Topics: Computational Techniques for Multiphase Flows
| #20: Multiscale modelling of contact line dynamics using combined finite volume - molecular dynamics simulation [Session S7; Room 503] |
Avik Saha (IIT Roorkee); Arup Kumar Das (IIT Roorkee) |
| #30: Automatic mesh refinement with the N-Euler multiphase solver neptune_cfd to identify software and hardware limitations for industrial fluidized bed simulations at Exascale [Session S9; Room 503] |
Herve Neau (IMFT / CNRS); Maxime Pigou (IMFT / CNRS); Nicolas Renon (UMS CALMIP); Cyril Baudry (EDF); yvan Fournier (EDF); Nicolas Merigoux (EDF); Renaud Ansart (LGC, Toulouse INP); Olivier Simonin (IMFT, Toulouse INP) |
| #39: Improvement of simple CLSVOF method in the full Eulerian framework [Poster Session; Reception Hall] |
Naoki Shimada (Sumitomo Chemical Co. Ltd.); Yusuke Uchihashi (Sumitomo Chemical Co. Ltd.); Yuta Yaegashi (Sumitomo Chemical Co. Ltd.); Miya Matsuo (Sumitomo Chemical Co. Ltd.); Mitsuhiro Ohta (Graduate School of Technology, Industrial and Social Sciences, Tokushima University); Akio Tomiyama (Graduate School of Engineering, Kobe University) |
| #40: Simulation of bubble collapse near a curved wall using a penalization method [Session S7; Room 503] |
Lucas Ménez (Pprime-ENSMA); Philippe Parnaudeau (Pprime-ENSMA); Marianne Beringhier (Pprime-ENSMA); Eric Goncalves (ISAE-ENSMA) |
| #46: Numerical simulation of viscoelastic and Newtonian fluid jets in the initial phase of electrospinning [Session S3; Room 503] |
Julian K Liedtke (Institut für Mechanische Verfahrenstechnik, Universität Stuttgart); Carsten Mehring (Institut für Mechanische Verfahrenstechnik, Universität Stuttgart) |
| #54: A numerical strategy based on a diffuse interface two-fluid model to simulate the melting of a solid swept by a hot gas flow [Session S8; Room 503] |
Lucas Tallois (CEA); Simon Peluchon (CEA); Philippe Villedieu (ONERA, DMPE) |
| #94: Eulerian computation of droplet preferential concentration in turbulence [Poster Session; Reception Hall] |
George Downing (Imperial College London); Yannis Hardalupas (Imperial College London) |
| #114: Numerical simulation of counter-current flow in a vertical pipe with rounded ends [Session S2; Room 503] |
Michio Murase (Institute of Nuclear Safety System, Inc.); Toshiya Takaki (Institute of Nuclear Safety System, Inc.); Yoichi Utanohara (Institute of Nuclear Safety System, Inc.) |
| #153: Interfacial mass transfer based on a geometric volume of fluid solver [Session S4; Room 503] |
Alexis Tourbier (IFPEN); Lionel Gamet (IFPEN); Typhene Michel (IFPEN); Philippe Beard (IFPEN); Joelle Aubin (Universite de Toulouse); Hrvoje Jasak (Wikki Ltd) |
| #167: Lattice Boltzmann method for multiphase flows with two-relaxation time collision operator [Session S8; Room 503] |
Takeshi Seta (University of Toyama); Keiichi Yamamoto (Nippon Pillar Packing) |
| #192: Slip boundary condition in the contact line region of laminar two-phase separated flow [Session S5; Room 503] |
Ayelet Goldstein (Braude-College of Engineering); Ofer Eyal (Braude-Academic College); Amos Ullmann (Tel-Aviv University); Neima Brauner (Tel-Aviv University) |
| #197: Exploring differences in second order statistics for the simulation of multi-scale atomization process [Session S3; Room 503] |
Alberto Remigi (SAFRANTECH); Petar Tomov (SAFRAN Aircraft Engines); Marc Massot (CMAP, Ecole Polytechnique); Ludovic Goudenege (Ecole Polythechnique); François-Xavier Demoulin (CORIA); Benjamin Duret (CORIA); Julien Reveillon (CORIA) |
| #206: A sharp front tracking method based on geometric interface reconstruction [Session S5; Room 503] |
Christian Gorges (University of Magdeburg); Fabien Evrard (Otto-von-Guericke University Magdeburg); Robert Chiodi (Los Alamos National Laboratory); Berend van Wachem (University of Magdeburg); Fabian Denner (University of Magdeburg) |
| #210: Comparison of diffuse and sharp interface methods for highly compressible flows within a unified framework [Session S6; Room 503] |
Nico Fleischmann (Technical University of Munich); Stefan Adami (Technical University of Munich); Nikolaus Adams (Technical University of Munich) |
| #220: A symmetric filamentary approach to the moment-of-fluid method [Session S4; Room 503] |
Philippe Hergibo (Cardiff University); Timothy Phillips (Cardiff University); Zhihua Xie (Cardiff University) |
| #236: State sensing of bubble jet flow based on acoustic recognition and deep learning [Session S3; Room 503] |
Nao Mikami (Osaka University); Yoshitaka Ueki (Osaka University); Masahiko Shibahara (Osaka University); Kosuke Aizawa (Japan Atomic Energy Agency); Kuniaki Ara (Japan Atomic Energy Agency) |
| #257: A novel front tracking – immersed boundary method (FT-IBM) for multiphase flows. [Session S5; Room 503] |
Maike Baltussen (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
| #286: A 3D wide-area simulation for real river flood disaster including driftwood with high resolution mesh [Session S2; Room 503] |
Dawei Shen (Tokyo Institude of Technology); Takayuki Aoki (Tokyo Institude of Technology); Seiya Watanabe (Kyushu University); Shuji Moriguchi (Tohoku University); Shinsuke Takase (Hachinohe Institute of Technology); Masaaki Sakuraba (Nippon Koei) |
| #315: A mass-conserving pressure-based method for compressible two-phase flows with phase change and wetting effects [Session S6; Room 503] |
Marica Pelanti (ENSTA Paris); Nicolo Scapin (KTH); Luca Brandt (KTH & NTNU); Wai Hong Ronald Chan (University of Colorado); Suhas Jain ( Stanford University); Shahab Mirjalili (Stanford University) |
| #318: Local behavior near corners: triple points in laminar two-phase flow and other examples [Session S5; Room 503] |
Ofer Eyal (Braude-Academic College); Ayelet Goldstein (Braude-College of Engineering) |
| #363: A lattice Boltzmann flux solver with log-conformation representation and its application to capsule deformation in viscoelastic flow [Session S8; Room 503] |
Hua Zhang (National University of Singapore, Southern University of Science and Technology); Chang Shu (National University of Singapore); Lian-Ping Wang (Southern University of Science and Technology) |
| #383: Simulating three-dimensional two-phase flows subject to surface tension with piecewise parabolic interface reconstruction [Session S4; Room 503] |
Fabien Evrard (Otto-von-Guericke University Magdeburg); Robert Chiodi (Los Alamos National Laboratory); Berend van Wachem (University of Magdeburg); Olivier Desjardins (Cornell University) |
| #388: Investigating the effects of spurious force oscillations on the motion of finite size particles modelled using the immersed boundary method [Session S9; Room 503] |
Mohammad Giahi (University of Saskatchewan); Donald Bergstrom (University of Saskatchewan) |
| #394: In silico study of the effect of surfactant on the oil spreading at the interface between water droplets and hydrophobic surfaces [Session S7; Room 503] |
Takeshi Kobayashi (University College London); Teng Dong (University College London); Kristo Kotsi (University College London); Alexander Moriarty (University College London); Ian McRobbie (Innospec Inc.); Alberto Striolo (University College London); Panagiota P Angeli (UCL) |
| #440: Fast simulation of multiphase compressible flows through GPU acceleration [Session S6; Room 503] |
Henry A Le Berre (Georgia Institute of Technology); Anand Radhakrishnan (Georgia Institute of Technology); Spencer H Bryngelson (Georgia Institute of Technology) |
| #450: Phase-field lattice-Boltzmann simulation of micro droplet motion on solid surface [Session S8; Room 503] |
Naoki Takada (National Institute of Advanced Industrial Science and Technology); Tomohiro Takaki (Kyoto Institute of Technology); Shintaro Aihara (Kyoto Institute of Technology); Katsuo Mogi (Tokyo Denki University); Satoshi Someya (National Institute of Advanced Industrial Science and Technology); Soumei Baba (National Institute of Advanced Industrial Science and Technology); Shimpei Saito (AIST) |
| #483: High-resolution simulation of turbulent Taylor bubble flow at low Reynolds number [Session S7; Room 503] |
Edo Frederix (NRG); Jun Fang (ANL); Elia Merzari (PSU); Ed Komen (NRG) |
| #493: Spreading of spilled low sulfur fuel oil (LSFO): a numerical study [Session S2; Room 503] |
Jaebeen Lee (Seoul National Univ); Linfeng Piao (Seoul National Univ); Hyungmin Park (Seoul National Univ) |
| #524: A Cartesian cut cell method for mixed robin or Navier slip boundary conditions [Session S7; Room 503] |
Alejandro Quirós Rodríguez (Sorbonne Université); Tomas Fullana (Sorbonne University); Vincent Le Chenadec (Gustave Eiffel University); Taraneh Sayadi (Sorbonne University) |
| #530: A hybrid IBM, LES, VoF and Lagrangian tracking for two-phase flows simulation. application to inline separation [Session S1; Room 503] |
Hanane Atmani (IMFT); Dominique Legendre (IMFT); Rémi Zamansky (IMFT); Eric CLIMENT (IMFT) |
| #541: A new method for the adaptative removal of stiffness in PDEs [Session S6; Room 503] |
Laurent Duchemin (PMMH / ESPCI); Jens Eggers (University of Bristol) |
| #547: Prediction of flow pattern transition in pipelines using Taylor-Hood finite elements [Session S1; Room 503] |
David Lazo-Vásquez (Universidade de São Paulo); Jorge Luis Baliño (Universidade de São Paulo) |
| #580: Dugks-ibm simulation of particle-laden turbulent channel flow on a non-uniform orthogonal mesh [Poster Session; Reception Hall] |
Kairzhan Karzhaubayev (Southern University of Science and Technology); Lian-Ping Wang (Southern University of Science and Technology); Cheng Peng (Shandong University) |
| #616: Homogeneous and heterogeneous transport in porous media with microstructural reactive gradients [Session S8; Room 503] |
Dario Maggiolo (Chalmers University of Technology); Oskar Modin (Chalmers University of Technology); Angela Kalagasidis (Chalmers University of Technology) |
| #619: NURBS-based immersed boundary method for arbitrarily shaped particles [Session S9; Room 503] |
Lorenzo Vallisa (von Karman Institute for Fluid Dynamics); Maria Teresa Scelzo (von Karman Institute for Fluid Dynamics); Silvania Lopes (von Karman Institute for Fluid Dynamics); Michel De Paepe (Ghent University); Delphine Laboureur (von Karman Institute for Fluid Dynamics) |
| #628: Lagrangian-Eulerian modeling of fuel-coolant interaction in nuclear reactor severe accidents [Session S2; Room 503] |
Min-Soo Kim (Korea Maritime and Ocean University), Dong-Jin Shin (Korea Maritime and Ocean University), Dong-Ha Kim (Korea Maritime and Ocean University), Kwang-Hyun Bang (Korea Maritime and Ocean University) |
| #676: Assessing computational modelling of interface dispersion with hybrid multifluid CFD approaches [Session S6; Room 503] |
Daniele Vivaldi (IRSN); Marco Colombo (University of Sheffield) |
| #704: Implementation of the coupled level set and volume of fluid method in OpenFOAM: a comparison with existing VOF techniques [Session S1; Room 503] |
Songtao Chen (Shanghai Jiao Tong UNiversity); Weiwen Zhao (Shanghai Jiao Tong UNiversity); Decheng Wan (Shanghai Jiao Tong UNiversity) |
| #734: A coupling VOF/embedded boundary method to model contact angles on arbitrary solid surfaces [Session S4; Room 503] |
Mathilde B Tavares (LadHyX, Ecole polytechnique); Christophe Josserand (LadHyX, CNRS & E. Polytechnique); Alexandre Limare (Institut Jean Le Rond d'Alembert, Sorbonne Université); José Maria Lopez Herrera Sanchez (Universidad de Sevilla, Ingenieria Aerospacial y Mecanica de Fluidos); Stéphane Popinet (Institut Jean Le Rond d'Alembert, Sorbonne Université) |
| #796: Curvature filtering for a high-order and sharp interface multiphase flow solver [Poster Session; Reception Hall] |
Ward G Haegeman (CMAP); david henneaux (VKI); pierre schrooyen (Cenaero); Thierry Magin (VKI); Marc Massot (CMAP, Ecole Polytechnique) |
| #824: CFD study on erosion characteristics of a pipe bend under liquid-solid two phase flow [Session S1; Room 503] |
Gyanendra Tiwari (Indian Institute of Technology Madras); Dhiman Chattarjee (Indian Institute of Technology Madras) |
| #829: Subgrid-scale modeling of liquid drop bag breakup [Session S3; Room 503] |
Austin H Han (Cornell University); Olivier Desjardins (Cornell University) |
| #854: A new strategy for direct numerical simulations with fully resolved particles based on volume-filtering [Session S9; Room 503] |
Mohamed Houssem Kasbaoui (Arizona State University); Marcus Herrmann (Arizona State University) |
| #855: ACoolTPS – advanced cooling of high power microsystems using two-phase flows systems in complex geometries [Session S5; Room 503] |
Gustavo R. Anjos (Coppe/UFRJ); Prashant Valluri |
| #859: Simulation of polydisperse oscillating droplets through high order numerical methods for geometric moment equations [Session S8; Room 503] |
Katia Ait-Ameur (Ecole Polytechnique); Arthur Loison (CMAP, École polytechnique); Samuel Kokh (CEA); Teddy Pichard (CMAP, Ecole Polytechnique); Marc Massot (CMAP, Ecole Polytechnique) |
| #863: Numerical simulation of the impact of gas jet on a free water surface [Poster Session; Reception Hall] |
Ward G Haegeman (CMAP); Clement LeTouze (ONERA); Joel Dupays (ONERA); Marc Massot (CMAP, Ecole Polytechnique) |
| #870: Accuracy of state-of-the-art CFD solvers for the numerical simulation of cavitation, particle re-suspension/settling and oil-water separation processes, for oily-sludge treatment applications [Session S1; Room 503] |
Manolia Andredaki (Liverpool John Moores University); Marco Picco (University of Brighton); Stephen Symes (Liverpool John Moores University); Eduardo Blanco Davis (Liverpool John Moores University); Jin Wang (Liverpool John Moores University); Ben Monkton (Envorem); Mike Levey (Envorem); Mark Batt-Raawden (Envorem); Anastasios Georgoulas (University of Brighton) |