Session 2

S2 Topics: Particle Dynamics 15:00−16:20, April 3, Room 301
Session Chair: Masahiro Takei (Chiba University)
15:00 #602: Impact dynamics of a rigid sphere onto water: influence of surface wettability Prasanna Kumar Billa (IIT MADRAS); Tejaswi Josyula (Institute for Technical Thermodynamics, Technical University of Darmstadt); Pallab Sinha Mahapatra (Indian Institute of Technology, Madras)
15:20 #797: Towards numerical simulation of finite-sized moving particles in compressible flow Swagat K Nayak (Insitute for Hydromechanics, Karlsruhe Institute of Technology); Markus Uhlmann (Insitute for Hydromechanics, Karlsruhe Institute of Technology)
15:40 #33: Towards modeling of soft deformable micro particles in dilute multiphase flow Jana Wedel (Friedrich-Alexander Universität Erlangen Nürnberg); Paul Steinmann (Friedrich-Alexander Universität Erlangen Nürnberg, University of Glasgow); Mitja Strakl(University of Maribor); Matjaz Hribersek (University of Maribor); Jure Ravnik (University of Maribor)
16:00 #200: Beyond coffee ring like pattern Appurva Tiwari (Shiv Nadar Institute of Eminence); Sehyun Shin (Korea University); Seong Jae Lee (The University of Suwon); Ashish K Thokchom (Shiv Nadar Institute of Eminence)

S2 OS: Numerical Modeling of Granular and Multiphase Flows 15:00−16:20, April 3, Room 401
Session Chair: Hiroaki Katsuragi (Osaka University)
15:00 #356: Bubble dynamics in melt pool of additive manufacturing based on MPS-DEM simulation Guangtao Duan (The University of Tokyo); Mikio Sakai (The University of Tokyo)
15:20 #703: Numerical investigation on the two-phase flow of hydraulic pipeline with the lateral vibration based on MPS-DEM method Renxiang Li (Shanghai Jiao Tong University); Fengze Xie (Shanghai Jiao Tong University); Decheng Wan (Shanghai Jiao Tong University)
15:40 #517: Comparison of Eulerian and CFD-DEM simulations of segregation behaviour of liquid-solid slurry flow through a horizontal channel Prantik Das (Indian Institute of Technology Delhi); Vivek V. Buwa (Indian Institute of Technology Delhi)
16:00 #730: Resolved CFD-DEM simulation of three-phase flows with non-spherical particles Kimiaki Washino (Osaka University); Ei Chan (Osaka University); Taichi Tsujimoto (Osaka University); Takuya Tsuji (Osaka University); Toshitsugu Tanaka (Osaka University)

S2 Topics: Modelling of Multiphase Flows 15:00−16:20, April 3, Room 402
Session Chair: Gretar Tryggvason (Johns Hopkins University)
15:00 #172: Comparison of population balance models for polydisperse bubbly flow in a constricted vertical pipe Victor Habiyaremye (NRG); Hans Kuerten (TU Eindhoven); Edo Frederix (NRG)
15:20 #570: Euler-Euler simulation of air-water flow in a bubble column using method of classes population balance: validation with radioactive particle tracking (RPT) Manoj Kumar Beriya (Indian Institute of Technology Delhi); Shantanu Roy (Indian Institute of Technology Delhi)
15:40 #486: Assessment of multi-fluid, shallow-water thin film and DPM approaches for the numerical simulation of a bearing chamber Nikolay K Kirov (Onera); Jean-Mathieu Senoner (Onera); Davide Zuzio (Onera); Mathieu Picard (Onera); Jean-Luc Estivalezes (Onera)
16:00 #173: Numerical modelling of water flashing at sub-atmopsheric pressure Clément Loiseau (EDF); Stéphane Mimouni (EDF); Dider Colmont (EDF); Stéphane Vincent (Université Gustave Eiffet)

S2 Topics: Experimental Methods for Multiphase Flows 15:00−16:20, April 3, Room 403
Session Chair: Ruud Henkes (Delft University of Technology)
15:00 #48: Shake-the-Box technique to investigate an elongated air bubble flowing in stagnant liquid , in a slightly inclined pipe Alexandre Boucher (University of Toulouse); Lucas Pavlov (University of Toulouse); Sébastien Cazin (UNiversity of Toulouse); Roel Belt (TotalEnergies); Alain A Liné (University of Toulouse)
15:20 #802: Pressure drop measurements of Taylor bubble in counter-current turbulent flow Jan Kren (Jožef Stefan Institute); Iztok Tiselj (Jožef Stefan Institute); Blaž Mikuž (Jožef Stefan Institute)
15:40 #545: Experiments on air-water slug flow in a horizontal pipe using high speed imaging Belma B Hadzovic (NTNU); Eirik Æsøy (NTNU); Paul R. Leinan (SINTEF); James R. Dawson (NTNU)
16:00 #675: Experimental analysis of three-phase gas-liquid-solid intermittent flows in vertical pipelines Ronaldo L Höhn (Universitat Rovira i Virgili); Sylvana Varela Ballesta (Universitat Rovira i Virgili); Youssef Stiriba (Universitat Rovira i Virgili)

S2 OS: Industrial Applications 15:00−16:20, April 3, Room 404
Session Chair: Koichi Terasaka (Keio University)
15:00 #512: Scale-up investigations of a jet loop reactor for the implementation of a chemical process in an alternative reactor concept Marc Maly (Hamburg University of Technology); Rafael Kuwertz (Ehrfeld Mikrotechnik GmbH); Joachim Heck (Ehrfeld Mikrotechnik GmbH); Michael Schlüter (Hamburg University of Technology)
15:20 #725: Impact driven scalable liquid encapsulation: a new paradigm in encapsulation methods Sirshendu Misra (University of Waterloo); Kumari Trinavee (University of Waterloo); Naga Siva Gunda (University of Waterloo); Sushanta Mitra (University of Waterloo)
15:40 #174: Adsorption rate prediction of activated carbon packed bed using CFD Yuma Kasai (Shizuoka University); Yoshinori Jinbo (Shizuoka University); Hideya Kamikawa (Toclas Corporation); Toshiyuki Sanada (Shizuoka University)
16:00 #424: Numerical modelling of flow in alkaline water electrolysers Morgan Kerhouant (Imperial College London); Thomas Abadie (University of Birmingham); Raj Venuturumilli (bp); Andre Nicolle (bp); Omar Matar (Imperial College London)

S2 Topics: Collision, Agglomeration and Breakup 15:00−16:20, April 3, Room 405
Session Chair: Martin Sommerfeld (Otto-von-Guericke-Universität Magdeburg)
15:00 #399: Influence of viscosity and surface wettability on drop-wall impact Ghoku Krishnan (University of Virginia); Kevin Fletcher (University of Virginia); Trevor Marchhart (University of Virginia); Eric Loth (University of Virginia)
15:20 #543: Obstruction of spreading droplets on a flat surface by non-deformable objects Marcus Horwich (Imperial College London); Yannis Hardalupas (Imperial College London)
15:40 #811: Fragmentation of water droplets dispersed in butter under mechanical agitation Antoine Violas (Laboratoire de Génie Chimique); Kevin Roger (Laboratoire de Génie Chimique); Paul Duru (Institut de Mécanique des Fluides de Toulouse); Olivier Masbernat (Laboratoire de Génie Chimique)
16:00 #145: Direct-numerical simulation of droplet breakup in homogeneous isotropic turbulence Palas Kumar Farsoiya (Princeton University); Luc Deike (Princeton University); Rodney O. Fox (Iowa State University)

S2 Topics: Cavitation/Nucleation 15:00−16:20, April 3, Room 406
Session Chair: Shin-ichi Tsuda (Kyushu University)
15:00 #313: Cavitation inception and its noise emissions during the interaction of a pair of line vortices Daniel Knister (University of Michigan); Harish Ganesh (University of Michigan); Steve Ceccio (Univ Of Michigan)
15:20 #393: Simultaneous high-speed observation in two-directions and measurement of impulsive pressure distribution for bubble collapse near a wall Kazuma Matsumoto (Osaka Metropolitan University); Hayato Kida (Osaka Metropolitan University); Toshiyuki Ogasawara (Osaka Metropolitan University); Hiroyuki Takahira (Osaka Metropolitan University)
15:40 #598: Evaluation of thermal effects in cavitating flow by heating of nozzle wall Junnosuke Okajima (Tohoku University); Kota Sato (Tohoku University)
16:00 #789: Influence of longitudinal grooves on Venturi cavitating flows Xu Meng (Tsinghua University); Zhigang Zuo (Tsinghua University); Shuhong Liu (Tsinghua University)

S2 OS: Bubbles and Drops (Bubbles) 15:00−16:20, April 3, Room 501
Session Chair: Roberto Zenit (Brown University)
15:00 #690: Visualization and measurement of foam flowing between two-dimensional narrow parallel plates Shimpei Saito (AIST); Soumei Baba (AIST); Naoki Takada (National Institute of Advanced Industrial Science and Technology); Satoshi Someya (AIST); Hiroshi Ito (AIST)
15:20 #239: A simulation of foam formation using multi-phase-field model and lattice Boltzmann method with adaptive mesh refinement Yos P Sitompul (Tokyo Tech); Takayuki Aoki (Tokyo Tech); Seiya Watanabe (Kyushu University); Kenta Sugihara (JAEA); Tomohiro Takaki (Kyoto Institute of Technology)
15:40 #567: Influence of particle surface properties on the stability of pickering foams Nick Brown (University of Oklahoma); Sepideh Razavi (University of Oklahoma)
16:00 #452: Lagrangian modeling of vapor bubble growth in flash boiling single droplet considering bubble-bubble interactions Avijit Saha (Institute for Combustion Technology); Abhishek Deshmukh (Institute for Combustion Technology); Temistocle Grenga (Institute for Combustion Technology); Heinz Pitsch (Institute for Combustion Technology)

S2 OS: Boiling, Condensation, Evaporation 15:00−16:20, April 3, Room 502
Session Chair: Matteo Bucci (MIT)
15:00 #736: Experimental investigation of inverted annular film boiling characteristics near the atmospheric pressure Kyung Mo Kim (University of Michigan); Adam Burak (University of Michigan); Joseph Kelly (The U.S. Nuclear Regulatory Commission); Stephen Bajorek (The U.S. Nuclear Regulatory Commission); Xiaodong Sun (University of Michigan)
15:20 #810: Effects of the ITO glass on the critical heat flux and boiling phenomena in a downward-faced flow boiling Zhenhan Hong (The University of Tokyo); Shuichiro Miwa (The University of Tokyo); Kai Wang (The University of Tokyo); Taishan Chen (The University of Tokyo); Koji Okamoto (The University of Tokyo)
15:40 #747: Heat transfer and flow characteristics of falling film evaporation with nucleate boiling on an inclined plate Tsutomu Ubara (Kobe University); Keisuke Hirai (Kobe University); Katsumi Sugimoto (Kobe University); Hitoshi Asano (Kobe University)
16:00 #511: Dynamics of forced flow boiling ebullition cycles at natural and artificial cavities Dapeng Yang (Imperial college london); Antonis Sergis (Imperial college london); Yannis Hardalupas (Imperial college london)

S2 Topics: Computational Techniques for Multiphase Flows 15:00−16:20, April 3, Room 503
Session Chair: Spencer Bryngelson (Georgia Institute of Technology)
15:00 #628: Lagrangian-Eulerian modeling of fuel-coolant interaction in nuclear reactor severe accidents Min-Soo Kim (Korea Maritime and Ocean University), Dong-Jin Shin (Korea Maritime and Ocean University), Dong-Ha Kim (Korea Maritime and Ocean University), Kwang-Hyun Bang (Korea Maritime and Ocean University)
15:20 #114: Numerical simulation of counter-current flow in a vertical pipe with rounded ends Michio Murase (Institute of Nuclear Safety System, Inc.); Toshiya Takaki (Institute of Nuclear Safety System, Inc.); Yoichi Utanohara (Institute of Nuclear Safety System, Inc.)
15:40 #493: Spreading of spilled low sulfur fuel oil (LSFO): a numerical study Jaebeen Lee (Seoul National Univ); Linfeng Piao (Seoul National Univ); Hyungmin Park (Seoul National Univ)
16:00 #286: A 3D wide-area simulation for real river flood disaster including driftwood with high resolution mesh Dawei Shen (Tokyo Institude of Technology); Takayuki Aoki (Tokyo Institude of Technology); Seiya Watanabe (Kyushu University); Shuji Moriguchi (Tohoku University); Shinsuke Takase (Hachinohe Institute of Technology); Masaaki Sakuraba (Nippon Koei)

S2 Topics: Interfacial Flows 15:00−16:20, April 3, Room 504
Session Chair: Jean-Christophe Hoarau (ONERA)
15:00 #44: Using branched ionic surfactants for enhanced spreading of aqueous formulations Nina M Kovalchuk (University of Birmingham); Masanobu Sagisaka (Hirosaki University); Hinata Komiyama (Hirosaki University); Nikhil Patani (University of Birmingham); James Haines (University of Birmingham); Mark Simmons (University of Birmingham)
15:20 #232: Ribbing patterns in rotating Landau-Levich drag-out problem. Rosie Cates (ENS Lyon); Pierre Trontin (Univ. Lyon / LMFA); J. John Soundar Jerome (Univ. Lyon / LMFA); Jean-Philippe Matas (Univ. Lyon / LMFA)
15:40 #374: An AI super-resolution method for subfilter modeling of interfacial flows Mathis Bode (Forschungszentrum Juelich GmbH)
16:00 #116: A depth–integral model for weakly–compressible falling films Paolo Botticini (Università degli studi di Brescia); Gianluca Lavalle (Mines Saint–Étienne); Davide Picchi (Università degli Studi di Brescia); Pietro Poesio (Università di Brescia)

S2 Topics: Non-Newtonian Multiphase Flows 15:00−16:20, April 3, Room 505
Session Chair: Koji Hasegawa (Kogakuin University)
15:00 #245: CFD analysis of a Taylor drop rising in co-current flow of non-Newtonian liquids Revathi Sri E (IIT Madras); S Vengadesan (IIT Madras)
15:20 #101: Thixotropic effects in oscillating droplets Matthias Ibach (Institute of Aerospace Thermodynamics (ITLR), University of Stuttgart); Jonas Steigerwald (Institute of Aerospace Thermodynamics (ITLR), University of Stuttgart); Bernhard Weigand ( Institute of Aerospace Thermodynamics (ITLR), University of Stuttgart)
15:40 #181: A conservative level set method for a rising gas bubble in a viscoelastic fluid William Doherty (Cardiff University); Timothy Phillips (Cardiff University); Zhihua Xie (Cardiff University)
16:00 #199: Numerical analysis of planar hydraulic jump in non-Newtonian thin film flow Banashree Samanta (IIT Kharagpur); Gargi Das (IIT Kharagpur); Subhabrata Ray (IIT Kharagpur); Manish Kaushal (IIT KHARAGPUR)