intermittent and annular two-phase flow through orifice plates [Session S1; Room 404, OS: Industrial Applications] |
Charlie Geest (UNICAMP); Marcelo S Castro (UNICAMP) |
| #154: Numerical modeling and simulation of transport and deposition of dust particles on ground mounted photovoltaic arrays [Session S4; Room 404, OS: Industrial Applications] |
Cheikhna Talebmoustaph (TotalEnergies); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)); Maxime Pallud (TotalEnergies); Priyank Maheshwari (TotalEnergies) |
| #174: Adsorption rate prediction of activated carbon packed bed using CFD [Session S2; Room 404, OS: Industrial Applications] |
Yuma Kasai (Shizuoka University); Yoshinori Jinbo (Shizuoka University); Hideya Kamikawa (Toclas Corporation); Toshiyuki Sanada (Shizuoka University) |
| #225: Device for applying an ophthalmic medicament mist [Session S1; Room 404, OS: Industrial Applications] |
Moshe Tshuva (Afeka, Tel-Aviv Academic College of Engineering); Joshua Altman (Afeka, Tel-Aviv Academic College of Engineering) |
| #243: Influence of a co-flow on the velocity field of a particle-laden jet issuing into a confined tube [Session S4; Room 404, OS: Industrial Applications] |
Elliott W Lewis (University of Adelaide); Zhiwei Sun (University of Adelaide); Matthew Gill (Calix Ltd.); Matthew Boot-Handford (Calix Ltd.); Mark Sceats (Calix Ltd.); Graham Nathan (University of Adelaide) |
| #283: Experimental investigation of the effect of stages number on electrical submersible pumps performance operating with two-phase gas-liquid flow [Poster Session; Reception Hall] |
Júlio Orssatto (UNICAMP); William Monte Verde (Center for Petroleum Studies); Yan Capellaro (UNICAMP); Rafael Cerqueira (UNICAMP); Jorge Biazussi (UNICAMP); Valdir Estevam (Center for Petroleum Studies); Marcelo S Castro (UNICAMP); Bernardo Foresti (PETROBRAS); Antonio Bannwart (Center for Petroleum Studies) |
| #334: Thermocatalytic decomposition of methane in a fluidized bed – experimental study of fluidization of growing catalyst particles [Session S4; Room 404, OS: Industrial Applications] |
Morteza Hadian (Eindhoven university of Technology); Danny Marrevee (Eindhoven university of Technology); Kay Buist (Eindhoven University of Technology); Bernard Reesink (BASF); Rene Bos (Shell); Sander van Bavel (Shell); Hans Kuipers (Eindhoven University of Technology) |
| #424: Numerical modelling of flow in alkaline water electrolysers [Session S2; Room 404, OS: Industrial Applications] |
Morgan Kerhouant (Imperial College London); Thomas Abadie (University of Birmingham); Raj Venuturumilli (bp); Andre Nicolle (bp); Omar Matar (Imperial College London) |
| #455: Modeling simulation assisted optimal process control for sandblasting operation [Session S4; Room 404, OS: Industrial Applications] |
Nguyen Van Bo (ASTAR); Si Bui Quang Tran (ASTAR); Henry Kou Feng Cheng (ASTAR); Ahluwalia Kunal(ASTAR); Chow Cher Wong(ASTAR); Victor Quek(ASTAR); Kterry Tan (ASTAR); ang Chang Wei (ASTAR) |
| #512: Scale-up investigations of a jet loop reactor for the implementation of a chemical process in an alternative reactor concept [Session S2; Room 404, OS: Industrial Applications] |
Marc Maly (Hamburg University of Technology); Rafael Kuwertz (Ehrfeld Mikrotechnik GmbH); Joachim Heck (Ehrfeld Mikrotechnik GmbH); Michael Schlüter (Hamburg University of Technology) |
| #551: Experimental study of plugging in a cohesive slurry of ice [Session S3; Room 404, OS: Industrial Applications] |
Boris V Balakin (Western Norway University of Applied Sciences); Pavel Struchalin (Western Norway University of Applied Sciences) |
| #611: Detection of solid-liquid phase changes of LiCl-KCl binary mixture by electrical impedance spectroscopy with platinum-wire electrode (pw-EIS) [Session S3; Room 404, OS: Industrial Applications] |
So Segawa (Chiba university); Yosephus A K Prayitno (Chiba University); Prima Sejati (Chiba university); Miku Arisato (Kyushu university); Noritaka Saito (Kyushu University); Masahiro Takei (Chiba University) |
| #681: Influence of hydrate-like particles on the horizontal three-phase solid-liquid-gas slug flow pattern [Session S1; Room 404, OS: Industrial Applications] |
Stella Cavalli (NUEM - UTFPR); Vitor O. O. Machado (NUEM); Gianluca Lavalle (Centre SPIN - Mines Saint-Etienne); Moisés Marcelino Neto (NUEM - UTFPR); Amadeu K Sum (Colorado School of Mines); Ana Cameirão (Centre SPIN - Mines Saint-Etienne); Rigoberto E. M. Morales (NUEM - UTFPR) |
| #725: Impact driven scalable liquid encapsulation: a new paradigm in encapsulation methods [Session S2; Room 404, OS: Industrial Applications] |
Sirshendu Misra (University of Waterloo); Kumari Trinavee (University of Waterloo); Naga Siva Gunda (University of Waterloo); Sushanta Mitra (University of Waterloo) |
| #738: Visualization of spatio-temporal void fraction of vertical gas-liquid two-phase flow by coupled multiple current-voltage with wire-mesh sensor and convolutional neural network (MCV-WMS-CNN) [Session S3; Room 404, OS: Industrial Applications] |
Yosephus A K Prayitno (Chiba University); Daisuke Saito (Chiba University); Shuichiro Miwa (The University of Tokyo); Masahiro TAKEI (Chiba University) |
| #740: Flow visualisation and flow patterns in a flat-plate polypropylene pulsating heat pipe [Session S3; Room 404, OS: Industrial Applications] |
Ali Alqahtani (University of Liverpool); Volfango Bertola (University of Liverpool) |
| #784: Wetting characterization of the liquid poured onto the square rod array [Poster Session; Reception Hall] |
Masayuki Kaneda (Osaka Metropolitan University); Zelin Li (Osaka Metropolitan University); Makoto Sugimoto (Tohoku University); Tatsuya Miyazaki (Osaka Metropolitan University); Keita Akune (Osaka Metropolitan University); Kazuhiko Suga (Osaka Metropolitan University) |
| #838: Investigation of spreading behavior with fragmentation of a wall-impinging liquid jet in a shallow pool [Session S1; Room 404, OS: Industrial Applications] |
Naoki Horiguchi (Japan Atomic Energy Agency); Hiroyuki Yoshida (Japan Atomic Energy Agency); Akiko Kaneko (University of Tsukuba); Yutaka Abe (University of Tsukuba) |
| #839: Experimental study and prediction of the flow reversal in inclined pipes [Poster Session; Reception Hall] |
Lisong Wang (Institute of Mechanics, Chinese Academy of Sciences); Shuo Liu (Institute of mechanics, Chinese Academy of Sciences); Lintong Hou (Institute of Mechanics, Chinese Academy of Sciences); Meng Yang (Institute of Mechanics, Chinese Academy of Sciences (CAS)); Yanhuan Zhang (Insititute of Mechanics,Chinese Academy of Sciences,Beijing); Jingyu Xu (Institute of Mechanics, Chinese Academy of Sciences) |
| #24: Numerical study of conjugate heat transfer effects on two-phase cooling with multi-microchannels heat sinks [Session S6; Room 502, OS: Boiling, Condensation, Evaporation] |
Federico Municchi (Colorado School of Mines); Ismail El Mellas (University of Nottingham); Omar Matar (Imperial College London); Mirco Magnini (University of Nottingham) |
| #41: Two-phase frictional pressure drop at high saturation temperatures in a horizontal micro-scale channel [Session S6; Room 502, OS: Boiling, Condensation, Evaporation] |
Daniel Borba Marchetto (University of Sao Paulo); Rémi Revellin (INSA Lyon); Romuald Rulliere (University of Sao Paulo); Gherhardt Ribatski (University of Sao Paulo) |
| #112: High humidity enhances the evaporation of non-aqueous volatile sprays [Session S1; Room 502, OS: Boiling, Condensation, Evaporation] |
Sander Huisman (Universiteit Twente); Morgan (Mogeng) Li (Physics of Fluids Group, University of Twente); Detlef Lohse (Physics of Fluids Group, Max-Planck Center Twente for Complex Fluid Dynamics & JM Burgers Center, Department of Science and Technology, University of Twente) |
| #121: Towards modeling the impact of the aspect ratio in an energy model describing the transient flow boiling crisis at high subcooling [Session S4; Room 502, OS: Boiling, Condensation, Evaporation] |
Elie Roumet (CEA); Raksmy Nop (CEA); Nicolas Dorville (CEA); Marie-Christine Duluc (CNAM) |
| #156: Towards a fully physics-based 1D CFD model for the depressurization of pipes with liquid-gas phase change [Session S4; Room 502, OS: Boiling, Condensation, Evaporation] |
Alexandra M Log (NTNU); Morten Hammer (SINTEF Energy Research); Svend Tollak Munkejord (SINTEF Energy Research) |
| #158: Simulation of droplet sizes for flashing sprays with an extended ELSA model [Session S1; Room 502, OS: Boiling, Condensation, Evaporation] |
Jan Wilhelm Gärtner (Institute for Combustion Technology); Andreas Kronenburg (Institute for Combustion Technology) |
| #177: Nucleation patterning on reduced graphene oxide-coated micropillar surface for enhanced boiling heat transfer [Poster Session; Reception Hall] |
Maroosol Yun (Yonsei University); Geehong Choi (Yonsei University); Dong Il Shim (Yonsei University); Donghwi Lee (Jeonbuk Nat'l University); Beom Seok Kim (Seoul Nat'l University of Science and Technology); Hyung Hee Cho (Yonsei University) |
| #204: CHF enhancement by wickability of micro-pillar structured surfaces [Session S9; Room 502, OS: Boiling, Condensation, Evaporation] |
Hyeon Taek Nam (Jeonbuk National University); Donghwi Lee (Jeonbuk National University); Seungro Lee (Jeonbuk National University) |
| #240: Liquid nitrogen quenching of copper surface with porous structure [Session S8; Room 502, OS: Boiling, Condensation, Evaporation] |
Yutaro Umehara (Kyushu University); Rintaro Sadaishi (Kyushu University); Shoji Mori (Kyushu University) |
| #244: Dimensional and experimental analysis of flashing flow through simple orifices [Session S1; Room 502, OS: Boiling, Condensation, Evaporation] |
Ali Vakil (Coanda Research and Development); Mohammad Shariati (Coanda Research and Development); Konstantin Pougatch (Coanda Research and Development) |
| #339: Drop-wise condensation for deterministic micro/nano surface patterning [Session S9; Room 502, OS: Boiling, Condensation, Evaporation] |
Francis Dent (Univeristy of Leeds); Sepideh Khodaparast (University of Leeds) |
| #343: On the onset of transcritical phase transition: an analytical approach using a non-equilibrium evaporation model [Session S3; Room 502, OS: Boiling, Condensation, Evaporation] |
Christoph Steinhausen (Institute of Aerospace Thermodynamics); Anton Schaumäker (Institute of Aerospace Thermodynamics); Bernhard Weigand (Institute of Aerospace Thermodynamics); Grazia Lamanna (Institute of Aerospace Thermodynamics); Andreas Preusche (Reactive Flows and Diagnostics); Andreas Dreizler (Reactive Flows and Diagnostics) |
| #370: Capillary fluctuating hydrodynamics description of the boiling phenomenon [Session S3; Room 502, OS: Boiling, Condensation, Evaporation] |
Mirko Gallo (University of Brighton); Francesco Magaletti (University of Brighton); Anastasios Georgoulas (University of Brighton); Marco Marengo (University of Brighton); Joel De Coninck (University of Brighton); Carlo Massimo Casciola (Sapienza University of Rome) |
| #381: Validation of Eulerian two-phase flow module in SNERDI computational fluid dynamics software (SCFD) for nuclear power engineering [Session S5; Room 502, OS: Boiling, Condensation, Evaporation] |
Chang Sun (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd); Haoran Hao (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd); Dongsheng Zhang (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd); Bing Ren (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd); Fujun Gan (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd); Yanrong Shen (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd); Qian Hong (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd); Bo Yang (Shanghai Nuclear Engineering Research and Design Institute Co.Ltd) |
| #392: Liquid microlayer formation beneath a vapour bubble growing at a heated substrate: interface-capturing CFD simulations and fluorescence microscopy experiments [Session S5; Room 502, OS: Boiling, Condensation, Evaporation] |
Giovanni Giustini (The University of Manchester); Suryanarayan Lakshminarayan (Imperial College London); Aleksei Lobasov (Imperial College London); Konstantin S. Pervunin (Imperial College London); Christos Markides (Imperial College London) |
| #412: Critical heat flux and bubble behavior analysis on tube bundles during pool boiling [Session S7; Room 502, OS: Boiling, Condensation, Evaporation] |
Bikash Pattanayak (Indian Institute of Technology Jodhpur); Manoj Kothari (Indian Institute of Technology Jodhpur); Hardik Kothadia (Indian Institute of Technology Jodhpur ) |
| #454: Identification of boiling regimes through boiling induced vibrations using decision tree classifier [Session S4; Room 502, OS: Boiling, Condensation, Evaporation] |
Venkata Sreeram Sarma Barathula (Indian Institute of Technology Madras); S K Chaitanya (Indian Institute of Technology Madras); K Srinivasan (Indian Institute of Technology Madras) |
| #479: An experimental characterization of the gravity-driven flashing of superheated water in a pool-type geometry [Session S1; Room 502, OS: Boiling, Condensation, Evaporation] |
Jimmy Martin (IRSN); Pierre RUYER (IRSN); Matthieu Duponcheel (Université Catholique de Louvain); Yann Bartosiewicz (Université Catholique de Louvain) |
| #487: Flow boiling in a vertically oriented miniaturised square channel: from visual observations to laser-based measurements [Session S3; Room 502, OS: Boiling, Condensation, Evaporation] |
Zengchao Chen (Imperial College London); Suryanarayan Lakshminarayan (Imperial College London); Aleksei Lobasov (Imperial College London); Konstantin S. Pervunin (Imperial College London); Christos Markides (Imperial College London) |
| #511: Dynamics of forced flow boiling ebullition cycles at natural and artificial cavities [Session S2; Room 502, OS: Boiling, Condensation, Evaporation] |
Dapeng Yang (Imperial college london); Antonis Sergis (Imperial college london); Yannis Hardalupas (Imperial college london) |
| #538: Experimental insights of the enhancement of the liquid heat transfer during nucleate boiling [Session S9; Room 502, OS: Boiling, Condensation, Evaporation] |
Gustavo Matana Aguiar (Massachusetts Institute of Technology); Bren Phillips (Massachusetts Institute of Technology); Matteo Bucci (Massachusetts Institute of Technology) |
| #572: Observations of heterogeneous nucleation phenomena in saturated liquid nitrogen [Session S3; Room 502, OS: Boiling, Condensation, Evaporation] |
Florian Chavagnat (Massachusetts Institute of Technology); Bren Phillips (Massachusetts Institute of Technology); Jason Hartwig (NASA); Matteo Bucci (Massachusetts Institute of Technology); Emilio Baglietto (Massachusetts Institute of Technology) |
| #607: Finite-size evaporation droplets in weakly compressible homogeneous turbulence with droplet-resolved DNS [Session S5; Room 502, OS: Boiling, Condensation, Evaporation] |
Salar Zamani Salimi (Norwegian University of Science and Technology); Nicolo Scapin (KTH University); Andrea Gruber (SINTEF Energy Research); Luca Brandt (KTH university) |
| #608: Boiling heat transfer characteristics of magnetic nanofluids under magnetic field [Session S7; Room 502, OS: Boiling, Condensation, Evaporation] |
Shun Ito (Kobe University); Shuhei Kumano (Kobe University); Hideki Murakawa (Kobe University); Katsumi Sugimoto (Kobe University) |
| #646: The effect of liquid height on the pool boiling critical heat flux of water at atmospheric pressure [Session S7; Room 502, OS: Boiling, Condensation, Evaporation] |
Rodrigo Cavalcanti Alvarez (Massachusetts Institute of Technology); Gustavo Matana Aguiar (Massachusetts Institute of Technology); Matteo Bucci (Massachusetts Institute of Technology) |
| #653: Application of liquid film sensor using an optical waveguide film to steam-water two-phase flow in a vertical condensation tube [Session S7; Room 502, OS: Boiling, Condensation, Evaporation] |
Hajime Furuichi (Hitachi, Ltd); Kosuke Nakano (Shizuoka University); Yujiro Teramoto (Shizuoka University); Yuki Mizushima (Shizuoka University); Toshiyuki Sanada (Shizuoka University) |
| #655: Numerical analysis of the break-up behavior of homogeneous droplet by puffing [Session S5; Room 502, OS: Boiling, Condensation, Evaporation] |
Fumiya Kidena (Kyoto university); Kenya Kitada (Kyoto University); Abhishek L. Pillai (Kyoto university); Ryoichi Kurose (Kyoto university) |
| #662: Evaluation of condensation models on TOPFLOW experiment [Session S4; Room 502, OS: Boiling, Condensation, Evaporation] |
Tanguy Herry (Commissariat à l'énergie atomique); Bruno Raverdy (Commissariat à l'énergie atomique); Stephane Mimouni (Electricite de France) |
| #665: R448A evaporation heat transfer coefficient inside multiport mini-channel tubes: experimental study and assessment of correlation [Session S6; Room 502, OS: Boiling, Condensation, Evaporation] |
Hieu Ngoc Hoang (Chonnam National University); Nurlaily Agustiarini (Chonnam National University); Jong-Taek Oh (Chonnam National University); Chien Nguyen Ba (Hanoi University of Science and Technology) |
| #684: Machine learning model to the prediction of heat transfer coefficient of refrigerants inside a multiport mini-channel tube [Poster Session; Reception Hall] |
Nurlaily Agustiarini (Chonnam National University); Hieu Ngoc Hoang (Chonnam National University); Jong-kyu Kim (Chonnam National University); Jong-taek Oh (Chonnam National University) |
| #709: Vaporization at high reduced pressure induced by very rapid power input [Session S7; Room 502, OS: Boiling, Condensation, Evaporation] |
Jean Muller (von Karman Institute (VKI)); Pierre Ruyer (IRSN); Romuald Rullière (Univ. Lyon, CNRS, INSA Lyon, CETHIL, UMR5008); Marc Clausse (Univ. Lyon, CNRS, INSA Lyon, CETHIL, UMR5008) |
| #731: Multiphase-CFD simulation of steam chugging by the volume of fluid method [Session S5; Room 502, OS: Boiling, Condensation, Evaporation] |
Marco Pellegrini (The University of Tokyo); Shuichiro Miwa (The University of Tokyo); Shunichi Suzuki (The University of Tokyo); Koji Okamoto (The University of Tokyo) |
| #736: Experimental investigation of inverted annular film boiling characteristics near the atmospheric pressure [Session S2; Room 502, OS: Boiling, Condensation, Evaporation] |
Kyung Mo Kim (University of Michigan); Adam Burak (University of Michigan); Joseph Kelly (The U.S. Nuclear Regulatory Commission); Stephen Bajorek (The U.S. Nuclear Regulatory Commission); Xiaodong Sun (University of Michigan) |
| #747: Heat transfer and flow characteristics of falling film evaporation with nucleate boiling on an inclined plate [Session S2; Room 502, OS: Boiling, Condensation, Evaporation] |
Tsutomu Ubara (Kobe University); Keisuke Hirai (Kobe University); Katsumi Sugimoto (Kobe University); Hitoshi Asano (Kobe University) |
| #751: Flow behaviors and void fraction distribution in mini-channel cross-flow vaporizer [Session S6; Room 502, OS: Boiling, Condensation, Evaporation] |
Keita Kiyohara (Kobe University); Hideki Murakawa (Kobe University); Katsumi Sugimoto (Kobe University); Yohei Kubo (Kobe Steel, Ltd); Keisuke Kurita (Japan Atomic Energy Agency); Hiroshi Iikura ( Japan Atomic Energy Agency); Hitoshi Asano (Kobe University) |
| #769: Effect of oscillation on the performance of a pulsating heat pipe (PHP) [Session S8; Room 502, OS: Boiling, Condensation, Evaporation] |
Lakshmanan Swaminathan (Indian Institute of Technology Madras); Shyama Prasad Das (Indian Institute of Technology Madras) |
| #783: CHF enhancement on micro/nano hybrid structure under acoustic actuation [Session S9; Room 502, OS: Boiling, Condensation, Evaporation] |
Donghwi Lee (Jeonbuk National University); Namkyu Lee (Forschungszentrum Jülich GmbH); Hsu Wei-Ting (Yonsei University); Dong Il Shim (Yonsei University); Maroosol Yun (Yonsei University); Hyung Hee Cho (Yonsei University) |
| #810: Effects of the ITO glass on the critical heat flux and boiling phenomena in a downward-faced flow boiling [Session S2; Room 502, OS: Boiling, Condensation, Evaporation] |
Zhenhan Hong (The University of Tokyo); Shuichiro Miwa (The University of Tokyo); Kai Wang (The University of Tokyo); Taishan Chen (The University of Tokyo); Koji Okamoto (The University of Tokyo) |
| #852: Flow boiling of R1336mzz(Z) in a copper microgap with tapered manifold [Session S8; Room 502, OS: Boiling, Condensation, Evaporation] |
Debora C Moreira (EESC/USP); Valter Nascimento Jr (EESC/USP); Satish G Kandlikar (Rochester Institute of Technology); Gherhardt Ribatski (USP) |
| #205: An experimental study of slug behavior in 2D gas-solid tapered fluidized beds [Session S8; Room 404, OS: Fluidization] |
Lipak Sahoo (Indian Institute of Technology Madras); Sabita Sarkar (Indian Institute of Technology Madras) |
| #269: Prediction of high temperature minimum fluidization of cohesive metallic particles [Session S8; Room 404, OS: Fluidization] |
Conrad Hessels (Eindhoven University of Technology); Giulia Finotello (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology); Tess Homan (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology) |
| #278: Modeling a fluidized bed of growing catalyst particles: coupling CFD-DEM with MGM [Session S6; Room 404, OS: Fluidization] |
Morteza Hadian (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
| #287: Numerical modeling of induction heating fluidized-bed reactor for hydrogen production using methane pyrolysis [Session S7; Room 404, OS: Fluidization] |
Mino Woo (Korea Institute of Industrial Technology); Gyeong-min Kim (Korea Institute of Industrial Technology); Yoon-ho Bae (Pusan National University); Dong-ha Lim (Korea Institute of Industrial Technology) |
| #353: A comprehensive assessment of the effect of the collision parameters on the hydrodynamics of a pseudo-2D fluidized bed [Session S7; Room 404, OS: Fluidization] |
Mohsen Zarepour (University of Saskatchewan); Donald J. Bergstrom (University of Saskatchewan); L. Zhang (University of Saskatchewan); Raymond J. Spiteri (University of Saskatchewan) |
| #376: CFD-DEM simulation of continuous particle drying in a countercurrent fluidized bed fitted with large hole perforated plates [Session S6; Room 404, OS: Fluidization] |
Kuang-Sin Pan (National Taiwan University); An-Ni Huang (Chang Gung University); Wan-Yi Hsu (Chang Gung University); Hsiu-Po Kuo (National Taiwan University) |
| #464: On the modeling of the subgrid-scale production of uncorrelated random particle kinetic energy in coarse grid two-fluid model simulations of gas-solid flows [Session S7; Room 404, OS: Fluidization] |
Baptiste Hardy (Institut de Mécanique des Fluides de Toulouse); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)) |
| #489: Coarse graining strategy for DEM modelling of triboelectric charging in circulating fluidized bed riser [Session S6; Room 404, OS: Fluidization] |
Erasmo Salvatore Napolitano (University of Calabria); Alberto Di Renzo (University of Calabria); Francesco Paolo Di Maio (University of Calabria) |
| #495: Investigating the (de-)fluidization behavior of combusted iron fines in a fluidized bed using coupled CFD-DEM [Session S6; Room 404, OS: Fluidization] |
Xin Liu (Power and Flow, Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology) |
| #591: Mixing/segregation behaviors for density difference of binary particles in a vibro-fluidized bed [Session S8; Room 404, OS: Fluidization] |
Yoshihide Mawatari (Kyushu Institute of Technology); Naoki Iwamura (Kyushu Institute of Technology) |
| #626: Evaluation of attrition and fragmentation tendency of limestone-based sorbents for sorption-enhanced gasification in dual interconnected fluidized bed reactors [Session S8; Room 404, OS: Fluidization] |
Antonio Coppola (STEMS-CNR); Fabio Montagnaro (University Federico II of Naples); Fabrizio Scala (University Federico II of Naples) |
| #627: Effect of powder head on horizontal conveying of fluidized powder [Poster Session; Reception Hall] |
Kiyoshiro Inami (National Institute of Technology, Oita College); Koichiro Ogata (National Institute of technology, Oita College) |
| #713: Cylindrical particles behavior in a liquid/solid fluidized bed [Session S8; Room 404, OS: Fluidization] |
Kamel Landal Otmani (IFP Energies nouvelles); Rim Brahem (IFP Energies nouvelles); Elise Almeras (IFP Energies nouvelles) |
| #721: Second and third moments of liquid and solid phase velocity distributions in homogeneously fluidized inertial suspensions [Session S7; Room 404, OS: Fluidization] |
Elise Almeras (IFP Energies nouvelles); Olivier Masbernat (Laboratoire de Génie Chimique); Frédéric Risso (Institut de mécanique des Fluides de Toulouse); Rodney O. Fox (Iowa State University) |
| #775: Density segregation of granular materials in vibrated gas-fluidized bed (influence of gas inflow and vibration conditions) [Session S6; Room 404, OS: Fluidization] |
Takuya Tsuji (Osaka University); Yuu Nogami (Osaka University); Jiang Zhaohua (Osaka University); Jun Oshitani (Okayama University of Science); Kimiaki Washino (Osaka University); Toshitsugu Tanaka (Osaka University) |
| #825: Modelling of pseudo-turbulence and fluid turbulence modulation in liquid-solid fluidized bed by using Rij-epsilon SSG turbulence model [Session S7; Room 404, OS: Fluidization] |
Almir GSL Ritta (Institut National Polytechnique de Toulouse); Renaud Ansart (Institut National Polytechnique de Toulouse); Olivier Simonin (Institut National Polytechnique de Toulouse) |
| #379: Numerical analysis of hysteresis of granular flow on an inclined plane [Session S11; Room 502, OS: Granular Flow] |
Clovis Lambert (IMFT); Raphaël Maurin (Institut de Mécanique des Fluides de Toulouse (IMFT)); Marcan Graffin (Université de Toulouse); Laurent Lacaze (Institut de Mécanique des Fluides de Toulouse (IMFT)); Sylvain Viroulet (Institut de Mécanique des Fluides de Toulouse (IMFT)); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)) |
| #407: Mechanical properties of hierarchical granular matter [Session S10; Room 502, OS: Granular Flow] |
Hiroaki Katsuragi (Osaka University); Fumiaki Okubo (Nagoya University); Tomomi Omura (Osaka Sangyo University) |
| #468: Influence of capillary forces on non-Local granular fluidity [Session S11; Room 502, OS: Granular Flow] |
Dorian Faroux (Osaka University); Kimiaki Washino (Osaka University); Takuya Tsuji (Osaka University); Toshitsugu Tanaka (Osaka University) |
| #474: Rheology of a polymer-coated granular material [Session S10; Room 502, OS: Granular Flow] |
Franco Tapia (Tokyo Univ); Adrien Gans (Univ. Lorraine); Olivier Pouliquen (Aix-Marseille Univ); Maxime Nicolas (Aix-Marseille Univ) |
| #475: Slipping and friction of a sphere rolling up a granular slope [Poster Session; Reception Hall] |
Takeshi Fukumoto (Osaka University); Ken Yamamoto (Osaka University); Makoto Katsura (Osaka University); Hiroaki Katsuragi (Osaka University) |
| #584: The effect of asymmetry and pressure balance in granular capillary phenomena [Poster Session; Reception Hall] |
Yuki Yamamoto (Osaka University); Ken Yamamoto (Osaka University); Makoto Katsura (Osaka University); Hiroaki Katsuragi (Osaka University) |
| #633: Effect of liquid bridge forces on the dynamic flow of particles [Poster Session; Reception Hall] |
Yuma Hirose (National Institute of Technology, Oita College); Shunta Tsukuma (National Institute of Technology, Oita College); Koichiro Ogata (National Institute of technology, Oita College); Kimiaki Washino (Osaka University) |
| #634: Relation between bidispersivity and ordered structure in a compressed two-dimensional magnet-particle system [Poster Session; Reception Hall] |
Kazuki Tsuchikusa (Osaka University); Ken Yamamoto (Osaka University); Makoto Katsura (Osaka University); Hiroaki Katsuragi (Osaka University) |
| #658: Jamming in plane Poiseuille flow of granular materials [Session S11; Room 502, OS: Granular Flow] |
Kenta Hayashi (Osaka University); Kiwamu Yoshii (Osaka University); Michio Otsuki (Osaka University) |
| #817: Evaluation of flowability and cohesiveness for cohesive particles of different particle properties using powder discharge test [Session S10; Room 502, OS: Granular Flow] |
Koichiro Ogata (National Institute of technology, Oita College); Shunta Tsukuma (National Institute of Technology, Oita College); Yuma Hirose (National Institute of Technology, Oita College) |
| #844: Flowability behaviour and rheological investigations of dry volcanic material responsible of the generation of volcaniclastic debris flows. [Session S10; Room 502, OS: Granular Flow] |
Ilaria Rucco (Heriot-Watt University); Ivan Marchante Gracia (Heriot-Watt University); Fabio Dioguardi (Università degli Studi di Bari “Aldo Moro”); Chongqiang Zhu (Heriot-Watt University); Raffaella Ocone (Heriot-Watt University) |
| #871: CFD study of co-injection of hydrogen and coal in a blast furnace [Session S11; Room 502, OS: Granular Flow] |
Yiran Liu (University of New South Wales); Yansong Shen (University of New South Wales) |
| #872: CFD-DEM modeling of gas-solid reacting flow (rCFD-DEM): from new approaches to industry applications [Session S11; Room 502, OS: Granular Flow] |
Yansong Shen (University of New South Wales) |
| #77: Large eddy simulation of dune evolution by wind erosion, sand transport and depositon [Session S1; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Jian Zhao Wu (LMFA, ECL); Catherine Le Ribault (LMFA, ECL, CNRS); Ivana Vinkovic (LMFA, ECL, UCB Lyon1); Serge Simoëns (LMFA, ECL, CNRS) |
| #78: On the modeling of RANS turbulent and LES subgrid fluid-particle drift velocity in dilute and moderately dense dispersed two-phase flows [Session S6; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)); Baptiste Hardy (Institut de Mecanique des Fluides de Toulouse (IMFT)); Pascal Fede (Institut de Mecanique des Fluides de Toulouse (IMFT)) |
| #92: Turbulence effect on clustering in bubble swarms using DNS and front-tracking [Session S4; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Alan Burlot (CEA Paris-Saclay); Gabriel Ramirez (CEA Paris-Saclay); Frédéric Risso (CNRS-IMFT); Guillaume Bois (CEA Paris-Saclay); Rémi Zamansky (IMFT) |
| #113: Numerical simulation of rigid particles in Stokes flow: lubrication correction, including fluid correction, for general shape of particles [Session S1; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Aline Lefebvre-Lepot (CMAP, CNRS, Ecole Polytechnique, I.P. Paris); Flore Nabet (CMAP, Ecole Polytechnique, I.P. Paris) |
| #162: Modelling the internal and external flow conditions of an air-core-liquid-ring (ACLR) atomizer using a coupled Eulerian-Lagrangian approach [Session S3; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Miguel Ballesteros (Institute of Process Engineering in Life Sciences, Food Process Engineering, Karlsruhe Institute of Technology); Deisy Becerra (Institute of Process Engineering in Life Sciences, Food Process Engineering, Karlsruhe Institute of Technology); Volker Gaukel (Institute of Process Engineering in Life Sciences, Food Process Engineering, Karlsruhe Institute of Technology) |
| #212: One-way analysis for sediment transport process near riverbed based on a grid-averaged Lagrangian model [Session S1; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Takashi Inoue (Tokyo University of Science); Jin Kashiwada (Tokyo University of Science); Yasuo Nihei (Tokyo University of Science) |
| #276: Robust conservative Allen-Cahn lattice Boltzmann model for multi-phase flow simulations [Session S5; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Seyed Ali Hosseini (OvGU); Dominique Thévenin (OvGU) |
| #296: Simulation of particle dynamics in mechanofusion device by discrete element method [Session S1; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Wei Pin Goh (University of Leeds); Mojtaba Ghadiri (University of Leeds) |
| #304: A study on liquid film dynamics using two-phase flow simulation with AMR method [Session S5; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Tongda Lian (Tokyo Institute of Technology); Shintaro Matsushita (Tokyo Institute of Technology); Takayuki Aoki (Tokyo Institute of Technology) |
| #316: On the influence of poly-disperse systems on pressure drop in packed beds: LBM-DEM [Session S5; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Isabel F Latimer (University of Leeds); Timothy Hunter (University of Leeds); Michael Fairweather (University of Leeds); Jeffrey Peakall (University of Leeds); David Harbottle (University of Leeds); Martyn Barnes (Sellafield Ltd) |
| #355: Development of a numerical simulation model for solid-gas-liquid-liquid four-phase flow [Session S6; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Toru Ishigami (Hiroshima University); Ayumu NIshii (Hiroshima University); Tomonori Fukasawa (Hiroshima University); Kunihiro Fukui (Hiroshima University) |
| #356: Bubble dynamics in melt pool of additive manufacturing based on MPS-DEM simulation [Session S2; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Guangtao Duan (The University of Tokyo); Mikio Sakai (The University of Tokyo) |
| #368: A particle-size dependent smoothing scheme for polydisperse Euler-Lagrange simulations [Session S6; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Chih-Chia Huang (Eindhoven University of Technology); Jeroen van Oijen (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology) |
| #402: Polydisperse particle separation statistics and clustering in reflux classifier [Poster Session; Reception Hall] |
Abhishek Sharma (IIT KHARAGPUR); Raja L (IITKGP); Arnab Atta (Indian Institute of Technology Kharagpur) |
| #404: Influence of lift force in CFD modeling of liquid-solid flow in an inclined fluidized bed [Session S4; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Priyabrata Puhan (IIT Kharagpur); Asim Mukherjee (Tata Steel Ltd.); Arnab Atta (Indian Institute of Technology Kharagpur) |
| #432: Eulerian multi-fluid PBM simulations of dense gas-liquid flow in a bubble column [Session S4; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Sujata Sen (IIT Delhi); Vivek V. Buwa (IIT Delhi) |
| #508: RANS-DEM simulation of particle-laden flow across a backward-facing step [Session S3; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Atul Jaiswal (Technical University of Munich (TUM)); Minh Duc Bui (Technical University of Munich (TUM)); Peter Rutschmann (Technical University of Munich (TUM)) |
| #509: Building a multiphase CFD framework for bubbly flow interfacial area modeling [Poster Session; Reception Hall] |
Corentin Reiss (CEA); Antoine Gerschenfeld (CEA); Catherine N. Colin (Institut de Mécanique des Fluides de Toulouse) |
| #510: CFD simulation of scouring from a submerged wall jet with a N-Euler approach [Session S3; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Gaétan Pierre (EDF ); William Benguigui (EDF); Jérôme Laviéville (EDF); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)) |
| #517: Comparison of Eulerian and CFD-DEM simulations of segregation behaviour of liquid-solid slurry flow through a horizontal channel [Session S2; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Prantik Das (Indian Institute of Technology Delhi); Vivek V. Buwa (Indian Institute of Technology Delhi) |
| #554: A temperature-tracking polydisperse Gaussian-moment model for evaporating multiphase flows [Session S4; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Benoit J Allard (University of Ottawa); James McDonald (University of Ottawa); Lucian Ivan (Canadian Nuclear Laboratories) |
| #569: Data-driven reduced-order modeling for parameterized multiphase flows in a spouted bed [Session S1; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Shuo Li (the University of Tokyo); Guangtao DUAN (The University of Tokyo); Mikio Sakai (UTokyo) |
| #632: Lattice Boltzmann simulations of droplet permeation through membranes [Session S5; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Yasushi Mino (Okayama University); Ayano Hasegawa (Kobe University); Toru Ishigami (Hiroshima University); Hideto Matsuyama (Kobe University) |
| #651: POD-ANOVA-based characterization of powder mixing mechanism in a tote blender [Poster Session; Reception Hall] |
Qi Shi (The University of Tokyo); Shuo Li (The University of Tokyo); Mikio Sakai (UTokyo) |
| #703: Numerical investigation on the two-phase flow of hydraulic pipeline with the lateral vibration based on MPS-DEM method [Session S2; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Renxiang Li (Shanghai Jiao Tong University); Fengze Xie (Shanghai Jiao Tong University); Decheng Wan (Shanghai Jiao Tong University) |
| #730: Resolved CFD-DEM simulation of three-phase flows with non-spherical particles [Session S2; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Kimiaki Washino (Osaka University); Ei Chan (Osaka University); Taichi Tsujimoto (Osaka University); Takuya Tsuji (Osaka University); Toshitsugu Tanaka (Osaka University) |
| #861: About the dynamics of a simplified metal-gas-oxide system [Session S6; Room 401, OS: Numerical Modeling of Granular and Multiphase Flows] |
Sergey Semenov (SIMTEC); Anne Boulin (CEA); Jean-Francois Haquet (CEA); Mickael Antoni (Aix-Marseille University) |
| #209: Vapor bubble growth in liquid methane in a microgravity environment [Session S12; Room 502, OS: Two-phase Flow Systems under Microgravity] |
Niklas Weber (University of Bremen); Michael Dreyer (University of Bremen) |
| #233: Numerical analyses of transcritical nanodroplet evaporation and mixing [Session S12; Room 502, OS: Two-phase Flow Systems under Microgravity] |
Nguyen Ly (Stanford University); Arijit Majumdar (Stanford University); Matthias Ihme (Stanford University) |
| #586: Capillary wicking in porous medium with wettability differences for liquid transport technology under microgravity [Session S12; Room 502, OS: Two-phase Flow Systems under Microgravity] |
Gaku Murakami (Tokyo University of Science); Kizuku Kurose (Tokyo University of Science); Masato Sakurai (Japan Aerospace Exploration Agency); Ichiro Ueno (Tokyo University of Science) |
| #847: Two-phase flow experiments onboard international space station - analysis of bubble behaviors in adiabatic circular channel [Session S12; Room 502, OS: Two-phase Flow Systems under Microgravity] |
Hitoshi Asano (Kobe University); Osamu Kawanami (University of Hyogo); Koichi Inoue ( The University of Kitakyushu); Koichi Suzuki (Tokyo University of Science); Ryoji Imai (Muroran Institute of Technology); Satoshi Matsumoto (JAXA); Haruhiko Ohta (Kyushu University) |
| #860: About aerosol properties in microgravity conditions [Session S12; Room 502, OS: Two-phase Flow Systems under Microgravity] |
Charles Graziani (Aix-Marseille University); M. Nespoulous (Aix-Marseille University); R. Denoyel (Aix-Marseille University); S. Fauve (LP ENS-Paris); C. Chauveau (ICARE University Orleans); L. Deike (MAE/HMEI Princeton University); M. Antoni (Aix-Marseille University) |
| #28: Focusing and agglomeration of microplastics under acoustic standing waves [Session S11; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Nol Schaars (Eindhoven University of Technology); Nico Dam (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology) |
| #34: Optimization of microfluidic synthesis of silver nanoparticles by coupled experiments and modelling [Session S12; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Konstantia Nathanael (University of Birmingham); Paula D Pico (Imperial College London); Sibo Cheng (Imperial College London); Nina M Kovalchuk (University of Birmingham); Alessio Lavino (Imperial College London); Rossella Arcucci (Imperial College London); Omar Matar (Imperial College London); Mark Simmons (University of Birmingham) |
| #67: Gravity driven flow induced micro filtration device for medium to high concentration samples [Session S11; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Prasanth Gunipe (IIT Roorkee); Arup Kumar Das (IIT Roorkee) |
| #97: Taylor bubble velocity for gas and non-Newtonian liquid two-phase flow in microchannels with T-junction inlet [Session S7; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Akimaro Kawahara (Kumamoto University); Yukihiro Yonemoto (Kumamoto University); Yoichi Arakaki (Kumamoto University) |
| #105: Inertial focusing of red blood cells in square tube flows of blood plasma [Session S12; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Masako Sugihara-Seki (Kansai University); Saori Tanaka (Kansai University) |
| #110: Dynamics of microfluidic systems in complex scenarios: presence of surfactants, interfacial singularities and complex geometries [Session S7; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Paula D Pico (Imperial College London); Lyes Kahouadji (Imperial College London); Assen Batchvarov (Imperial College London); Alessio Lavino (Imperial College London); Seungwon Shin (Hongik University); Jalel Chergui (LISN-CNRS); Damir Juric (LISN-CNRS); Omar Matar (Imperial College London) |
| #251: On the stability of nanobubbles in bulk [Session S8; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Ayush K Dixit (Indian Institute of Technology, Roorkee); Arup Das (Indian Institute of Technology, Roorkee) |
| #253: Liquid film thickness measurement in vertical annular flow changing the gas density and surface tension of working fluid [Session S10; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Huacheng Zhang (Kyushu University); Shoji Mori (Kyushu University); Hisano Tutomo (Kyushu University); Hiroyuki YOSHIDA (JAEA) |
| #263: The effect of contact-angle hysteresis on droplets jumping from superhydrophobic surfaces - a numerical study [Session S10; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Konstantinos Konstantinidis (Chalmers University of Technology); Johan Göhl (Fraunhofer-Chalmers Centre); Andreas Mark (Fraunhofer-Chalmers Centre); Srdjan Sasic (Chalmers University of Technology) |
| #267: Direct numerical simulation of single vapor bubble growth in nucleate pool boiling [Session S9; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Nima Samkhaniani (Karlsruhe institute of technology); Alexander Stroh (Institute of Fluid Mechanics, Karlsruhe Institute of Technology) |
| #364: Flows inside surfactant-laden and surfactant-free microfluidic drops: experiments and numerical simulations [Session S7; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Nina M Kovalchuk (University of Birmingham); Lyes Kahouadji (Imperial College London); Paula D Pico (Imperial College London); Omar Matar (Imperial College London); Mark Simmons (University of Birmingham) |
| #380: Repeated jetting driven by shape oscillations of microbubbles [Session S8; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Marco Cattaneo (ETH Zurich); Gazendra Shakya (ETH Zurich); Outi Supponen (ETH Zurich) |
| #384: A microfluidic in vitro model of microvascular collapse [Session S12; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Stephanie Hallam (University of Birmingham ); Pranav Vasanthi Bathrinarayanan (University of Birmingham ); Nina M Kovalchuk (University of Birmingham); Mark Simmons (University of Birmingham) |
| #396: Numerical simulations of two phase flows inside a pore network: a window to pore-scale oil recovery process [Poster Session; Reception Hall] |
Ankit Chourasia (Indian Institute of Technology, Kharagpur); Sushanta Mitra (University of Waterloo); Anandaroop Bhattacharya (Indian Institute of Technology, Kharagpur) |
| #406: Precipitation reaction flows in microscale geometries [Session S9; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Georgios Stergiou (Helmholtz-Zentrum Dresden-Rossendorf); Kerstin Eckert (Helmholtz-Zentrum Dresden-Rossendorf); Karin Schwarzenberger (Helmholtz-Zentrum Dresden-Rossendorf) |
| #422: Numerical study on the effect of wettability of a particulate bed on melt infiltration kinetics [Session S11; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Liang Chen (KTH); Walter Villanueva (KTH) |
| #445: Fractal analysis of gas-non-Newtonian liquid two-phase flow in microchannels [Session S7; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Haslinda Kusumaningsih (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada); M. Rian Alif Madani (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada); Muhammad Fakhri Alfath (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada); Aldy Franstanata Ritonga (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada); Deendarlianto Deendarlianto (Universitas Gadjah Mada); Indarto Indarto (Department of Mechanical and Industrial Engineering, Universitas Gadjah Mada) |
| #497: Oil-water flow: nanoparticle effects on oil drop migration with coarse-grained computations [Session S12; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Thao Nguyen (University of Oklahoma); Sepideh Razavi (University of Oklahoma); Dimitrios Papavassiliou (University of Oklahoma) |
| #507: Microscopic liquid-gas interface effect on liquid wetting [Session S10; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Jinming Zhang (HZDR); Wei Ding (HZDR); Uwe Hampel (HZDR) |
| #711: Experimental study on the microbubble generation mechanism and effect of nozzle structure [Session S8; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Chang Hun Lee (Pukyong National University); Dong In Yu (Pukyong National University); Su Cheong Park (Pukyong National University); Somchai Wongwises (King Mongkut's University); TaeJoo Kim (Korea Atomic Energy Research Institute); Ho Seon Ahn (Incheon National University) |
| #719: Inertial migration of size-controlled double emulsions [Session S8; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Ruri Hidema (Kobe University); Shogo Sasaki (Kobe University); Hiroshi Suzuki (Kobe University) |
| #743: Liquid-liquid dispersions within milli-scale symmetric confined impinging jets [Session S8; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Cong Duan (University College London); Haoyu Wang (University College London); Panagiota P Angeli (UCL) |
| #785: Multiscale simulation of two-phase flow in porous transport layer [Session S11; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
David Mueller (Institute of Fluid Mechanics, Karlsruhe Institute of Technology); Alexander Stroh (Institute of Fluid Mechanics, Karlsruhe Institute of Technology) |
| #788: Two-phase flow characteristics in a polymer pulsating heat pipe with HFE working fluid at horizontal orientation [Session S9; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Zhengyuan Pei (Kumamoto University); Nobuhito Nagasato (Kumamoto University); Yasushi KOITO (Kumamoto university) |
| #790: Measurement of nanoliter droplets in a microchannel using phase retrieval holography [Session S7; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Dai Nakai (Kyoto Institute of Technology); Yohsuke Tanaka (Kyoto Institute of Technology) |
| #851: Bubble dynamics and heat transfer in microchannel flow boiling: detailed study on bubble dynamics under controlled bubbly flow conditions [Session S9; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Pedro Pontes (IST); Iva Goncalves (IST); Vincente Andrade (IST); Antonio Moreira (IST); Ana Moita (CINAMIL) |
| #853: Dynamics of plasma proteins in high shear [Session S10; Room 401, OS: Micro- and Nano-Scale Multiphase Flows] |
Frida Nilsson (Royal Institute of Technology); Benedikt Sochor (DESY); Mu-Rong Wang (Royal Institute of Technology); Tomas Rosén (Royal Institute of Technology); Stephan V. Roth (DESY); Daniel Söderberg (Royal Institute of Technology); Mikael Broman (Karolinska University Hospital); Lisa Prahl Wittberg (Royal Institute of Technology) |
| #265: Coupling effects of ionic surfactants and electrolytes on the stability of bulk nanobubbles [Session S5; Room 404, OS: Fundamentals and Applications of Fine Bubble Technology] |
Xiaotong Ma (Tsinghua University); Mingbo Li (Tsinghua University); Xuefei Xu (Tsinghua University); Chao Sun (Tsinghua University) |
| #305: Measurement of ultrafine bubbles with impurities using sonoluminescence behavior [Poster Session; Reception Hall] |
Kaito Morishita (National Institute of Technology, Kochi College); Yusuke Nishiuchi (National Institute of Technology, Kochi College); Hayato Okumura (National Institute of Technology, Kochi College); Shigenori Akamatsu (National Institute of Technology, Kochi College); Takashi Hata (National Institute of Technology, Kochi College) |
| #327: Ultrafine bubble loss in water passing through a long plastic tube [Poster Session; Reception Hall] |
Kurumi Nakajima (Keio University); Hanako Sasaki (Keio University); Koichi Terasaka (Keio University); Satoko Fujioka (Keio University); Shun Harada (Graduate School of Keio University); Adam Donaldson (Dalhousie University) |
| #498: Local mass transfer phenomena of fine bubbles in biocatalytic processes [Session S5; Room 404, OS: Fundamentals and Applications of Fine Bubble Technology] |
Lotta Kursula (Hamburg University of Technology); Zeynep Percin (Hamburg University of Technology); Marko Hoffmann (Hamburg University of Technology); Andreas Liese (Hamburg University of Technology); Koichi Terasaka (Keio University); Michael Schluter (Hamburg University of Technology) |
| #715: Study on o/w emulsion with ultrafine bubbles [Poster Session; Reception Hall] |
Mizuki Kumon (National Institute of Technology, Kochi College); Yusuke Nishiuchi (National Institute of Technology, Kochi College); Takashi Hata (National Institute of Technology, Kochi College); Kaori Tada (National Institute of Technology, Kochi College) |
| #764: Ultrafine bubble generation in condensate of steam accompanying with gas [Session S5; Room 404, OS: Fundamentals and Applications of Fine Bubble Technology] |
Koichi Terasaka (Keio University); Kota Taguchi (Keio University); Satoko FUJIOKA (Keio University); Tomoya Tetsuka (Keio University) |
| #47: On the terminal velocity drop of elongated bubbles in highly viscous fluid and small pipe inclination [Session S1; Room 501, OS: Bubbles and Drops (Bubbles)] |
Alexandre Boucher (UNiversity of Toulouse); Joël Karp (University of Toulouse); Roel Belt (TotalEnergies); Alain A Liné (University of Toulouse) |
| #79: The lift force of ellipsoidal bubbles in water and the influence of surfactants on it [Session S5; Room 501, OS: Bubbles and Drops (Bubbles)] |
Hendrik Hessenkemper (Helmholtz-Zentrum Dresden-Rossendorf); Dirk Lucas (Helmholtz-Zentrum Dresden-Rossendorf); Akio Tomiyama (2 Graduate School of Engineering, Kobe University) |
| #138: Bubble kinematics in polydisperse confined swarms [Session S4; Room 501, OS: Bubbles and Drops (Bubbles)] |
Javier Ruiz-Rus (Institut de Mécanique des Fluides de Toulouse); Carlos Martínez-Bazán (University of Granada); Patricia Ern (Institut de Mécanique des Fluides de Toulouse); Véronique Roig (Institut de Mécanique des Fluides de Toulouse) |
| #161: Coalescence-induced jumping bubbles in microgravity [Session S1; Room 501, OS: Bubbles and Drops (Bubbles)] |
Mohammed Qaisar RAZA (Birla Institute of Technology and Science Pilani); Moritz Von Kockritz (IMFT); Julien Sebilleau (IMFT); Catherine N. Colin (Institut de Mécanique des Fluides de Toulouse); Matevz Zupancic (University of Ljubljana); Mattia Bucci (University of Ljubljana); Tadej Troha (University of Ljubljana); Iztok Golobic (University of Ljubljana) |
| #179: Cavitation induced by pulsed and continuous-wave fiber lasers in confinement [Session S1; Room 501, OS: Bubbles and Drops (Bubbles)] |
Jelle Schoppink (University of Twente); Jan Krizek (Swiss Federal Institute of Technology in Lausanne (EPFL)); Christophe Moser (Swiss Federal Institute of Technology in Lausanne (EPFL)); David Fernandez Rivas (University of Twente) |
| #207: Bubble collapse in hydraulic fluids [Session S1; Room 501, OS: Bubbles and Drops (Bubbles)] |
Andris Rambaks (RWTH Aachen University, Institute for Fluid Power Drives and Systems (ifas)); Katharina Schmitz ( RWTH Aachen University, Institute for Fluid Power Drives and Systems (ifas)) |
| #221: Numerical analysis of bubble cutting [Session S5; Room 501, OS: Bubbles and Drops (Bubbles)] |
Rahul Subburaj (TU/e); Yali Tang (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology) |
| #235: Numerical simulation of surfactant-laden flows [Session S3; Room 501, OS: Bubbles and Drops (Bubbles)] |
Giovanni Soligo (Okinawa Institute of Science and Technology Graduate University); Ianto Cannon (Okinawa Institute of Science and Technology); Marco Edoardo Rosti (Okinawa Institute of Science and Technology) |
| #239: A simulation of foam formation using multi-phase-field model and lattice Boltzmann method with adaptive mesh refinement [Session S2; Room 501, OS: Bubbles and Drops (Bubbles)] |
Yos P Sitompul (Tokyo Tech); Takayuki Aoki (Tokyo Tech); Seiya Watanabe (Kyushu University); Kenta Sugihara (JAEA); Tomohiro Takaki (Kyoto Institute of Technology) |
| #241: Characterization of dynamic features of bubbly flow rising in a slightly inclined vertical pipe: a three-dimensional numerical study [Session S4; Room 501, OS: Bubbles and Drops (Bubbles)] |
Yijie Liu (The university of Tokyo); Shu Takagi (The University of Tokyo); Kazuyasu Sugiyama (Osaka University) |
| #250: Electrohydrodynamics of bubble rising [Session S5; Room 501, OS: Bubbles and Drops (Bubbles)] |
Darshan Patel (Indian Institute of Technology Madras); S Vengadesan (Indian Institute of Technology Madras) |
| #434: Influence of density and viscosity on deformation, breakage and coalescence of bubbles in turbulence [Session S3; Room 501, OS: Bubbles and Drops (Bubbles)] |
Alessio Roccon (University of Udine); Francesca Mangani (TU Wien); Giovanni Soligo (Okinawa Institute of Science and Technology Graduate University); Alfredo Soldati (TU Wien) |
| #452: Lagrangian modeling of vapor bubble growth in flash boiling single droplet considering bubble-bubble interactions [Session S2; Room 501, OS: Bubbles and Drops (Bubbles)] |
Avijit Saha (Institute for Combustion Technology); Abhishek Deshmukh (Institute for Combustion Technology); Temistocle Grenga (Institute for Combustion Technology); Heinz Pitsch (Institute for Combustion Technology) |
| #457: Experimental investigation of the Local mass transfer around a slug bubble in a rectangular column [Session S6; Room 501, OS: Bubbles and Drops (Bubbles)] |
Lokesh Rohilla (Council of Scientific and Industrial Research-IMMT); Ravi Prakash (Indian Institute of Technology, Roorkee) |
| #490: On free rising skirt bubble [Session S5; Room 501, OS: Bubbles and Drops (Bubbles)] |
Dominique Legendre (IMFT - Toulouse) |
| #537: Formation of microbubble-encapsulated vesicle by flow-focusing and inverted emulsion [Session S6; Room 501, OS: Bubbles and Drops (Bubbles)] |
Ryuki Kakukawa (The University of Tokyo); Hiroko Shiozaki (The University of Tokyo); Ryota Kiyozumi (The University of Tokyo); Mitsuhisa Ichiyanagi (Sophia University); Shu Takagi (The University of Tokyo) |
| #566: Ship frictional drag reduction using hydrofoil bubble generators [Session S6; Room 501, OS: Bubbles and Drops (Bubbles)] |
Yuichi Murai (Hokkaido University); Ichiro Kumagai (Meisei University) |
| #567: Influence of particle surface properties on the stability of pickering foams [Session S2; Room 501, OS: Bubbles and Drops (Bubbles)] |
Nick Brown (University of Oklahoma); Sepideh Razavi (University of Oklahoma) |
| #644: Effect of polydispersity and bubble clustering on the steady shear viscosity of dilute bubble suspensions in Newtonian media [Session S4; Room 501, OS: Bubbles and Drops (Bubbles)] |
Stamatina Mitrou (UCL); Simona Migliozzi (University College London); Panagiota P Angeli (UCL); Luca Mazzei (UCL) |
| #648: Role of surfactant's adsorption kinetics on the inhibition of coalescence of bubbles [Session S3; Room 501, OS: Bubbles and Drops (Bubbles)] |
Sandra Orvalho (Institute of Chemical Process Fundamentals of the CAS); Petr Stanovsky (ICPF of the CAS); Marek Ruzicka (ICPF of the CAS); Maria Zednikova (Institute of Chemical Process Fundamentals of the CAS); Pavlína Basařová (UCT Prague) |
| #683: Polarization measurement of flow structure around a moving bubble/solid in a quiescent liquid [Session S6; Room 501, OS: Bubbles and Drops (Bubbles)] |
Hiroaki Kusuno (Tokyo University of Agriculture and Technology); Yoshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
| #690: Visualization and measurement of foam flowing between two-dimensional narrow parallel plates [Session S2; Room 501, OS: Bubbles and Drops (Bubbles)] |
Shimpei Saito (AIST); Soumei Baba (AIST); Naoki Takada (National Institute of Advanced Industrial Science and Technology); Satoshi Someya (AIST); Hiroshi Ito (AIST) |
| #701: Effects of impurities on the bursting dynamics of centimetric bubbles [Session S3; Room 501, OS: Bubbles and Drops (Bubbles)] |
Hongtao Qian (Guangdong Technion- Israel Institute of Technology); Zhengyu Yang (University of Illinois at Urbana-Champaign); Feng Jie (University of Illinois at Urbana-Champaign); Cheng Li (Guangdong Technion- Israel Institute of Technology) |
| #708: The conflict of bubbles and droplets: a model for the interaction of the two phases [Session S4; Room 501, OS: Bubbles and Drops (Bubbles)] |
Madeline E Federle (Brown University); Roberto Zenit (Brown University) |
| #728: On the stability of bubble chains in champagne [Session S1; Room 501, OS: Bubbles and Drops (Bubbles)] |
Roberto Zenit (Brown University); Omer Atasi (IMFT - Toulouse); Mithun Ravisankar (Brown University); Dominique Legendre (IMFT - Toulouse) |
| #795: Toroidal bubbles formation from the orifice of a buoyancy driven pivoting lever [Session S6; Room 501, OS: Bubbles and Drops (Bubbles)] |
Lang Qin (Tsinghua University); Shuhong Liu (Tsinghua University); Zhigang Zuo (Tsinghua University) |
| #32: Theoretical and numerical analysis of wave converging inside the two-dimensional cylindrical water column impinged by a curved shock wave [Session S12; Room 505, OS: Bubbles and Drops (Drops)] |
Sheng Xu (Tsinghua University); Bing Wang (Tsinghua University) |
| #59: Electrokinetic flow about a drop [Session S7; Room 505, OS: Bubbles and Drops (Drops)] |
Michael R Booty (New Jersey Institute of Technology); Manman Ma (Tongji University); Michael Siegel (New Jersey Institute of Technology) |
| #65: Numerical study of drop deformation and fragmentation in liquid-liquid configuration [Session S5; Room 505, OS: Bubbles and Drops (Drops)] |
Linkai Wei (IRSN); Renaud Meignen (IRSN); Nicolas D. Rimbert (Université de Lorraine) |
| #86: Evaluating the concentration of contaminants at the surface of a drop from its shape oscillation dynamics [Session S7; Room 505, OS: Bubbles and Drops (Drops)] |
Benjamin Lalanne (University of Toulouse - Toulouse INP); Olivier Masbernat (CNRS-University of Toulouse); Frédéric Risso (CNRS-IMFT) |
| #102: Central sheet formation from simultaneous impacts of two droplets on a dry substrate [Session S10; Room 505, OS: Bubbles and Drops (Drops)] |
Anjan Goswami (Imperial College London); Yannis Hardalupas (Imperial College London) |
| #122: Controlling droplet splashing and bouncing by dielectrowetting [Session S10; Room 505, OS: Bubbles and Drops (Drops)] |
Miguel Angel Quetzeri Santiago (University of Oxford ); Rafael Castrejón-Pita (Queen Mary University of London); Alfonso Castrejón-Pita (University of Oxford ) |
| #123: Evaluation of large sessile drops interface under gravity and electric fields [Session S11; Room 505, OS: Bubbles and Drops (Drops)] |
Alekos Ioannis Garivalis (DESTEC, University of Pisa); Salvatore Lobianco (DESTEC, University of Pisa); Alexey Rednikov (2TIPs, Universitè libre de Bruxelles (ULB)); Paolo Di Marco (DESTEC, University of Pisa) |
| #131: Morphological characterization of 3D spray droplets [Session S5; Room 505, OS: Bubbles and Drops (Drops)] |
Victor Chéron (CORIA); Jorge César Brändle de Motta (CORIA); Jean-Bernard Blaisot (CORIA); Thibault Ménard (CORIA) |
| #132: What sets the leidenfrost temperature of a drop on a hot solid surface [Session S6; Room 505, OS: Bubbles and Drops (Drops)] |
Yuki Wakata (Tsinghua University); Ning Zhu (Tsinghua University); Xiaoliang Chen (Tsinghua University); Sijia Lyu (Tsinghua University ); Detlef Lohse (Physics of Fluids Group, Max-Planck Center Twente for Complex Fluid Dynamics & JM Burgers Center, Department of Science and Technology, University of Twente); Xing Chao (Tsinghua University); Chao Sun (Tsinghua University) |
| #139: Controlled ferrofluid droplet impact under the influence of a magnetic field [Session S11; Room 505, OS: Bubbles and Drops (Drops)] |
Sudip Shyam (University of Waterloo); Utsab Banerjee (University of Waterloo); Sushanta Mitra (University of Waterloo) |
| #164: Experimental investigation of the oscillation characteristics of large raindrops [Session S7; Room 505, OS: Bubbles and Drops (Drops)] |
Jongwon Lee (Seoul National University); Wontae Hwang (Seoul National University) |
| #184: Experimental and numerical investigation of droplet impacts onto cubic pillars with a wetted base [Session S10; Room 505, OS: Bubbles and Drops (Drops)] |
Patrick A Palmetshofer (University of Stuttgart, Institute of Aerospace Thermodynamics); Weibo Ren (University of Stuttgart, Institute of Aerospace Thermodynamics); Jonas Steigerwald (University of Stuttgart, Institute of Aerospace Thermodynamics); Anne K. Geppert (University of Stuttgart, Institute of Aerospace Thermodynamics); Bernhard Weigand (University of Stuttgart, Institute of Aerospace Thermodynamics) |
| #202: How gravity influence droplets freezing on solid surface [Session S6; Room 505, OS: Bubbles and Drops (Drops)] |
Hao Zeng (Tsinghua university); Sijia Lyu (Tsinghua university); Dominique Legendre (IMFT); Chao Sun (Tsinghua university) |
| #320: Numerical investigation of the mechanism of early crown formation during an oblique droplet impact onto a wall film [Session S9; Room 505, OS: Bubbles and Drops (Drops)] |
Jonathan Stober (Institute of Aerospace Thermodynamics, University of Stuttgart); Kathrin Schulte (Institute of Aerospace Thermodynamics, University of Stuttgart) |
| #337: Synchotron X-ray radiography of ultrasonic droplet fragmentation [Session S5; Room 505, OS: Bubbles and Drops (Drops)] |
Anunay Prasanna (ETH Zurich); Luc Biasiori-Poulanges (ETH Zurich); Ya-Chi Yu (ETH Zurich); Hazem El-Rabii (Institut Pprime, ISAE ENSMA); Outi Supponen (ETH Zurich) |
| #360: Computational investigation of compressibility effects in high-speed droplet impact [Session S9; Room 505, OS: Bubbles and Drops (Drops)] |
Erin M Burrell (University of Michigan); William White (University of Michigan); Eric Johnsen (University of Michigan) |
| #377: Curvature-surface analysis to characterize the early stage of the atomization process of the pressure swirl injector [Session S5; Room 505, OS: Bubbles and Drops (Drops)] |
Diego Ferrando (Université de Rouen Normandie); Chetankumar S. Vegad (Universitñe de Rouen Normandie); Saïd Idlahcen, (Université de Rouen Normandie); Aalexis Vandel (Université de Rouen Normandie); Bruno Renou (Université de Rouen Normandie); Gilles Godard (Université de Rouen Normandie); Gilles Cabot (Université de Rouen Normandie); Jean-Bernard Blaisot (Université de Rouen Normandie); Benjamin Duret (Université de Rouen Normandie); Julien Reveillon (Université de Rouen Normandie); François-Xavier Demoulin (Université de Rouen Normandie) |
| #387: Role of solid particles in tuning microfluidic transition regimes for droplet generation [Session S8; Room 505, OS: Bubbles and Drops (Drops)] |
Loïc Chagot (University College London (UCL)); Simona Migliozzi (University College London); Panagiota P Angeli (UCL) |
| #431: Water droplet impact on thin oil film and bubble entrapment: three phases simulation [Session S9; Room 505, OS: Bubbles and Drops (Drops)] |
Pierre-Antoine Maes (LadHyx); Christophe Josserand (LadHyX, CNRS & E. Polytechnique); Alidad Amirfazli (University of York) |
| #453: CaCl2-Directed cross-linking and deposition patterns of evaporating sodium alginate sessile droplets [Session S8; Room 505, OS: Bubbles and Drops (Drops)] |
Maedeh Saberi; Ghazal Biglari; Jafar Farhadi; Vahid Bazargan (University of Brighton); Marco Marengo (University of Brighton) |
| #476: Aerosol generation by bubbles bursting at the interface of a faucet water jet [Session S5; Room 505, OS: Bubbles and Drops (Drops)] |
Antonella Succar (Polytechnique Montreal); Emilie Bédard (Polytechnique Montreal); Michele Prevost (Ecole Polytechnique de Montreal); Etienne Robert (Polytechnique Montreal) |
| #478: Effect of wettability on droplet formation in capillary needle [Session S8; Room 505, OS: Bubbles and Drops (Drops)] |
Ravi Prakash (iit roorkee); Sumana Ghosh (Indian institute of technology Roorkee) |
| #491: Effect of the ambiant medium on the freezing of a droplet [Session S6; Room 505, OS: Bubbles and Drops (Drops)] |
Sijia Lyu (Tsinghua University); Chao Sun (Tsinghua University); Dominique Legendre (IMFT - Toulouse) |
| #496: Effect of curvature distortion and refractive index on flow measurement in a droplet [Session S7; Room 505, OS: Bubbles and Drops (Drops)] |
Eugene Gatete (University of Tsukuba, Systems and Information Engineering, Graduate School of Science and Technology, Degree Program of Engineering Mechanics); Akiko Kaneko (University of Tsukuba); Biao SHEN (University of Tsukuba, Faculty of Engineering of Information Engineering and Systems) |
| #499: Tuning the dripping-to-jetting transition with soft colloids in flow-focusing microchannels [Session S8; Room 505, OS: Bubbles and Drops (Drops)] |
Simona Migliozzi (University College London); Loïc Chagot (University College London (UCL)); Panagiota P Angeli (UCL) |
| #513: Wetting properties of ice-water systems [Session S6; Room 505, OS: Bubbles and Drops (Drops)] |
Rodolphe Grivet (LadhyX-Ecole polytechnique); Axel Huerre (MSC Université Paris Cité - CNRS); Thomas Séon (Institut ∂'Alembert, CNRS); Christophe Josserand (LadHyX, CNRS & E. Polytechnique) |
| #571: Prediction of deformation of a drop during an impact on a solid surface using an encoder-decoder [Session S9; Room 505, OS: Bubbles and Drops (Drops)] |
Jingzu Yee (Tokyo University of Agriculture and Technology); Daichi Igarashi (Tokyo University of Agriculture and Technology); Shun Miyatake (Tokyo University of Agriculture and Technology); Yoshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
| #575: Numerical investigation of high-speed droplet impact on flat surfaces with different wettability [Session S12; Room 505, OS: Bubbles and Drops (Drops)] |
Tianyi Wei (Kyoto University); Abhishek Lakshman Pillai (Kyoto University); Ryoichi Kurose (Kyoto University) |
| #605: Contact line instability induced by thermal effects during drop impact on heated surfaces [Session S10; Room 505, OS: Bubbles and Drops (Drops)] |
Takahiro Okabe (Hirosaki University); Keitaro Shirai (Hirosaki University); Takumi Okawa (Hirosaki University); Junnosuke Okajima (Tohoku University); Minori Shirota (Hirosaki University) |
| #617: Deformation and rivulet formation of the sessile droplet falling on a vertical plate [Poster Session; Reception Hall] |
Souma Ando (Chubu University); Hiroya Hiramatsu (Chubu University); Takahiro Ito (Chubu University); Yoshiyuki Tsuji (Nagoya University) |
| #620: Temperature field and internal flow in an acoustically levitated droplet under laser heating [Session S7; Room 505, OS: Bubbles and Drops (Drops)] |
Tamaki Aiko (University of Tsukuba); Biao Shen (University of Tsukuba); Koji Hasegawa (Kogakuin University); Akiko Kaneko (University of Tsukuba) |
| #649: Suppression of the dimple formation of impacting drops by electrical charge [Session S11; Room 505, OS: Bubbles and Drops (Drops)] |
Keitaro Shirai (Hirosaki University); Ayaka Kodama (Hirosaki University); Taimei Miyagawa (Hirosaki University); Takahiro Okabe(Hirosaki University); Yohsuke Matsushita (Hirosaki University); Yasuhiro Saito (Kyushu Institute of Technology); Yoshiya Matsukawa (Tohoku University); Hideyuki Aoki (Tohoku University); Masatoshi Daikoku (Hachinohe Institute of Technology); Junichi Fukano (Honda Motor); Minori Shirota (Hirosaki University) |
| #672: Solidification pattern formed by thermal conduction of molten metal drops spreading on a substrate [Session S11; Room 505, OS: Bubbles and Drops (Drops)] |
Takumi Okawa (Hirosaki University); Yusuke Nakagawa (Hirosaki University); Kazuaki Maeda (Hirosaki University); Takahiro Okabe (Hirosaki University); Minori Shirota (Hirosaki University) |
| #691: CFD simulations of particle-laden droplets impact on a plane wall [Poster Session; Reception Hall] |
Richard Tribess (Otto-von-Guericke-University Magdeburg); Martin Sommerfeld (Otto-von-Guericke University Magdeburg) |
| #700: The role of weber and Reynolds number in the dynamics of a bouncing drop [Session S8; Room 505, OS: Bubbles and Drops (Drops)] |
Praveen k Sharma (The LNMIIT jaipur); Harish N Dixit (IIT Hyderabad) |
| #705: Lubrication type model for wetting dynamics of multicomponent droplets [Session S12; Room 505, OS: Bubbles and Drops (Drops)] |
Zhenying Wang (Kyushu University); Prashant Valluri (University of Edinburgh); George Karapetsas (Aristotle University of Thessaloniki); Chihiro Inoue (Kyushu University) |
| #759: Evaporation characteristics of leidenfrost droplets on a heated pool [Session S6; Room 505, OS: Bubbles and Drops (Drops)] |
Koji Hasegawa (Kogakuin University); Ryo Matsumoto (Kogakuin University) |
| #776: Climbing mechanism of self-propelled drops on a ratchet with hiybrid wettability in the low-temperature regime [Session S12; Room 505, OS: Bubbles and Drops (Drops)] |
Minori Shirota (Hirosaki University); Tomomichi Shirahama (Hirosaki University); Ryota Ato (Hirosaki University); Takahiro Okabe (Hirosaki University) |
| #822: Droplet jump from particle bed [Session S12; Room 505, OS: Bubbles and Drops (Drops)] |
Karl Cardin (Portland State University); Facundo Cabrera (Portland State University); Raúl B Cal (Portland State University) |
| #875: Examples of the use of machine learning for multiphase flow predictions [Session S12; Room 402, Special Session: Machine Learning for Multiphase Flows] |
Gretar Tryggvason (Johns Hopkins University); Jiacai Lu (Johns Hopkins University) |
| #876: Modelling Local steady-state and time-dependent flow and transport in porous media by multiscale neural networks [Session S12; Room 402, Special Session: Machine Learning for Multiphase Flows] |
Agnese Marcato (Politecnico di Torino); Javier E. Santos (Los Alamos National Laboratory); Chaoyue Liu (LRCS); Gianluca Boccardo (Politecnico di Torino); Alejandro A. Franco (LRCS); Masa Prodanovic (University of Texas at Austin); Daniele Marchisio (Politecnico di Torino); |
| #877: Data-driven shape optimisation of chemical reactors [Session S12; Room 402, Special Session: Machine Learning for Multiphase Flows] |
Nausheen Basha (Imperial College London); Thomas Savage (Imperial College London); Ehecatl Antonio del Rio Chanona (Imperial College London); Omar K. Matar (Imperial College London) |
| #878: Review of machine learning for hydrodynamics, transport and reactions in multiphase flows and reactors [Session S12; Room 402, Special Session: Machine Learning for Multiphase Flows] |
Li-Tao Zhu (Shanghai Jiao Tong University); Bo Ouyang (Shanghai Jiao Tong University); He Lei (Shanghai Jiao Tong University); Zheng-Hong Luo (Shanghai Jiao Tong University) |
| #879: Physics-inspired machine learning for multiphase flow modeling [Session S12; Room 402, Special Session: Machine Learning for Multiphase Flows] |
Sivaramakrishnan Balachandar (University of Florida) |