Room 404
- S1 OS: Industrial Applications
- S2 OS: Industrial Applications
- S3 OS: Industrial Applications
- S4 OS: Industrial Applications
- S5 OS: Fundamentals and Applications of Fine Bubble Technology
- S6 OS: Fluidization
- S7 OS: Fluidization
- S8 OS: Fluidization
- S9 Topics: Colloidal and Suspension Dynamics
- S10 Topics: Instabilities
- S11 Topics: Instabilities
- S12 Topics: Instabilities
S1 OS: Industrial Applications 13:00−14:40, April 3, Room 404
Session Chair: Boris Balakin (Western Norway University of Applied Sciences)
13:00 | #43: Experimental investigation of the transition between intermittent and annular two-phase flow through orifice plates | Charlie Geest (UNICAMP); Marcelo S Castro (UNICAMP) |
13:20 | #225: Device for applying an ophthalmic medicament mist | Moshe Tshuva (Afeka, Tel-Aviv Academic College of Engineering); Joshua Altman (Afeka, Tel-Aviv Academic College of Engineering) |
13:40 | #838: Investigation of spreading behavior with fragmentation of a wall-impinging liquid jet in a shallow pool | Naoki Horiguchi (Japan Atomic Energy Agency); Hiroyuki Yoshida (Japan Atomic Energy Agency); Akiko Kaneko (University of Tsukuba); Yutaka Abe (University of Tsukuba) |
14:00 | #681: Influence of hydrate-like particles on the horizontal three-phase solid-liquid-gas slug flow pattern | Stella Cavalli (NUEM - UTFPR); Vitor O. O. Machado (NUEM); Gianluca Lavalle (Centre SPIN - Mines Saint-Etienne); Moisés Marcelino Neto (NUEM - UTFPR); Amadeu K Sum (Colorado School of Mines); Ana Cameirão (Centre SPIN - Mines Saint-Etienne); Rigoberto E. M. Morales (NUEM - UTFPR) |
14:20 | #22: Influence of the operation conditions and the geometry on the gas entrainment in a sodium fast reactor mock-up | David Guenadou (CEA); Philippe Aubert (CEA), Jean-Philippe Descamps (CEA) |
S2 OS: Industrial Applications 15:00−16:20, April 3, Room 404
Session Chair: Koichi Terasaka (Keio University)
15:00 | #512: Scale-up investigations of a jet loop reactor for the implementation of a chemical process in an alternative reactor concept | Marc Maly (Hamburg University of Technology); Rafael Kuwertz (Ehrfeld Mikrotechnik GmbH); Joachim Heck (Ehrfeld Mikrotechnik GmbH); Michael Schlüter (Hamburg University of Technology) |
15:20 | #725: Impact driven scalable liquid encapsulation: a new paradigm in encapsulation methods | Sirshendu Misra (University of Waterloo); Kumari Trinavee (University of Waterloo); Naga Siva Gunda (University of Waterloo); Sushanta Mitra (University of Waterloo) |
15:40 | #174: Adsorption rate prediction of activated carbon packed bed using CFD | Yuma Kasai (Shizuoka University); Yoshinori Jinbo (Shizuoka University); Hideya Kamikawa (Toclas Corporation); Toshiyuki Sanada (Shizuoka University) |
16:00 | #424: Numerical modelling of flow in alkaline water electrolysers | Morgan Kerhouant (Imperial College London); Thomas Abadie (University of Birmingham); Raj Venuturumilli (bp); Andre Nicolle (bp); Omar Matar (Imperial College London) |
S3 OS: Industrial Applications 11:00−12:20, April 4, Room 404
Session Chair: Xiaodong Sun (University of Michigan)
11:00 | #551: Experimental study of plugging in a cohesive slurry of ice | Boris V Balakin (Western Norway University of Applied Sciences); Pavel Struchalin (Western Norway University of Applied Sciences) |
11:20 | #611: Detection of solid-liquid phase changes of LiCl-KCl binary mixture by electrical impedance spectroscopy with platinum-wire electrode (pw-EIS) | So Segawa (Chiba university); Yosephus A K Prayitno (Chiba University); Prima Sejati (Chiba university); Miku Arisato (Kyushu university); Noritaka Saito (Kyushu University); Masahiro Takei (Chiba University) |
11:40 | #738: Visualization of spatio-temporal void fraction of vertical gas-liquid two-phase flow by coupled multiple current-voltage with wire-mesh sensor and convolutional neural network (MCV-WMS-CNN) | Yosephus A K Prayitno (Chiba University); Daisuke Saito (Chiba University); Shuichiro Miwa (The University of Tokyo); Masahiro TAKEI (Chiba University) |
12:00 | #740: Flow visualisation and flow patterns in a flat-plate polypropylene pulsating heat pipe | Ali Alqahtani (University of Liverpool); Volfango Bertola (University of Liverpool) |
S4 OS: Industrial Applications 14:20−15:40, April 4, Room 404
Session Chair: Isao Kataoka (Institute of Nuclear Safety System)
14:20 | #455: Modeling simulation assisted optimal process control for sandblasting operation | Nguyen Van Bo (ASTAR); Si Bui Quang Tran (ASTAR); Henry Kou Feng Cheng (ASTAR); Ahluwalia Kunal(ASTAR); Chow Cher Wong(ASTAR); Victor Quek(ASTAR); Kterry Tan (ASTAR); ang Chang Wei (ASTAR) |
14:40 | #154: Numerical modeling and simulation of transport and deposition of dust particles on ground mounted photovoltaic arrays | Cheikhna Talebmoustaph (TotalEnergies); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)); Maxime Pallud (TotalEnergies); Priyank Maheshwari (TotalEnergies) |
15:00 | #334: Thermocatalytic decomposition of methane in a fluidized bed – experimental study of fluidization of growing catalyst particles | Morteza Hadian (Eindhoven university of Technology); Danny Marrevee (Eindhoven university of Technology); Kay Buist (Eindhoven University of Technology); Bernard Reesink (BASF); Rene Bos (Shell); Sander van Bavel (Shell); Hans Kuipers (Eindhoven University of Technology) |
15:20 | #243: Influence of a co-flow on the velocity field of a particle-laden jet issuing into a confined tube | Elliott W Lewis (University of Adelaide); Zhiwei Sun (University of Adelaide); Matthew Gill (Calix Ltd.); Matthew Boot-Handford (Calix Ltd.); Mark Sceats (Calix Ltd.); Graham Nathan (University of Adelaide) |
S5 OS: Fundamentals and Applications of Fine Bubble Technology 16:00−17:00, April 4, Room 404
Session Chair: Hisato Minagawa (The University of Shiga Prefecture)
16:00 | #265: Coupling effects of ionic surfactants and electrolytes on the stability of bulk nanobubbles | Xiaotong Ma (Tsinghua University); Mingbo Li (Tsinghua University); Xuefei Xu (Tsinghua University); Chao Sun (Tsinghua University) |
16:20 | #498: Local mass transfer phenomena of fine bubbles in biocatalytic processes | Lotta Kursula (Hamburg University of Technology); Zeynep Percin (Hamburg University of Technology); Marko Hoffmann (Hamburg University of Technology); Andreas Liese (Hamburg University of Technology); Koichi Terasaka (Keio University); Michael Schluter (Hamburg University of Technology) |
16:40 | #764: Ultrafine bubble generation in condensate of steam accompanying with gas | Koichi Terasaka (Keio University); Kota Taguchi (Keio University); Satoko FUJIOKA (Keio University); Tomoya Tetsuka (Keio University) |
S6 OS: Fluidization 11:00−12:40, April 5, Room 404
Session Chair: Olivier Masbernat (CNRS / Toulouse INP)
11:00 | #278: Modeling a fluidized bed of growing catalyst particles: coupling CFD-DEM with MGM | Morteza Hadian (Eindhoven University of Technology); Kay Buist (Eindhoven University of Technology); Hans Kuipers (Eindhoven University of Technology) |
11:20 | #376: CFD-DEM simulation of continuous particle drying in a countercurrent fluidized bed fitted with large hole perforated plates | Kuang-Sin Pan (National Taiwan University); An-Ni Huang (Chang Gung University); Wan-Yi Hsu (Chang Gung University); Hsiu-Po Kuo (National Taiwan University) |
11:40 | #489: Coarse graining strategy for DEM modelling of triboelectric charging in circulating fluidized bed riser | Erasmo Salvatore Napolitano (University of Calabria); Alberto Di Renzo (University of Calabria); Francesco Paolo Di Maio (University of Calabria) |
12:00 | #495: Investigating the (de-)fluidization behavior of combusted iron fines in a fluidized bed using coupled CFD-DEM | Xin Liu (Power and Flow, Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology) |
12:20 | #775: Density segregation of granular materials in vibrated gas-fluidized bed (influence of gas inflow and vibration conditions) | Takuya Tsuji (Osaka University); Yuu Nogami (Osaka University); Jiang Zhaohua (Osaka University); Jun Oshitani (Okayama University of Science); Kimiaki Washino (Osaka University); Toshitsugu Tanaka (Osaka University) |
S7 OS: Fluidization 13:50−15:30, April 5, Room 404
Session Chair: Toshitsugu Tanaka (Osaka University)
13:50 | #825: Modelling of pseudo-turbulence and fluid turbulence modulation in liquid-solid fluidized bed by using Rij-epsilon SSG turbulence model | Almir GSL Ritta (Institut National Polytechnique de Toulouse); Renaud Ansart (Institut National Polytechnique de Toulouse); Olivier Simonin (Institut National Polytechnique de Toulouse) |
14:10 | #721: Second and third moments of liquid and solid phase velocity distributions in homogeneously fluidized inertial suspensions | Elise Almeras (IFP Energies nouvelles); Olivier Masbernat (Laboratoire de Génie Chimique); Frédéric Risso (Institut de mécanique des Fluides de Toulouse); Rodney O. Fox (Iowa State University) |
14:30 | #287: Numerical modeling of induction heating fluidized-bed reactor for hydrogen production using methane pyrolysis | Mino Woo (Korea Institute of Industrial Technology); Gyeong-min Kim (Korea Institute of Industrial Technology); Yoon-ho Bae (Pusan National University); Dong-ha Lim (Korea Institute of Industrial Technology) |
14:50 | #353: A comprehensive assessment of the effect of the collision parameters on the hydrodynamics of a pseudo-2D fluidized bed | Mohsen Zarepour (University of Saskatchewan); Donald J. Bergstrom (University of Saskatchewan); L. Zhang (University of Saskatchewan); Raymond J. Spiteri (University of Saskatchewan) |
15:10 | #464: On the modeling of the subgrid-scale production of uncorrelated random particle kinetic energy in coarse grid two-fluid model simulations of gas-solid flows | Baptiste Hardy (Institut de Mécanique des Fluides de Toulouse); Pascal Fede (Institut de Mécanique des Fluides de Toulouse (IMFT)); Olivier Simonin (Institut de Mecanique des Fluides de Toulouse (IMFT)) |
S8 OS: Fluidization 16:00−17:40, April 5, Room 404
Session Chair: Olivier Simonin (Institut de Mecanique des Fluides de Toulouse)
16:00 | #205: An experimental study of slug behavior in 2D gas-solid tapered fluidized beds | Lipak Sahoo (Indian Institute of Technology Madras); Sabita Sarkar (Indian Institute of Technology Madras) |
16:20 | #713: Cylindrical particles behavior in a liquid/solid fluidized bed | Kamel Landal Otmani (IFP Energies nouvelles); Rim Brahem (IFP Energies nouvelles); Elise Almeras (IFP Energies nouvelles) |
16:40 | #269: Prediction of high temperature minimum fluidization of cohesive metallic particles | Conrad Hessels (Eindhoven University of Technology); Giulia Finotello (Eindhoven University of Technology); Yali Tang (Eindhoven University of Technology); Tess Homan (Eindhoven University of Technology); Niels G Deen (Eindhoven University of Technology) |
17:00 | #591: Mixing/segregation behaviors for density difference of binary particles in a vibro-fluidized bed | Yoshihide Mawatari (Kyushu Institute of Technology); Naoki Iwamura (Kyushu Institute of Technology) |
17:20 | #626: Evaluation of attrition and fragmentation tendency of limestone-based sorbents for sorption-enhanced gasification in dual interconnected fluidized bed reactors | Antonio Coppola (STEMS-CNR); Fabio Montagnaro (University Federico II of Naples); Fabrizio Scala (University Federico II of Naples) |
S9 Topics: Colloidal and Suspension Dynamics 11:00−12:20, April 6, Room 404
Session Chair: Toru Ishigami (Hiroshima University)
11:00 | #219: Can ion adsorption stabilize bulk nanobubbles | Mingbo Li (Tsinghua University); Xiaotong Ma (Tsinghua University); Chao Sun (Tsinghua University) |
11:20 | #325: Complex viscosity of dilute bubble suspensions in unsteady shear flows | Kohei Ohie (Hokkaido University); Yuji Tasaka (Hokkaido University); Yuichi Murai (Hokkaido University) |
11:40 | #83: Direct numerical simulations of Quincke rollers with fully resolved hydrodynamics | Shun Imamura (Kyoto UNiversity); Takuya Kobayashi (Kyoto UNiversity); John J. Molina (Kyoto UNiversity); Ryoichi Yamamoto (Kyoto UNiversity) |
12:00 | #271: Simulation of collision events in flotation under the influence of gravity | Benedikt Tiedemann (TU Dresden); Jochen Fröhlich (TU Dresden) |
S10 Topics: Instabilities 14:20−15:40, April 6, Room 404
Session Chair: Hyungmin Park (Seoul National University)
14:20 | #119: Stability of two-phase stratified flow: effect of channel geometry | Ilya Barmak (Tel Aviv University); Alexander Gelfgat (Tel Aviv University); Neima Brauner (Tel-Aviv University) |
14:40 | #354: Effect of Plateau-Rayleigh instability on the transition of stratified liquid-liquid flow | Pedro José Miranda Lugo (University of São Paulo); Jorge Enrique Arrollo Caballero (universidade de são paulo); Marlon Hernandez Cely (Federal University of Pelotas); Oscar Hernandez Rodriguez (University of São Paulo) |
15:00 | #535: Experimental investigation of the transition between linear sloshing to chaotic regimes | Jean Muller (von Karman Institute (VKI)); Antonio Cantiani (von Karman Institute (VKI)); Philippe Planquart (von Karman Institute (VKI)); Delphine Laboureur ( von Karman Institute (VKI)) |
15:20 | #98: Sloshing in a food processor | Tomoaki Watamura (Kyoto Institute of Technology); Kazuyasu Sugiyama (Osaka University) |
S11 Topics: Instabilities 16:00−17:00, April 6, Room 404
Session Chair: Oscar Rodriguez (University of Sao Paolo)
16:00 | #724: Photoelastic measurement and numerical investigation on viscous fingering | Misa Kawaguchi (Tokyo University of Agriculture and Technology); Harumi Yagi (Tokyo University of Agriculture and Technology); Ryuta X. Suzuki (Tokyo University of Agriculture and Technology); Masakazu Muto (Nagoya Institute of Technology); Yuichiro Nagatsu (Tokyo University of Agriculture and Technology); Yoshiyuki Tagawa (Tokyo University of Agriculture and Technology) |
16:20 | #695: Contact line driven instability of thin fluid film over spherical surface | Ananthan Mohan (Indian Institute of Science Bangalore); Gaurav Tomar (Indian Institute of Science Bangalore) |
16:40 | #688: Dynamics of liquid alloy elongation and pinch-off process | Mengjia Ren (Kyushu University); Haruka Yasuhara (Kyushu University); Zhengying Wang (Kyushu University); Chihiro Inoue (Kyushu University) |
S12 Topics: Instabilities 10:10−11:10, April 7, Room 404
Session Chair: Tomoaki Watamura (Kyoto Institute of Technology)
10:10 | #750: Theoretical study of metal pad roll instability in a liquid metal battery. | Antoine Simon (INSA Rouen Normandie); Marie-Charlotte Renoult (INSA Rouen Normandie); Jorge César Brändle de Motta (CORIA); Christophe Dumouchel (CORIA / CNRS) |
10:30 | #781: Interfacial instabilities on the miscible liquids column generated by a rising deformable bubble | Kyuseong Choi (Seoul Nat'l Univ.); Hyungmin Park (Seoul Nat'l Univ.) |
10:50 | #818: Viscous theory for three-layer Rayleigh-Taylor instability | Antoine Simon (INSA Rouen Normandie); Marie-Charlotte Renoult (INSA Rouen Normandie) |