Room 402

S1 Topics: Modelling of Multiphase Flows 13:00−14:40, April 3, Room 402
Session Chair: Shu Takagi (The University of Tokyo)
13:00 #248: Assessment of INSS drift-flux correlation for rod bundle at low-flow and low-pressure conditions Ikuo Kinoshita (Institute of Nuclear Safety System, Inc.); Takashi Hibiki (City University of Hong Kong); Xiuzhong Shen (KU)
13:20 #237: Development of a diffuse interface methodology in a high-order flux-reconstruction framework Simon Blanchard (JAXA); Junya Aono (RCCM); Takanori Haga (JAXA)
13:40 #223: Resolved and unresolved: morphology transfers in OpenFOAM-hybrid Benjamin Krull (Helmholtz-Zentrum Dresden-Rossendorf (HZDR)); Richard Meller (Helmholtz-Zentrum Dresden-Rossendorf (HZDR)); Fabian Schlegel (Helmholtz-Zentrum Dresden-Rossendorf (HZDR)); Matej Tekavčič (Jožef Stefan Institute)
14:00 #516: Interface retaining coarsening of complex multiphase flows Xianyang Chen (Johns Hopkins University); Jiacai Lu (Johns Hopkins University); Gretar Tryggvason (Johns Hopkins University)
14:20 #669: A hybrid solver to resolve strong interactions between liquid films and gas flows David Barreiro-Villaverde (Universidade da Coruña); Anne Gosset (Universidade da Coruña); Miguel A. Mendez (von Karman Institute for Fluid Dynamics); Marcos Lema (Universidade da Coruña)

S2 Topics: Modelling of Multiphase Flows 15:00−16:20, April 3, Room 402
Session Chair: Gretar Tryggvason (Johns Hopkins University)
15:00 #172: Comparison of population balance models for polydisperse bubbly flow in a constricted vertical pipe Victor Habiyaremye (NRG); Hans Kuerten (TU Eindhoven); Edo Frederix (NRG)
15:20 #570: Euler-Euler simulation of air-water flow in a bubble column using method of classes population balance: validation with radioactive particle tracking (RPT) Manoj Kumar Beriya (Indian Institute of Technology Delhi); Shantanu Roy (Indian Institute of Technology Delhi)
15:40 #486: Assessment of multi-fluid, shallow-water thin film and DPM approaches for the numerical simulation of a bearing chamber Nikolay K Kirov (Onera); Jean-Mathieu Senoner (Onera); Davide Zuzio (Onera); Mathieu Picard (Onera); Jean-Luc Estivalezes (Onera)
16:00 #173: Numerical modelling of water flashing at sub-atmopsheric pressure Clément Loiseau (EDF); Stéphane Mimouni (EDF); Dider Colmont (EDF); Stéphane Vincent (Université Gustave Eiffet)

S3 Topics: Modelling of Multiphase Flows 11:00−12:20, April 4, Room 402
Session Chair: Matthias Meinke (RWTH Aachen University)
11:00 #466: Experimental and computational modeling of solid-liquid mixing in an oscillatory baffled reactor containing multi-orifice baffle geometry Partha Pratim Mondal (Indian Institute of Technology, Delhi); Rohan Jain (Helmholtz-Zentrum Dresden-Rossendrof, Helmholtz Institute Freiberg for Resource Technology); Shaikh Z. Ahammad (Indian Institute of Technology, Delhi)
11:20 #319: Gas liquid flow in hilly terrain pipelines – single and multiple sections Yehuda Taitel (Tel Aviv University); Dvora Barnea (Tel Aviv University)
11:40 #647: Numerical Simulation of Two-phase CO2 Ejector Flows Using the Implicit Density-based SU2 Solver and Comparative Analysis of HEM and HRM Models Antoine Metsue (UCLouvain); Sebastien Poncet (Université de Sherbrooke); Yann Bartosiewicz (Université Catholique de Louvain)
12:00 #748: Direct numerical simulation of boiling in microgravity conditions Loric Torres (IMFT); Catherine Colin (IMFT); Sébastien Tanguy (IMFT); Annafederica Urbano (ISAE-SUPAERO)

S4 Topics: Modelling of Multiphase Flows 14:20−15:40, April 4, Room 402
Session Chair: Sébastien Tanguy (Université Paul Sabatier - Toulouse)
14:20 #143: A model for tracking superellipsoidal particles in multiphase flows Mitja Štrakl (University of Maribor); Jana Wedel (Friedrich-Alexander Universität Erlangen Nürnberg); Matjaz Hribersek (University of Maribor, Faculty of Mechanical Engineering); Paul Steinmann (Chair of Applied Mechanics, Friedrich-Alexander University Erlangen-Nürnberg); Jure Ravnik (University of Maribor)
14:40 #386: Assessment of point-particle models for non-spherical particles in turbulent flow Laurent André (RWTH Aachen University); Thede Peter Kiwitt (RWTH Aachen University); Matthias Meinke (RWTH Aachen University); Wolfgang Schröder (RWTH Aachen University)
15:00 #462: Understanding the motion of selected dry-coated powders in swirl-based dry powder inhalation devices Francesca O Alfano (University of Calabria); Alberto Di Renzo (University of Calabria); Francesco Paolo Di Maio (University of Calabria)
15:20 #606: Wavelet-based kinematic simulation of particle-laden flows Roxane Letournel (Safran); Marc Massot (CMAP, Ecole Polytechnique); Aymeric Vié (EM2C, CentraleSupélec)

S5 Topics: Modelling of Multiphase Flows 16:00−17:20, April 4, Room 402
Session Chair: Alberto Di Renzo (University of Calabria)
16:00 #756: Simulations of the flow of viscous oil with water in a horizontal pipe Haoyu Li (Delft University of Technology); M.J.B.M. Pourquie (Delft University of Technology); G. Ooms (Delft University of Technology); Ruud Henkes (Delft University of Technology)
16:20 #194: Phase inversion modeling in oil-water-gas three-phase annular-duct flow Johann E Castro (University of São Paulo); Oscar Rodriguez (University of São Paulo)
16:40 #710: Simulation of two-phase air / water flows in bubbly flow in horizontal pipe Bruno Raverdy (CEA)
17:00 #661: Modelling of stratified flows and slug flow transition with an all flow regime CFD model Marco Colombo (University of Sheffield)

S6 Topics: Modelling of Multiphase Flows 11:00−12:40, April 5, Room 402
Session Chair: François-Xavier Demoulin (University of Rouen Normandy)
11:00 #29: A coupled CFD model of lyophilization for the laboratory freeze dryer case Blaz Kamenik (University of Maribor, Faculty of Mechanical Engineering); Matej Zadravec (University of Maribor, Faculty of Mechanical Engineering); Jure Ravnik (University of Maribor); Matjaz Hribersek (University of Maribor, Faculty of Mechanical Engineering)
11:20 #176: High-fidelity modeling of the drying kinetics and lifetimes of saliva droplets in airborne transmission of COVID-19 Gizem Özler (physikalisch technische bundesanstalt); Holger Grosshans (physikalisch technische bundesanstalt)
11:40 #395: Particle-resolved study of wetting in a trickle bed reactor Arvin Tavanaei (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology)
12:00 #261: Hydrodynamics inside packed beds of spherocylinders; magnetic resonance imaging and pore network modelling approaches Ali Fathiganjehlou (TU Eindhoven); Noah Romijn (TU Eindhoven); Y.E.I. (Yasmine) Bergmans (TU Eindhoven); E.A.J.F. (Frank) Peters (TU Eindhoven); Maike Baltussen (Eindhoven University of Technology); K.A. (Kay) Buist (TU Eindhoven); J.A.M. (Hans) Kuipers (TU Eindhoven)
12:20 #610: Pore network modeling of packed beds of non-spherical particles Amirhossein Eghbalmanesh (Eindhoven University of Technology); Ali Fathiganjehlou (TU Eindhoven); Martijn Hoogendoorn (Eindhoven University of Technology); Marijana Miloshevska (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Frank Peters (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology)

S7 Topics: Modelling of Multiphase Flows 13:50−15:30, April 5, Room 402
Session Chair: Marco Colombo (University of Sheffield)
13:50 #471: Aeration of large free-falling jet and its impact on solid ground and liquid ponds Diego Ferrando (Université de Rouen Normandie); Hakim Hamdani (Université de Rouen Normandie); Javier Anez (EDF); Yvan Bercovitz (EDF); Benjamin Duret (Université de Rouen Normandie); Julien Reveillon (Université de Rouen Normandie); François-Xavier Demoulin (Université de Rouen Normandie)
14:10 #456: Numerical investigation of the break-up of liquid jets and sheets in a gas media. Cristina Garcia Llamas (Eindhoven University of Technology); Vivekanand V Swami (Eindhoven University of Technology); Vilena Petrova (Eindhoven University of Technology); Koen Jennekens (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology)
14:30 #532: A multi-scale Eulerian-Lagrangian method based on unstructured AMR for the simulation of atomization Ibtissam El Yamani (CORIA); Romain Janodet (CORIA); Mélody Cailler (Safran Tech); Renaud Mercier (Safran Tech); Vincent Moureau (CORIA)
14:50 #372: High-fidelity simulation of a pressure swirl fuel atomizer: in-depth analysis of in-nozzle flow dynamics and liquid sheet disintegration Julien Carmona (CORIA); Julien Leparoux (Safran Tech); Vincent Moureau (CORIA)
15:10 #275: A numerical study of the influence of heated atomization gas on the compressible two-phase flows in a close-coupled atomizer Alexander Ariyoshi Zerwas (University of São Paulo); Manuel Falcone (John Wood Group PLC ); José Luis de Paiva (University of São Paulo); Roberto Guardani (University of São Paulo); Lydia Achelis (University Bremen); Udo Fritsching (University Bremen)

S8 Topics: Modelling of Multiphase Flows 16:00−17:40, April 5, Room 402
Session Chair: Matjaz Hribersek (University of Maribor)
16:00 #642: A two-scale two-phase flow model with capillarity and small-scale reduced-order model based on a geometric method of moments Arthur Loison (CMAP, École polytechnique); Samuel Kokh (CEA); Teddy Pichard (CMAP, École polytechnique); Marc Massot (CMAP, Ecole Polytechnique)
16:20 #845: Development of numerical prediction method for bubble coalescence phenomenon under the mercury flows Gen Ariyoshi (Japan Atomic Energy Agency); Kei Ito (Kyoto University); Hiroyuki Kogawa (Japan Atomic Energy Agency); Masatoshi Futakawa (Japan Atomic Energy Agency)
16:40 #862: Swirling gas-liquid vertical pipe flow: a mechanistic modelling framework Matheus M. Garcia (Delft University of Technology); Dion Ammerlaan (Delft University of Technology); Bart van der Zalm (Delft University of Technology); Luis Portela (Delft University of Technology)
17:00 #149: On the simulation of two-phase cross-flow in a tube bundle guided by experimental forces spectra Clément Bazin (CEA); Maria-Giovanna Rodio (CEA); Romain Lagrange (CEA); Christophe Josserand (LadHyX, CNRS & E. Polytechnique)
17:20 #405: Explainable AI for multifluid flow: how does a trained convolutional neural network interpret droplet coalescence in diamond-shaped microchannel? Masahiro Furuya (Waseda University); Tomoya Murashige (Waseda University); Hirotaka Tanaka (Waseda University); Kohei Yamanaka (Waseda University); Manabu Asahi (Waseda University); Daiki Tanaka (Waseda University); Tetsushi Sekiguchi (Waseda University); Shuichi Shoji (Waseda University)

S9 Topics: Modelling of Multiphase Flows 11:00−12:20, April 6, Room 402
Session Chair: Daegyoum Kim (KAIST)
11:00 #324: Derivation of drag and lift forces and torques experienced by non-spherical particles in wall-bounded linear shear flow Victor Chéron (Otto-von-Guericke Universität); Manuel A Taborda (Otto von Guericke University Magdeburg); Martin Sommerfeld (Otto-von-Guericke University Magdeburg); Berend van Wachem (University of Magdeburg)
11:20 #542: Oscillations of a micro bubble under a free interface Gautier Dussuyer (IMFT/Poietis); Antonio Iazzolino (Poietis); Dominique Legendre (IMFT)
11:40 #344: Effect of droplet injection in the hydrodynamic of a riser system Juan G Ramirez (Eindhoven University of Technology); Levi Peene (Eindhoven University of Technology); Maike Baltussen (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology)
12:00 #786: Derivation of fully closed two-phase models of Baer-and-Nunziato type Vincent Perrier (INRIA)

S10 Topics: Modelling of Multiphase Flows 14:20−15:40, April 6, Room 402
Session Chair: Dimitrios Papavassiliou (University of Oklahoma)
14:20 #129: Experimental and numerical investigation of a multiphase flow in a rectangular channel at moderate Mach numbers Benedikt Faraji-Tajrishi (University of Stuttgart Insitute of Aerospace Thermodynamics); Philipp Wellinger (University of Stuttgart Insitute of Aerospace Thermodynamics); Marwan Khaled (University of Stuttgart Insitute of Aerospace Thermodynamics); Marius Forster (University of Stuttgart Insitute of Aerospace Thermodynamics); Bernhard Weigand (University of Stuttgart Insitute of Aerospace Thermodynamics)
14:40 #260: Surface waves of high Reynolds-number film flow over a rotating disk Dong Ju Kim (KAIST); Daegyoum Kim (KAIST)
15:00 #234: Experimental studies on velocities of gas- and solid-phases in gas–liquid–solid three-phase flow for subsea resource productions Satoru Takano (National Maritime Research Institute); Sotaro Masanobu (National Maritime Research Institute); Shigeo Kanada (National Maritime Research Institute); Masao Ono (National Maritime Research Institute)
15:20 #137: Hydrodynamics of gas-liquid flow in jumpers of subsea gas production systems Alexander Yurishchev (Tel Aviv University); Benny Ravid (Tel Aviv University); Amos Ullmann (Tel Aviv University); Neima Brauner (Tel-Aviv University)

S12 Special Session: Machine Learning for Multiphase Flows 10:10−11:50, April 7, Room 402
Session Chair: Omar Matar (Imperial College London)
10:10 #879: Physics-inspired machine learning for multiphase flow modeling Sivaramakrishnan Balachandar (University of Florida)
10:30 #875: Examples of the use of machine learning for multiphase flow predictions Gretar Tryggvason (Johns Hopkins University); Jiacai Lu (Johns Hopkins University)
10:50 #878: Application of AI Super-Resolution Modeling to Multiphase Flows Including Source Terms Mathis Bode (RWTH Aachen University)
11:10 #877: Data-driven shape optimisation of chemical reactors Nausheen Basha (Imperial College London); Thomas Savage (Imperial College London); Ehecatl Antonio del Rio Chanona (Imperial College London); Omar K. Matar (Imperial College London)
11:30 #876: Modelling Local steady-state and time-dependent flow and transport in porous media by multiscale neural networks Agnese Marcato (Politecnico di Torino); Javier E. Santos (Los Alamos National Laboratory); Chaoyue Liu (LRCS); Gianluca Boccardo (Politecnico di Torino); Alejandro A. Franco (LRCS); Masa Prodanovic (University of Texas at Austin); Daniele Marchisio (Politecnico di Torino);